BlackBerry 7130e
Version 4.1
User Guide
warranty or guarantee whatsoever in relation to the Third Party Information and RIM assumes no liability whatsoever in relation to the Third
Party Information even if RIM has been advised of the possibility of such damages or can anticipate such damages.
Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations:
4,901,307, 5,490,165, 5,056,109, 5,504,773, 5,101,501, 5,506,865, 5,109,390, 5,511,073, 5,228,054, 5,535,239, 5,267,261,
5,544,196, 5,267,262, 5,568,483, 5,337,338, 5,600,754, 5,414,796, 5,657,420, 5,416,797, 5,659,569, 5,710,784, 5,778,338
Research In Motion Limited
295 Phillip Street
Waterloo, ON N2L 3W8
Canada
Published in Canada
1
2
3
4
5
6
7
8
9
Enterprise activation............................................................................................................................................... 7
Phone........................................................................................................................................................................... 9
Email messages .....................................................................................................................................................17
PIN messages..........................................................................................................................................................23
SMS messages.........................................................................................................................................................25
MMS messages .......................................................................................................................................................27
Search........................................................................................................................................................................31
Attachments............................................................................................................................................................33
Synchronizing data................................................................................................................................................37
10 Backing up and restoring device data..............................................................................................................39
11 Typing........................................................................................................................................................................41
12 Browser.....................................................................................................................................................................45
13 Downloading...........................................................................................................................................................49
14 Contacts....................................................................................................................................................................51
15 Calendar ...................................................................................................................................................................55
16 Tasks..........................................................................................................................................................................59
17 Memos.......................................................................................................................................................................61
18 Alarm.........................................................................................................................................................................63
19 Calculator.................................................................................................................................................................65
20 Bluetooth..................................................................................................................................................................67
21 Date and time.........................................................................................................................................................69
22 Profiles ......................................................................................................................................................................71
23 Screen display .........................................................................................................................................................75
24 Language..................................................................................................................................................................77
25 Power and battery..................................................................................................................................................79
26 Network coverage..................................................................................................................................................81
27 Security .....................................................................................................................................................................83
28 Third-party program control................................................................................................................................89
29 BrickBreaker ............................................................................................................................................................93
30 Service books...........................................................................................................................................................95
31 Frequently asked questions.................................................................................................................................97
32 General — frequently asked questions..............................................................................................................99
33 Phone — frequently asked questions..............................................................................................................101
34 Email and PIN messages — frequently asked questions ..........................................................................103
35 SMS messages — frequently asked questions..............................................................................................109
36 MMS messages — frequently asked questions ............................................................................................111
37 Attachments — frequently asked questions.................................................................................................113
38 Synchronization — frequently asked questions...........................................................................................117
39 Browser — frequently asked questions ..........................................................................................................121
40 Contacts — frequently asked questions.........................................................................................................125
41 Calendar — frequently asked questions ........................................................................................................127
42 Bluetooth — frequently asked questions.......................................................................................................129
43 Security — frequently asked questions ..........................................................................................................131
44 Shortcuts ...............................................................................................................................................................133
45 Legal notice ..........................................................................................................................................................135
Index.......................................................................................................................................................................137
1
About enterprise activation
2. In the device options, click Advanced Options.
3. Click Enterprise Activation.
Activate the device over the wireless network
Verify activation status
4. Type your corporate email address and the
password provided to you by your system
administrator.
About enterprise activation
5. Click the trackwheel.
Use the enterprise activation feature to integrate your
BlackBerry® device with your corporate Microsoft®
Outlook®, IBM® Lotus Notes®, or Novell®
Groupwise® email account if you have access to a
BlackBerry Enterprise Server™ version 4.0 or later. You
can also use the enterprise activation feature to load
or restore device data that is saved as part of an
automatic wireless backup, personal information
management synchronization, or wireless email
reconciliation.
6. Click Activate.
Note:
Limit the use of your BlackBerry® device until
enterprise activation is complete.
Related topic
Why are some messages already on my device? (See
page 104.)
If you have access to a BlackBerry Enterprise Server
version 4.0 or later, and Enterprise Activation does not
appear in the device options, verify with your service
provider that your device is provisioned for enterprise
activation. If your device is provisioned for the service
and the option does not appear, contact your system
administrator.
Verify activation status
If the BlackBerry® device has not yet been activated,
or you are upgrading your software, Enterprise
Activation might appear on the Home screen. Click
Enterprise Activation to check the activation status.
If Enterprise Activation does not appear on the Home
screen, in the device options, click Enterprise
Activation to check the activation status.
If you do not have access to a BlackBerry Enterprise
Server version 4.0 or later, see the printed
documentation that accompanied your device for
more information about integrating your device with
an email account.
Activate the device over the wireless
network
1. Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network.
User Guide
8
2
Find your phone number
Make phone calls
Reset call timers
Phone shortcuts
Make emergency calls
Phone — frequently asked questions
Turn on A-GPS support
Check voice mail
Find your phone number
In the phone, the My Number field displays your
phone number.
Make phone calls
On the Home screen, type a phone number. Press the
Answer calls
Send key. To end the call, press the End key.
Mute calls
Notes:
Adjust the phone volume
Dial using letters
Press the Send key on any screen to open the phone.
Related topics
Make three-way calls
Add pauses or waits (See page 53.)
Log calls
Can I use the phone when the device or keyboard is
locked? (See page 101.)
Forward calls
Make emergency calls
Set default country and area codes
Set corporate extension dialing
Set voice mail options
You should be able to make emergency calls even if
your BlackBerry® device is locked. If your device is not
connected to the wireless network, it should connect
automatically when the emergency call is initiated.
To make an emergency call, perform one of the
following actions:
Set the TTY option
Set the default call volume
Set voice privacy change alert
•
Unlocked keyboard or device: In the phone, type
the emergency number. Press the Send key.
User Guide
•
Locked keyboard or device: Click the trackwheel.
Click Emergency Call. Click Yes.
Related topics
About A-GPS support (See page 10.)
About Emergency Callback Mode (See page 11.)
Note:
Emergency calls can only be made to official
America.
About location-based services
The privacy setting for location-based services controls
whether programs on your BlackBerry® device can use
the GPS position of your device. For example, a
program could use the GPS position of your device to
give you driving directions. Contact your service
provider for the availability of location-based services.
Related topics
Turn on A-GPS support (See page 10.)
About Emergency Callback Mode (See page 11.)
About A-GPS support
Depending on your service provider, your BlackBerry®
device might be enabled with Assisted Global
Positioning System (A-GPS) support.
Change the privacy setting for
location-based services
To set the privacy level for location-based services on
your BlackBerry® device, in the device options, click
Advanced Options. Click Location Based Services.
Perform one of the following actions:
If your device is enabled with A-GPS support, an
emergency operator should be able to estimate your
location when you make an emergency call or when
your device is in Emergency Callback Mode.
