RMX™ 4000
During the first-time power-up the red ERR LED on the RMX’s front panel remains
ON until both the Management and IP Network Services have been defined.
Installation Quick Start Guide for
RMX 4000
•
•
•
Two people are required to lift the MCU out of the box and when installing it in a
rack.
3
4
Remove the USB key.
LAN 4, LAN 5 and the Serial ports are only for debugging and not for customer
use.
Enter the IP address of the RMX Control Unit and press Enter.
Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5 ports.
Basic Setup
Modifying the USB Key Settings
Before installing the RMX 4000 and performing the Basic Setup, please read the
General Safety Precautions described in the Polycom RMX 4000 Hardware Guide.
For a detailed description of Unpacking and Rack mounting instructions, and
connecting a DC system, see the Polycom RMX 4000 Hardware Guide.
1
Insert the USB key provided with your system into the PC workstation and double-
click LanConfigUtility.exe to start the utility.
MPM+ Cards & LEDs
Fan Drawer
Enter POLYCOM.
Enter POLYCOM.
Fan &
Power
Status
LEDs
Click Login.
Fabric Switch
Module
(FSM 4000)
2
Modify the parameters in the utility’s dialog box using the information supplied by
your network administrator.
5
Logo Panel &
ESD Connector
3
4
Click OK.
Remove it from the PC.
Click to connect to Polycom
web site and register the
RMX.
Click Product Registration
and follow the on screen
instructions to obtain the
Product Activation Key.
Optional CPU
(Future)
First-time Power-up and Connection to MCU
Power Supply Drawers
and Status LEDs
Control Unit
(CNTL 4000) &
LEDs
1
Insert the USB key containing the modified IP addresses in the USB port on the
RMX’s back panel.
Enter or paste the Product
Activation Key obtained.
E1/T1 Connection to RTM ISDN
LAN Connections to Port 2 on each RTM LAN
LAN Connections to Port 1 on RTM ISDN
Signalling
Network
(Port 3)
Click OK.
6
.
Management
Network
(Port 2)
Shelf
Management
(Port 6 on
RTM IP)
Off/On
Switch
2
Power the RMX ON.
The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s
memory and applied during the power-up sequence.
Power Cables
System power-up sequence may take up to five minutes.
1
DOC2554A
|
Peavey Stereo Amplifier Bass Preamplifier User Manual
Pentax Camcorder PC 330 User Manual
Philips CRT Television TP 2785C User Manual
Philips Digital Photo Frame SPF1027 05 User Manual
Planar Car Video System PL1500M User Manual
Planet Technology Network Card WL 8310 User Manual
Polaroid Digital Camera IM1836BLK User Manual
Powermate Portable Generator PMC401857 User Manual
Precisionaire Air Cleaner PB1403 User Manual
Premier Mounts Indoor Furnishings PTM User Manual