™
Earlite 1100
User’s Guide
STEP Communications
625 River Oaks Parkway
San Jose, CA 95134
Tel. 408-474-0272
xꢀ
xꢀ
xꢀ
xꢀ
xꢀ
xꢀ
xꢀ
Overview ……………………………………….…. 1
Getting Started …... …………………………….…. 2
Features & Controls …………………………….…. 3
Using the Multi-Function Control ………………….. 4
Charging Your Earpiece …………………………… 5
Charging & LED Status Matrix ……………………. 6
Connecting Your Earpiece to the Charger ………….. 7
Adjusting Your Earpiece for Maximum Comfort …… 9
Pairing the Earpiece to Your Phone ………….…… 13
Resetting the Earpiece ……………………………. 15
General Operation ……………………………….. 16
(On/Off, volume control, making calls, voice dialing,
answering calls, muting calls)
Quick Reference Guide …………………………… 23
Troubleshooting ………………………………….. 24
Technical Specifications ……………………………25
End User Limited Product Warranty ………………. 26
xꢀ
xꢀ
xꢀ
xꢀ
xꢀ
xꢀ
xꢀ
LED color
Constant
Red
Battery or Charging Status
Flashing
Green
Solid
Green
1 Orange
flash
xꢀ
with your
other hand
q
With the earpiece turned off,
To turn the Earpiece on:
xꢀ
To turn the Earpiece off:
xꢀ
xꢀ
xꢀ
xꢀ Note:
Note:
To answer a call using the earpiece
Answering a second call (if your phone supports
multiple incoming calls)
xꢀ
rotate and
hold
not
To turn the unit on: depress & hold down the multi-
function control for 2 seconds or until the LED flashes green
To initiate the pairing process: the unit must first be turned
off. Next, depress & hold down the multi-function control
for 5 seconds or until the LED flashes green and red
To answer a call or transfer call from phone to earpiece:
briefly press the multi-function control down once.
To end a call: briefly press the multi-function control down
once or terminate the call from your cellular phone
To mute a call: rotate & hold the multi-function control
forward for 5 seconds. Rotate the control again to unmute.
To adjust volume: when wearing the unit, to increase the
volume, rotate the multi-function control forward two times for
each incremental level. To decrease the volume, rotate the multi-
function control backwards two times for each incremental level
To turn the unit off: depress & hold down the multi-
function control for 4 seconds or until the LED stops flashing.
Earpiece & Horn
Frequency Response
Distortion (THD %)
Microphone
300 to 3400 Hz
2% (typical)
Frequency Response
S/N Ratio
300 to 3400 Hz
36 dB @ 1 KHz
Wireless Link Type
Frequency
Useful Range
Compliance
Bluetooth Radio Module (Profile v1.1)
2.4 GHz - ISM Band (2400-2483.5 MHz)
10 meters from device
UL, FCC Part 15, EN 300 328-2, CE,
ETS300-328, IC RSS-210, Bluetooth™
Operating Temperature: 0C to +40C
Weight
Size
Earpiece: ~22 grams / Charger: ~65 grams
Earpiece: 72 mm L x 63 mm H x 13 mm T
~4 hours
Average Talk Time
Average Standby Time ~110 hours
Battery Type
Battery Charger
Lithium-Polymer
US charger: 100 to 240VAC input
4.5 – 9.5Voutput, min. 450mA output
2 hours to 80%, 4 hours to 100%
Charge Time
STEP Communications warrants this product to be free from defects in
manufacturing for 1 year from the date of original retail purchase when used in
strict accordance with the guidelines set forth in the User Manual. This
warranty extends only to the original retail purchaser, and does not apply if the
product has been damaged or fails to function properly as a result of misuse,
abuse, alteration, unauthorized service or parts, improper cleaning or
maintenance, or failure to follow the installation, operation or maintenance
instructions.
ANY IMPLIED WARRANTIES, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
STEP’s sole obligation under this warranty or any implied warranty, and the
purchaser’s sole remedy, is limited to the repair or replacement, at STEP’s
option, of the product or any defective part. IN NO EVENT SHALL STEP,
ITS AFFILIATES, SUPPLIERS, SUBSIDIARIES, RELATED ENTITIES
OR THEIR RESPECTIVE OFFICERS, DIRECTORS, OR EMPLOYEES,
BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
EXEMPLARY, OR SPECIAL DAMAGES.
The duration, terms and conditions of this warranty are valid worldwide,
except where different limitations, restrictions or conditions may be required
by local law.
|