•
•
•
To be prompted each time a location-based
service program wants to use the GPS position of
your device, set the Privacy Setting field to By
Permission. Click the trackwheel. Click Save.
Turn on A-GPS support
In the device options, click Advanced Options.
Perform one of the following actions:
To prevent location-based service programs from
using the GPS position of your device, set the
Privacy Setting field to Restricted. Click the
trackwheel. Click Save.
•
To turn on and off A-GPS support for emergencies,
click Location Based Services. Set the GPS
Services field to 911 Only/Location Off or
Location Off/Location On (depending on your
service provider).
To allow location-based service programs to use
the GPS position of your device, set the Privacy
Setting field to Unrestricted. Click the trackwheel.
Click Save.
•
To enable an operator to estimate your location at
other times (subject to A-GPS limitations), set the
GPS Services field to Location On.
Note:
If you set the privacy level for location-based services
on your device to By Permission or Restricted, and you
make an emergency call from your device, an
emergency operator should still be able to estimate
your approximate location (subject to A-GPS
limitations).
Warning:
In an emergency, always provide detailed information
about your location to the emergency operator.
Because of certain limitations in A-GPS technology
and emergency infrastructure, the emergency operator
might not be able to estimate your location using only
A-GPS information.
10
2: Phone
Related topics
Note:
To exit Emergency Callback Mode manually, click the
trackwheel. Click Exit Emergency Callback Mode.
About location-based services (See page 10.)
Acquire the GPS position of your device (See page 11.)
Make calls using speed dial
In the phone, hold the key that is assigned to the
contact or phone number.
Acquire the GPS position of your
device
Your BlackBerry® Global Positioning System (GPS)
location is determined using information from GPS
satellites, and it is expressed as a longitude and
latitude. To acquire your BlackBerry satellite position,
in the device options, click Advanced Options. Click
Location Based Services. Click the trackwheel. Click
Refresh GPS.
Note:
the Home screen or in the messages list.
Related topics
Assign speed dial numbers to keys (See page 12.)
Note:
Change speed dial numbers (See page 13.)
by clicking Refresh GPS, try again when your
sky.
Check voice mail
Voicemail.
Related topics
About A-GPS support (See page 10.)
Answer calls
To answer a call, click Answer. If you do not want to
About location-based services (See page 10.)
answer a call, click Ignore.
Change the privacy setting for location-based services
(See page 10.)
If you are already connected to a call and you receive
another call, click Answer - Hold Current.
To end a call, press the End key.
About Emergency Callback Mode
When you end an emergency call, the BlackBerry®
device should enter Emergency Callback Mode. This
mode enables the operator to call you back or
determine your approximate location. Depending on
your service provider, Emergency Callback Mode is
active for five minutes or is canceled when you make a
non-emergency call.
Note:
another call, press the Send key to place the current
Related topics
In Emergency Callback Mode, you cannot send and
receive messages or browse web pages.
Can I use the phone when the device or keyboard is
locked? (See page 101.)
Your device exits Emergency Callback Mode at any
time if you make a non-emergency call.
Use Bluetooth wireless technology during a call (See
page 68.)
11
User Guide
Alternate between calls
During a call, if you receive an incoming call, click
Answer - Hold Current. Click the trackwheel. Click
Flash to alternate between calls.
Use other programs during calls
To use other device programs during a call, click the
trackwheel. Click Home Screen.
Dial using letters
Notes:
To type letters when dialing a phone number, use the
multi-tap input method. Hold the Alt key. To type the
first letter on the key, press the key once. To type the
second letter on the key, press the key twice.
You must subscribe to a call waiting service to
alternate between calls.
You can also press the Enter key to alternate between
calls.
Note:
When you type a letter in a phone number, your
BlackBerry® device dials the number that is associated
with the letter on a conventional phone keypad.
Mute calls
To mute a call, click the trackwheel. Click Mute. To
turn mute off, click the trackwheel. Click Turn Mute
Off.
Make three-way calls
1. During a call, click the trackwheel.
2. Click 3-Way Call.
Adjust the phone volume
To increase the volume, during a call, roll the
trackwheel up. To decrease the volume, roll the
trackwheel down.
3. Type a phone number or click a contact.
4. Press the Enter key twice.
5. During the second call, click the trackwheel.
6. Click Flash.
Turn on and off speakerphone
To turn on speakerphone, during a call, click the
trackwheel. Click Activate Speakerphone.
Notes:
To turn off speakerphone, during a call, click the
The Active Call screen shows that you are only
connected to the second contact even though you are
connected to both calls.
trackwheel. Click Activate Handset.
Warning:
To disconnect from the second contact, click the
trackwheel. Click Flash.
Do not hold the BlackBerry® device near your ear
for more information about using speakerphone
safely.
Related topic
Can I make three-way calls? (See page 101.)
Related topic
Assign speed dial numbers to keys
1. In the phone, click the trackwheel.
2. Click View Speed Dial List.
Use Bluetooth wireless technology during a call (See
page 68.)
3. Click an unassigned key.
12
2: Phone
4. Click New Speed Dial.
Related topics
About call logs
5. Click a contact.
6. Click Add Speed Dial To <contact name>.
Manage call logs (See page 13.)
Can I set the phone to display frequently called
numbers? (See page 102.)
Note:
To assign a contact or phone number from the phone
to a speed dial key, select a contact or phone number.
Hold an unassigned key. Click OK.
How do I change how long messages and phone call
logs remain in the messages list? (See page 106.)
Related topic
Manage call logs
In the phone, or in the messages list, open a call log.
Click the trackwheel. Perform one of the following
actions:
Change speed dial numbers (See page 13.)
Change speed dial numbers
In the phone, click the trackwheel. Click View Speed
Dial List. Click a contact or phone number. Perform
one of the following actions:
•
•
•
•
To add notes to the call log, click Add Notes.
To edit call log notes, click Edit Notes.
To forward call log notes, click Forward.
•
•
•
To change the contact that is assigned to a speed
dial key, click Edit. Click a new contact. Click Add
Speed Dial To <contact name>.
To delete call log notes, in the open call log, click
the trackwheel. Click Edit Notes. Click the
trackwheel. Click Clear Field.
To assign the contact to a different speed dial key,
click Move. Roll the trackwheel to move the
contact. Click the trackwheel.
Forward calls
1. In the phone options, click Call Forwarding.
To delete a contact from the speed dial list, click
Delete.
2. Click the type of calls to forward.
3. Click Do Not Forward or the current forwarding
phone number.
About call logs
4. Click Change Number.
5. Click a forwarding phone number.
6. Click the trackwheel.
7. Click Save.
Call logs appear when you open the phone. Missed
call logs also appear in the messages list.
Log calls
To set whether call logs appear in the messages list, in
the phone options, click Call Logging. Select the call
log type that you want to appear in the messages list.
Press the Space key.
Note:
Before you enable call forwarding, verify that your
service provider supports this feature, and that you
have call forwarding phone numbers added. Contact
your service provider for more information.
If you do not want any call logs to appear in the
messages list, select None. Press the Space key.
13
User Guide
Related topics
In the phone options, click Enhanced Audio. Set the
Automatic Volume Control field. Click the
trackwheel. Click Save.
Add call forwarding phone numbers (See page 14.)
Delete call forwarding phone numbers (See page 14.)
Can I use call forwarding? (See page 102.)
Related topic
How do I edit the phone number to which my calls are
forwarded? (See page 102.)
About automatic volume control (See page 14.)
Add call forwarding phone numbers
1. On the Call Forwarding screen, click a type of calls
About smart dialing
You can specify default country and area codes so that
any numbers that are specified as links, or any
numbers in your address book that do not contain
these codes, are dialed correctly.
to forward.
2. Click New Number.
3. Type a phone number.
6. Click Close.
If you call a corporation frequently, you can also set
your smart-dialing options so that you do not have to
type the main number for the corporation. To call a
contact in the corporation, you only need to press the
X key and type the extension number.
Related topic
How do I edit the phone number to which my calls are
forwarded? (See page 102.)
Set default country and area codes
1. In the phone options, click Smart Dialing.
2. Set the Country Code and Area Code fields.
Delete call forwarding phone
3. In the National Number Length field, set the
default length for phone numbers in your country.
forwarding number. Click Edit Numbers. Click a
phone number. Click Delete.
4. Click the trackwheel.
5. Click Save.
Note:
Related topic
When you calculate the default length for phone
numbers, include your area code and local number,
but do not include your country code or the National
Direct Dialing prefix.
How do I edit the phone number to which my calls are
forwarded? (See page 102.)
About automatic volume control
Automatic volume control is designed to adjust the
volume on your BlackBerry® device when you are
using the phone in a noisy environment.
Warning:
If you roam to another country and you change your
smart-dialing options, phone numbers for contacts in
your address book might not be dialed correctly.
14
2: Phone
Related topic
When TTY is enabled, an indicator appears in the
device status section of the screen.
About smart dialing (See page 14.)
Note:
Set corporate extension dialing
1. In the phone options, click Smart Dialing.
The TTY option is only available on some BlackBerry®
devices. Contact your service provider for more
information.
2. In the Number field, type the main phone number
for a corporation.
3. Set how long the BlackBerry® device waits before
dialing an extension.
4. In the Extension Length field, set the default
Related topics
5. Click the trackwheel.
About TTY (See page 15.)
6. Click Save.
Can I use a TTY device with my device? (See page
102.)
Related topic
About smart dialing (See page 14.)
About default call volume
You can specify a default volume level that is used for
all calls, even if you adjusted the volume during a
previous call.
Set voice mail options
In the phone options, click Voicemail. Type a voice
mail access number and any additional numbers, such
as a password or extension. Click the trackwheel. Click
Save.
In the phone options, click General Options. Set the
Default Call Volume field. Click the trackwheel. Click
Save.
Notes:
If your BlackBerry® device is provisioned for voice
mail, the voice mail access number might already
appear on the screen. Contact your service provider for
more information about voice mail for your device.
Related topic
About default call volume (See page 15.)
If your device is not provisioned for voice mail, you can
type the access number for a different voice mail
system.
About voice privacy
Depending on your service provider, your BlackBerry®
device might support a voice privacy service.
Depending on the status of the wireless network, the
voice privacy status might change during a phone call.
If voice privacy is active, a small “P” icon appears on
the Active Call screen and in the device status section
of the screen.
About TTY
You can use text telephone (TTY) to make calls to, and
receive calls from, other TTY devices. If you connect
your BlackBerry® device to a TTY device, calls that you
receive on your device are converted to text.
15
User Guide
You can set whether you receive notification when
there is a change in voice privacy service during a call.
To change the volume during a call, roll the
trackwheel.
To move to the top of the call log list in the phone,
press the Space key.
Set voice privacy change alert
To insert a wait when typing a phone number, press
the exclamation point (!) key.
In the phone options, click Sounds. Set the Privacy
Alert field. Click the trackwheel. Click Save.
To insert a pause when typing a phone number, press
the comma (,) key.
Related topic
To insert a plus sign (+) when typing a phone number,
hold 0.
About voice privacy (See page 15.)
Reset call timers
1. In the phone, click the trackwheel.
2. Click Status.
3. Click Last Call or Total Calls.
4. Click Clear Timer.
5. Click the trackwheel.
6. Click Save.
Phone shortcuts
To open the phone, press the Send key.
To end a call, press the End key.
To call a selected contact or phone number, press the
Send key.
To call a speed dial number, hold the assigned key.
To add an extension to a phone number, press the X
key. Type the extension number.
To call your voice mail access number, hold 1.
To type a letter in a number field, hold the Alt key. To
type the first letter on a key, press the letter key once.
To type the second letter on a key, press the letter key
twice.
To turn mute on and off during a call, press the
exclamation point (!) key.
To turn speakerphone on and off during a call, press
the period (.) key.
16
3
Note:
If your BlackBerry® device is integrated with more
than one email account, you might be able to open
messages from the message list for a specific email
account.
Send email messages
Save draft messages
Send email messages
1. In the messages list, click the trackwheel.
2. Click Compose Email.
Resend pending messages
3. In the To field, type an email address or a contact
name.
View filed messages
4. Click the trackwheel.
5. Type a message.
6. Click the trackwheel.
7. Click Send.
Search the messages list
Add an auto signature
Notes:
If a list of names appears as you type a contact name,
click a name to add that contact to your message.
Set an out-of-office reply
Create filters
If your BlackBerry® device is integrated with more
than one email account, you can select an account to
send the message from. At the top of the message, in
able to send messages from the message list for a
specific email account.
Set folder redirection
Messages shortcuts
Email and PIN messages — frequently asked questions
Open messages
Related topic
An unopened message appears in the messages list
with a closed envelope icon. After you open the
message, the closed envelope changes to an open
envelope.
Search for contacts in your company address book (See
page 53.)
User Guide
Save draft messages
Resend pending messages
To save a draft of a message, click the trackwheel.
Messages that appear in the messages list with a clock
icon are pending and should be resent automatically.
To manually resend the message, in the open
message, click the trackwheel. Click Resend. If your
message cannot be sent after a period of time, you
receive a message indicating that the message was
not sent successfully.
Click Save Draft.
Add multiple contacts to a message
To add multiple contacts to a message, in a blank To
or CC field, type an email address, PIN number, or a
contact name.
To add a blind carbon copy (BCC) recipient, click the
trackwheel. Click Add Bcc.
Manage messages
Open a message. Click the trackwheel. Click one of the
following menu items:
To attach a contact to a message, click the trackwheel.
Click Attach Address.
•
•
•
•
•
•
Save
Reply
Set the importance level
1. When composing a message, click the trackwheel.
2. Click Options.
Forward
Forward As
Reply To All
Delete
3. Set the Importance field to High or Low.
4. Click the trackwheel.
5. Click Save.
Notes:
To remove the original message from a reply, click the
trackwheel. Click Delete Original Text.
Resend sent messages
To change the text in a sent message and resend it, in
the open message, click the trackwheel. Click Edit.
Change the text. Send the message.
If your BlackBerry® device is integrated with more
than one email account, you might be able to manage
messages from the message list for a specific email
account.
To change the recipient of a sent message and resend
it, in the open message, click the trackwheel. Click
Edit. Click a contact. Click Change Address. Click a
new contact. Send the message.
File messages
To file a message, click the message. Click File. Click a
To resend your message to the same contact, in the
folder. Click File.
open message, click the trackwheel. Click Resend.
Notes:
To expand a folder, click a folder with a plus sign (+)
beside it. Click Expand.
To collapse a folder, click a folder with a minus sign (-)
beside it. Click Collapse.
18
3: Email messages
Related topics
Save a copy of messages sent from
the device
Can I file messages? (See page 105.)
In the messages options, click Email Settings. Set the
Save Copy In Sent Folder field to Yes. Click the
trackwheel. Click Save.
View filed messages (See page 19.)
View filed messages
To display all filed messages in the messages list, in
the messages options, click General Options. Set the
Hide Filed Messages field to No. Click the trackwheel.
Click Save.
Note:
Copies of sent messages are stored in the Sent Items
folder in your desktop email program.
To view messages that are stored in a specific folder, in
the messages list, click the trackwheel. Click View
Folder. Click a folder. Click Select Folder.
About auto signatures
Your auto signature is added to your email messages
after you send them. The auto signature does not
appear on your BlackBerry® device when you compose
the message.
Delete multiple messages at one
time
To delete multiple messages, hold the Shift key and
select messages. Press the Backspace/Delete key.
To add an auto signature from your device, your
device must be integrated with an account that uses
BlackBerry Enterprise Server™ version 4.0 or later.
To delete messages that you sent or received prior to
or on a specific date, click a date field. Click Delete
Prior.
Add an auto signature
1. In the messages options, click Email Settings.
2. Set the Use Auto Signature field to Yes.
3. Type an auto signature.
Note:
When your email messages are reconciled between
program, any messages that you have deleted from
your device using the Delete Prior option are not
deleted from your desktop email program.
4. Click the trackwheel.
5. Click Save.
Note:
Related topic
Desktop Software. If you use the BlackBerry Internet
Service™, log in to your account using a desktop
browser to add an auto signature.
Reconcile deleted messages (See page 37.)
Mark messages as opened or
unopened
Related topic
About auto signatures (See page 19.)
To change the status of a message, click a message.
Click Mark Opened or Mark Unopened.
To change the status of multiple unread messages to
read, click a date field. Click Mark Prior Opened.
19
User Guide
If the message does not meet any filter criteria and
should not be forwarded, set the If no filters apply,
send email to handheld field to No.
About out-of-office replies
The out-of-office reply should be sent automatically to
a contact the first time that contact sends you an
email message.
Filters are applied to messages based on the order in
which they appear. If you create multiple filters that
could apply to the same message, you must decide
which one should be applied first by placing that filter
higher in the list.
To set an out-of-office reply on your BlackBerry®
device, your device must be integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later.
To create filters on your device, your device must be
integrated with an account that uses BlackBerry
Enterprise Server™ version 4.0 or later.
Set an out-of-office reply
1. In the messages options, click Email Settings.
2. Set the Use Out Of Office Reply field to Yes.
3. Type a reply.
Create filters
1. In the messages options, click Email Filters.
2. Click the trackwheel.
3. Click New.
4. If you use an IBM® Lotus Notes® desktop email
program, in the Until field, set the date on which
the out-of-office reply should be turned off.
4. Set the filter information.
5. Click the trackwheel.
6. Click Save.
5. Click the trackwheel.
6. Click Save.
Note:
Notes:
email program. If you use the BlackBerry Internet
Service™, log in to your account using a desktop
browser to set an out-of-office reply.
To add a contact to the From or Sent to fields, click
the trackwheel. Click Select Name. Click a name. Click
Continue.
To make the filter detect messages from multiple
contacts, use semicolons to separate contacts in the
From or Sent to fields.
Related topic
About out-of-office replies (See page 20.)
create filters. If you use the BlackBerry Internet
About filters
You can create filters to specify which email messages
are forwarded to your BlackBerry® device and which
messages remain in your desktop email program. To
forward messages to your device, when creating a
filter, select Forward with Level 1 Notification (sends
messages with higher priority) or Forward header
only (sends messages with only the To, Sent, and
From fields).
Related topics
About filters (See page 20.)
Manage filters (See page 21.)
Create filters quickly (See page 21.)
20
3: Email messages
6. Click Save.
Manage filters
Click a filter. Perform one of the following actions:
Notes:
•
To turn on the filter, select a filter. Press the Space
Make sure that you select the Inbox check box. If you
do not select the Inbox check box, messages are not
forwarded from this folder.
key.
•
•
To view and edit a filter, click a filter. Click Edit.
To select all your folders for redirection, including your
Sent Items folder, select the Select All check box.
Messages that are sent from your desktop email
program also appear on your BlackBerry® device.
To move the filter higher or lower in the list, click
the filter. Click Move. Roll the trackwheel to move
the filter. Click the trackwheel.
•
To delete the filter, click a filter. Click Delete.
You can also use the BlackBerry Desktop Software to
BlackBerry Internet Service™, log in to your account
settings.
Create filters quickly
In the messages list, click a message on which to base
your filter. Perform one of the following actions:
•
To create a filter based on the sender, click Filter
Sender. Type a title. Click the trackwheel. Click
Save.
Related topics
How do I stop messages that are sent from my desktop
email program from appearing on my device? (See
page 107.)
•
To create a filter based on the subject, click Filter
Subject. Type a title. Click the trackwheel. Click
Save.
How do I make changes to the folders on my device?
(See page 107.)
About folder redirection
If rules within your desktop email program direct new
messages into different folders, you must specify
which folders should forward messages to your
BlackBerry® device.
Messages shortcuts
To open a selected message, press the Enter key.
To compose a message from the messages list, press
the comma (,) key.
To set folder redirection on your device, your device
must be integrated with an account that uses
BlackBerry Enterprise Server™ version 4.0 or later.
To reply to a message, press the exclamation point (!)
key.
To forward a message, press the period (.) key.
To reply to all, press the question mark (?) key.
To move down a page, press 9.
Set folder redirection
1. In the messages options, click Email Settings.
2. Click the trackwheel.
To move up a page, press 3.
3. Click Folder Redirection.
To view sent messages or call logs for outgoing phone
calls, in the messages list, press the Alt key + the
period (.) key.
4. Select the check boxes beside the folders from
which messages should be forwarded.
To view received messages or call logs for incoming
phone calls, in the messages list, press the Alt key + 3.
5. Click the trackwheel.
21
User Guide
To view voice mail messages, in the messages list,
press the Alt key + 7.
To move to the last cursor position in a received
message, press 5.
22
4
Note:
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later, your PIN appears on the Enterprise
Activation screen.
Find your PIN
Save draft messages
Send PIN messages
1. In the messages list, click the trackwheel.
2. Click Compose PIN.
Add multiple contacts to a message
4. Type a message.
Mark messages as opened or unopened
Search the messages list
Messages shortcuts
5. Click the trackwheel.
6. Click Send.
Note:
Email and PIN messages — frequently asked questions
If a list of names appears as you type a contact name,
click a name to add that contact to your message.
About PIN messages
A personal identification number (PIN) uniquely
identifies each BlackBerry® device on the network. If
you know the PIN of another BlackBerry device user,
you can send a PIN message to that person. PIN
messages are not routed through an existing email
account.
Manage PIN messages
Open a message. Click the trackwheel. Click one of the
following menu items:
•
•
•
•
•
•
Save
Reply
When your PIN message is delivered to the recipient,
in the messages list, a D appears with a check mark
beside the PIN message.
Forward
Forward As
Reply To All
Delete
Find your PIN
In the device options, click Status.
User Guide
Note:
To remove the original message from a reply, click the
trackwheel. Click Delete Original Text.
24
5
Find your SMS number
In the phone, the My Number field displays your
Find your SMS number
phone number. If your BlackBerry® device is enabled
for SMS, this number is also your SMS number.
Type an SMS number
Open SMS messages
Send SMS messages
Type an SMS number
Add contacts to SMS messages
Save draft messages
Contact your service provider for more information
about SMS number format. Your service provider
might require that all SMS numbers include the area
code and other prefixes.
Resend sent SMS messages
Mark messages as opened or unopened
Search the messages list
Messages shortcuts
Note:
In the phone options, set your smart-dialing options to
avoid typing the country code and area code.
Related topic
About smart dialing (See page 14.)
SMS messages — frequently asked questions
Open SMS messages
About SMS messages
An unopened SMS message appears in the messages
list with a closed italic envelope icon. After you open
the message, the closed italic envelope changes to an
open italic envelope.
With an SMS-compatible phone number, you can send
and receive short message service (SMS) messages. An
SMS-compatible number is a phone number that your
service provider enables for SMS.
You can send SMS messages to contacts who have
SMS-compatible phone numbers.
Send SMS messages
1. In the messages list, click the trackwheel.
2. Click Compose SMS.
Note:
If your BlackBerry® device supports sending SMS
messages to email addresses, you can also send SMS
messages to contacts who have email addresses.
3. Click [Use Once].
4. Click SMS.
5. Click Phone.
6. Type an SMS-compatible phone number.
User Guide
7. Click the trackwheel.
8. Click Continue.
9. Type a message.
10. Click the trackwheel.
11. C l i c k Send.
•
Delete
Note:
To remove previous SMS messages from a reply
message, click the trackwheel. Click Remove History.
Resend sent SMS messages
Notes:
To resend an SMS message to the same contact, in the
If you have added contacts to the address book, you
can select a contact from the list after you click
Compose SMS.
message, click the trackwheel. Click Resend.
Note:
If your BlackBerry® device supports sending SMS
messages to email addresses, you can select the
destination address as an email address after you click
[Use Once].
If you send an SMS message to multiple contacts and
the message does not reach one or more contacts,
click Resend to resend the message to the contacts
who did not receive it initially.
To send an SMS message quickly from the phone, type
an SMS-compatible phone number. Click the
trackwheel. Click SMS<XXXXXXX>.
Related topic
Why can’t I send SMS messages? (See page 109.)
Add contacts to SMS messages
When composing an SMS message, click the
Note:
You can send an SMS message to up to ten recipients.
Related topic
Type an SMS number (See page 25.)
Manage SMS messages
Open a message. Click the trackwheel. Click one of the
following menu items:
•
•
•
•
Save
Reply
Forward
Forward As
26
6
Find your MMS number
Open MMS messages
Send MMS messages
You can only send non recurring appointments in
MMS messages. If you attach a meeting, the attendees
are removed.
Find your MMS number
In the phone, the My Number field displays your
phone number. If your BlackBerry® device is enabled
for MMS, this number is also your MMS number.
Send MMS messages from the browser, pictures list, or
calendar
Save draft messages
Open MMS messages
An unopened MMS message appears in the messages
list with a closed italic envelope icon. After you open
the message, the closed italic envelope changes to an
open italic envelope.
Set delivery and read notification
Manage MMS message attachments
Messages shortcuts
If MMS content does not appear when you open the
message, click the trackwheel. Click Retrieve.
Manage MMS messages
About MMS messages
Send MMS messages
1. In the messages list, click the trackwheel.
2. Click Compose MMS.
3. Click [Use Once].
With an MMS-compatible number, you can send and
receive multimedia message service (MMS) messages.
An MMS-compatible number is a phone number that
your service provider enables for MMS.
If your service provider supports MMS, you can send
MMS messages that contain .jpg, .gif, .wbmp, .png,
.smil, .midi, .mp3, vcf (vCard®), or .vcs (vCalendar®)
content and receive MMS messages that contain .jpg,
.gif, .wbmp, .png, .midi, .mp3, .txt, .vcf, .vcs, or .smil
content.
4. Click MMS.
5. Select a send method.
6. Type an MMS-compatible phone number or an
email address.
7. Click the trackwheel.
8. Click Continue.
You can add one or more images that are not
copyright protected to an MMS message, but the
message cannot exceed 300 KB.
9. Type a message.
10. Click the trackwheel.
User Guide
11. C l i c k Attach Address, Attach Appointment,
3. Set the Confirm Delivery and Confirm Read
Attach Picture, or Attach Audio.
fields.
12. Click a contact, appointment, image, or audio file.
13. Click Continue.
5. Click Save.
14. Click the trackwheel.
Related topic
15. Click Send.
Can I configure notification for all MMS messages?
(See page 111.)
Notes:
If you have added contacts to the address book, you
can select a contact from the list after you click
Compose MMS.
Manage MMS message attachments
In an open message, click an image or a vCalendar or
vCard attachment. Click View Image, View
Appointment, or View Address. Click the trackwheel.
Click one of the following menu items:
To send an MMS message quickly from the phone,
type an MMS-compatible phone number. Click the
trackwheel. Click MMS<XXXXXXX>.
MMS message. In a Slide Duration field, press the
Space key.
•
•
Add To Calendar
Add Contact
Notes:
Related topic
Images are saved in the pictures list.
Can I send and receive MMS messages? (See page
111. )
To play an audio file, click Play. Roll the trackwheel to
increase or decrease the volume. To stop playing the
file, click the trackwheel.
Send MMS messages from the
browser, pictures list, or calendar
Manage MMS messages
In an open MMS message, click the trackwheel. Click
one of the following menu items:
1. In the browser or pictures list, click an image. In
the calendar, click an appointment.
2. Click Send As MMS.
3. Add a contact.
•
•
•
•
•
Save
Reply
4. Type a message.
5. Click the trackwheel.
6. Click Send.
Forward
Reply To All
Delete
Set delivery and read notification
1. When composing an MMS message, click the
Notes:
When you reply to an MMS message, the previous
message is not included.
trackwheel.
2. Click Options.
28
6: MMS messages
You cannot edit the content of an MMS message that
you forward. You can only forward an MMS message if
the content is not copyright protected.
Additional options might also be available if the
message contains .smil content.
29
User Guide
30
7
About search
Notes:
To save a search after setting the search criteria, click
the trackwheel. Click Save. Add a title and a shortcut
key for your search. Click the trackwheel. Click Save.
Search the messages list
Search for messages from a specific contact
Search for messages with a specific subject
Search for PIM items
than one email account, and you want to search for
field.
Related topics
Search shortcuts
Recall searches (See page 31.)
About search
Search for messages from a specific contact (See page
32.)
In the messages list, you can search using criteria that
you set and you can save the search criteria for future
use. You can also search for contacts or search for all
messages that contain the same subject.
Search for messages with a specific subject (See page
32.)
You can use the search program to search messages
and personal information management (PIM) items,
such as tasks, memos, contacts, and calendar entries,
on your BlackBerry® device. You can also manage PIM
items from the search results list.
Search for PIM items (See page 32.)
Recall searches
To view your saved searches, in the messages list, click
the trackwheel. Click Search. Click the trackwheel.
Click Recall.
Search the messages list
1. In the messages list, click the trackwheel.
2. Click Search.
Manage saved searches
In the list of saved searches, click a search. Click one of
the following menu items:
3. Set the search criteria.
4. Click the trackwheel.
•
•
•
Select Search
Edit Search
5. Click Search.
Delete Search
User Guide
Note:
Search for PIM items
1. In the search program, in the Text field, type text
To view the criteria of your last search quickly, in the
list of searches, click the trackwheel. Click Last.
to search for.
2. In the Name field, type a contact name to search
Related topic
for.
Recall searches
3. Select one or more programs.
4. Click the trackwheel.
5. Click Search.
Search for messages from a specific
contact
To search for all messages received from a specific
sender, in the messages list, click a message. Click
Search Sender.
Notes:
If you type more than one word in the Text or Name
field, all the words must appear for the search to be
successful.
To search for all messages sent to a specific recipient,
in the messages list, click a message. Click Search
Recipient.
File attachments are not searched when you search
PIM items.
Note:
Related topic
If your BlackBerry® device is integrated with more
than one email account, you might be able to start a
search from the message list for a specific email
account. The device searches only for messages in that
list. To search all email accounts for messages from a
specific contact, search from the main messages list.
How do I search for text in a file attachment? (See
page 114.)
Search shortcuts
To search for text in a specific program, in the
program, click the trackwheel. Click Find. Type the
text.
Search for messages with a specific
subject
To search for a contact, in a list of contacts, type the
contact name or initials separated by a space.
To search for all messages with the same subject, click
a message. Click Search Subject.
To stop a search that is in progress, press the Escape
button.
Note:
If your BlackBerry® device is integrated with more
than one email account, you might be able to start a
search from the message list for a specific email
account. The device searches only for messages in that
list. To search all email accounts for messages with a
specific subject, search from the main messages list.
32
8
Attachments
About attachments
Open a file attachment
1. In a message, click the trackwheel.
2. Click Open Attachment.
3. Click the attachment.
Open a file attachment
Open embedded content
View tables in attachments
View attachment information
Navigate image attachments
View presentations
4. Click Expand.
5. Perform one of the following actions:
•
To open a table of contents for the file
attachment, click Table of Contents.
•
To open the file attachment, click Full
Navigate presentation attachments
Manage vCard address book attachments
Attachments shortcuts
Content.
6. Click Retrieve.
Note:
Attachments — frequently asked questions
To reopen an image attachment quickly, in the
message, click the attachment image. Click Open
Attachment.
About attachments
You can view several types of file attachments on your
BlackBerry® device, including .zip, .htm, .html, .doc,
.dot, .ppt, .pdf, .wpd, .txt, .vcf, and .xls files. You can
also view .bmp, .gif, .jpg, .png, and .tif image
attachments.
Open embedded content
In an attachment, click a content link. Click Retrieve.
To return to the attachment, press the Escape button.
Examples of embedded content include tables,
images, footnotes, text boxes, or comments.
If your device is integrated with an account that uses
BlackBerry Enterprise Server™ version 4.1 or later, you
can view .wmf files on your device.
View tables in attachments
To preview a table that is embedded in a document,
In the messages list, a paper clip icon appears beside
messages with attachments.
click the table link. Click Retrieve.
Related topic
To view the full table in the table preview, click the
Can I view file attachments on my device? (See page
113 . )
Table Link link. Click Retrieve.
User Guide
To zoom into or out of an image, click the trackwheel.
Click Zoom In or Zoom Out.
View attachment information
To view the size, author, publication date, and other
information about the attachment, open the
attachment. Click the file name. Perform one of the
following actions:
To zoom to the original image size, click the
trackwheel. Click Zoom 1:1.
To turn an image 90 degrees in a clockwise direction,
click the trackwheel. Click Rotate.
•
If you have opened the complete file attachment,
click View Info.
To view an image in more detail after zooming in, click
the trackwheel. Click Enhance.
•
If you have not opened the complete file
To view an image at a higher resolution, click the
attachment, click Retrieve Info.
trackwheel. Click Full Image.
To view the previous page in a multiple-page image,
click the trackwheel. Click Prev Page.
Navigate spreadsheet attachments
To scroll horizontally in a spreadsheet, hold the Alt key
To view the next page in a multiple-page image, click
the trackwheel. Click Next Page. If the next page has
not yet been retrieved, in the attachment, click the
trackwheel. Click More.
and roll the trackwheel.
To move to a specific cell in a spreadsheet, click the
trackwheel. Click Go to Cell. Type the cell coordinates.
Click the trackwheel.
To switch to a different page in a multiple-page
image, click the trackwheel. Click Table of Contents.
In the table of contents, click a page. Perform one of
the following actions:
To display the contents of a cell in a spreadsheet, click
the trackwheel. Click View Cell.
To view the previous worksheet in a workbook, click
the trackwheel. Click Prev Sheet.
•
If the page has been retrieved (underlined with a
To view the next worksheet in a workbook, click the
trackwheel. Click Next Sheet. If the next worksheet
has not yet been retrieved, in the attachment, click the
trackwheel. Click More.
solid line), click View.
•
If the page has not been retrieved (underlined
with a dashed line), click Retrieve.
To view all the pages in the table of contents, click the
trackwheel. Click More.
To switch to a different worksheet in a workbook, click
the trackwheel. Click Table of Contents. In the table
of contents, click a worksheet. Perform one of the
following actions:
View presentations
To view a Microsoft® PowerPoint® presentation in its
original format, in the presentation, click the
trackwheel. Click View Slides.
•
If the worksheet has been retrieved (underlined
with a solid line), click View.
•
If the worksheet has not been retrieved
To view a PowerPoint presentation as a slide show, in
the presentation, click the trackwheel. Click Slide
Show.
(underlined with a dashed line), click Retrieve.
To view all the worksheets in the table of contents,
click the trackwheel. Click More.
To view only text in a PowerPoint presentation, in the
presentation, click the trackwheel. Click View Text.
Navigate image attachments
To view both text and slides, in the presentation, click
the trackwheel. Click View Both.
To pan horizontally across an image, hold the Alt key
and roll the trackwheel.
34
8: Attachments
Note:
Manage vCard address book
presentation, your BlackBerry® device must be
integrated with an account that uses BlackBerry
Enterprise Server™ version 4.1 or later.
attachments
To view a vCard® attachment, in an open message,
click the attachment. Click View Attachment.
To add the contact information to your address book,
in an address book attachment, click the trackwheel.
Click Add to Address Book.
Related topic
Navigate presentation attachments (See page 35.)
To update contact information, in an address book
attachment, click the trackwheel. Click Update
Address.
Navigate presentation attachments
To view the next slide in a presentation, click the
trackwheel. Click Next Slide.
Related topic
About vCard address book attachments (See page 35.)
To view the previous slide in a presentation, click the
trackwheel. Click Prev Slide.
To stop a slide show, click the trackwheel. Click Close.
Attachments shortcuts
To zoom, rotate, enhance, or save a slide, in slide view
or text and slide view, click a slide. Click View. Click
the trackwheel. Click a menu item.
To change the column size, press the exclamation
point (!) key.
To move to a specific cell, press 5.
To display the contents of a cell, press the Space key.
Note:
To zoom into an image, press 3. To continue zooming
into an image, hold the Shift key and roll the
trackwheel.
You can only navigate presentation attachments if
your BlackBerry® device is integrated with an account
that uses BlackBerry Enterprise Server™ version 4.1 or
later.
To zoom out of an image, press 9. To continue
zooming out of an image, hold the Shift key and roll
the trackwheel.
About vCard address book
attachments
To zoom to the original image size, press 5.
To rotate an image, press the period (.) key.
To view the next slide in a presentation, press 6.
To view the previous slide in a presentation, press 4.
Address book attachments (vCard®.vcf files) contain
contact information for a specific user. When you add
a vCard attachment to your email message, recipients
of your message can view and add your contact
information to their BlackBerry® device address books.
When you open a message that contains a vCard
attachment, a book icon appears at the bottom of the
message with the name of the attached contact.
To view a presentation as a slide show, press the
question mark (?) key.
To stop a slide show, hold the Escape button.
To move between presentation views, in a
presentation, press the Symbol key.
35
User Guide
36
9
Note:
account that is integrated with your BlackBerry®
device.
Turn on wireless email reconciliation
Reconcile deleted messages
About PIM synchronization
Related topic
Turn on wireless PIM synchronization
Synchronization — frequently asked questions
Can I reconcile email messages over the wireless
network? (See page 117.)
About email reconciliation
Reconcile deleted messages
If you turn on email reconciliation, any messages that
you file or delete on your BlackBerry® device should
also be filed or deleted in your desktop email program.
Likewise, any changes that you make to messages in
your desktop email program should be reflected on
your device.
To set how deleted messages are reconciled between
your BlackBerry® device and desktop email program,
in the messages options, click Email Reconciliation.
Set the Delete On field. Click the trackwheel. Click
Save.
If your device integration option supports wireless
email reconciliation, changes are reconciled over the
wireless network.
Note:
Set the email reconciliation option for each email
account that is integrated with your device.
If your device integration option does not support
Related topic
the BlackBerry Desktop Software Online Help for more
information about manual email reconciliation.
Delete multiple messages at one time (See page 19.)
About PIM synchronization
Related topic
You can synchronize personal information
management (PIM) items such as tasks, memos,
contacts, and calendar entries so that the entries on
your BlackBerry® device and in your desktop email
program are similar.
Can I reconcile email messages over the wireless
network? (See page 117.)
Turn on wireless email reconciliation
In the messages options, click Email Reconciliation.
Set the Wireless Reconcile field to On. Click the
trackwheel. Click Save.
User Guide
If your device is integrated with an account that uses
BlackBerry Enterprise Server™ version 4.0 or later and
wireless PIM synchronization is turned on, PIM items
should be synchronized over the wireless network. You
can turn wireless PIM synchronization on and off using
the device.
Related topic
Can I synchronize PIM items over the wireless
network? (See page 117.)
If your device is integrated with an account that uses
BlackBerry Enterprise Server™ version 2.1 or later and
wireless calendar synchronization is enabled, calendar
entries should be synchronized over the wireless
network. You can synchronize all other PIM items
using the BlackBerry Desktop Software. See the
or configuring wireless calendar synchronization using
the BlackBerry Desktop Software.
Related topic
Can I synchronize PIM items over the wireless
network? (See page 117.)
Turn on wireless PIM synchronization
In the tasks, memo, address book, or calendar options,
set the Wireless Synchronization field to Yes. Click
the trackwheel. Click Save.
If the Wireless Synchronization option does not appear
on the BlackBerry® device, you can set wireless
calendar synchronization using the BlackBerry
Desktop Software. See the BlackBerry Desktop
Software Online Help for more information.
Notes:
If you have been using your device with wireless PIM
synchronization turned off or you are turning on
wireless PIM synchronization for the first time,
synchronize your device using the BlackBerry Desktop
Software before you turn on wireless PIM
synchronization.
If you turn on wireless PIM synchronization on the
device, you cannot synchronize PIM items using the
BlackBerry Desktop Software.
38
10
Backing up and restoring device data
About backing up and restoring device data
Restore device data
5. Click Activate.
About backing up and restoring
device data
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later, settings on your device that are
not saved in your desktop email program should be
backed up over the wireless network. These settings
include fonts, bookmarks, and other device settings.
Information that is saved as part of personal
information management (PIM) synchronization or
wireless email reconciliation is not backed up.
If you are using the BlackBerry Desktop Software with
your device, you can back up and restore your device
data using the Backup and Restore tool. See the
BlackBerry Desktop Software Online Help for more
information about backing up and restoring device
data manually.
If your device is integrated with an account that uses
BlackBerry Enterprise Server™ version 4.0 or later and
your device data is lost or erased, you should be able
to restore your device data (but not message data)
using enterprise activation.
Restore device data
1. In the device options, click Advanced Options.
2. Click Enterprise Activation.
3. Type your corporate email address and the
password supplied by your system administrator.
4. Click the trackwheel.
User Guide
40
11
Typing
Type text
•
To choose a selection from the list and continue
typing the same word, press the Enter key or click
the trackwheel.
Cut or copy text
Paste text
•
•
To choose a selection from the list and begin
About AutoText
Use AutoText
To delete letters that you have typed, press the
Backspace/Delete key.
Create AutoText entries
Add entries to the custom word list
Manage the custom word list
Set the cursor speed
Typing shortcuts
Related topic
Typing shortcuts (See page 43.)
Cut or copy text
1. Click the trackwheel.
2. Click Select.
Typing — frequently asked questions
3. Select text.
4. Click the trackwheel.
5. Click Cut or Copy.
Type text
To type in most fields, use the SureType™ input
method. Press each letter key once until you have
typed an entire word. When you use SureType
technology, the letters on the screen should change
automatically until the word is complete.
Paste text
Place the cursor where you want to insert the cut or
copied text. Click the trackwheel. Click Paste.
For example, to type the word run, press ER + UI +
BN. Press the Space key.
Related topic
If you type all the letters in a word and the word does
not appear correctly, or if more than one word is
available for the keys that you pressed, use the list
that appears on the screen to build a word.
Copy and paste calculations (See page 65.)
About AutoText
•
To move through selections in the list, press the
Next key. You can also roll the trackwheel to move
forward and backward in the list.
AutoText is designed to replace specific text that you
type with the appropriate AutoText entry. Use
AutoText to correct spelling and to replace
abbreviations with complete words.
User Guide
Your BlackBerry® device has built-in AutoText entries
that correct common mistakes. For example, AutoText
changes hte to the.
Manage AutoText entries
In the device options, click AutoText. Click an
You can create AutoText entries for your common
typing mistakes or for abbreviations. For example, you
might create an AutoText entry that replaces ttyl with
talk to you later.
•
•
Edit
Delete
Related topic
Turn off AutoText for SMS messages (See page 42.)
Use AutoText
Turn off AutoText for SMS messages
In the device options, click SMS. Set the Disable
AutoText field to Yes. Click the trackwheel. Click
Save.
Related topics
About AutoText (See page 41.)
Create AutoText entries (See page 42.)
About the custom word list
Turn off AutoText for SMS messages (See page 42.)
When you type, the BlackBerry® device displays
possible words and letter combinations in a list below
the text. If you type a word or letter combination that
the device does not recognize, the word or letter
combination is added to the custom word list. The
next time that you type the word or letter
combination, you can select it from the list that
appears.
Create AutoText entries
1. In the device options, click AutoText.
2. Click the trackwheel.
3. Click New.
4. In the Replace field, type the text to replace.
5. In the With field, type the text that should appear.
You can also add entries manually to the custom word
list.
6. In the Using field, set whether the entry is
capitalized exactly as typed (Specified Case) or
whether the entry is capitalized according to its
context (SmartCase).
If you do not use the words on the custom word list,
they are deleted after a period of time.
9. Click Save.
Add entries to the custom word list
2. Click the trackwheel.
3. Click New.
Related topic
4. Type a word or letter combination.
5. Click the trackwheel.
What is the Insert Macro menu item? (See page 44.)
Turn off AutoText for SMS messages (See page 42.)
6. Click the trackwheel.
7. Click Save.
42
11: Typing
Related topic
To insert the at sign (@) and periods in an Email field,
press the Space key.
About the custom word list (See page 42.)
To turn on NUM lock, press the Shift key + the Alt key.
To turn off NUM lock, press the Alt key.
Manage the custom word list
To switch between the SureType and multi-tap input
methods in a text field, hold the * key.
In the device options, click Custom Wordlist. Click an
entry. Click one of the following menu items:
To type a number in a number field, press a number
key. You do not need to press the Alt key.
•
•
•
Edit
Delete
To type a letter in a number field, hold the Alt key and
use the multi-tap input method. To type the first letter
on a key, press the letter key once. To type the second
letter on a key, press the letter key twice.
Clear Custom Wordlist
Set the cursor speed
In the device options, click Screen/Keyboard. Set the
Key Rate field. Click the trackwheel. Click Save.
To type a password, use the multi-tap input method.
To type the first letter on a key, press the letter key
once. To type the second letter on a key, press the
letter key twice.
To type a number in a password field, hold the Alt key
and press the number key.
Typing shortcuts
To type words quickly using the SureType™ input
method, type the entire word before you attempt to
make a correction.
key.
To scroll through the list that appears when you type,
press the Next key or roll the trackwheel.
To choose a selected item in the list that appears
when you type, press the Enter key or click the
trackwheel.
type?
To finish typing a word and begin typing a new word,
press the Space key.
word list automatically?
To insert a period, press the Space key twice. The next
when I type?
letter is capitalized.
To capitalize a letter, hold the letter key until the
capitalized letter appears.
How do I type a word that my device does not
recognize?
To type the alternate character on a key, press the Alt
key and press the character key.
Can I change the input method for my device?
What is the Insert Macro menu item?
How do I undo an AutoText change?
To type a symbol, press the Alt key + the Symbol key.
To view more symbols, press the Symbol key again.
Type the letter that appears below the symbol.
To type an accent or special character, hold the letter
key and roll the trackwheel. Click a selected character.
When I type words, an indicator appears at the end of
the word list. What does this indicator mean?
43
User Guide
Can I turn off address book name
recognition when I type?
Your BlackBerry® device should recognize the names
of contacts when you type them. To turn off address
book name recognition, in the device options, click
Language. Click Input Options. Set the Use Address
Book as Data Source field to Off. Save the changes.
Can I change the input method for
my device?
Yes. Your BlackBerry® device uses the SureType™
input method in most text fields and the multi-tap
input method in phone number and password fields.
To switch between input methods when you are
typing, hold the * key.
To use the multi-tap input method in all fields, in the
device options, click Language. Set the Input Method
field to <Language> Multitap. Save the changes.
Can I prevent words from being
added to my custom word list
automatically?
Yes. In the device options, click Language. Click Input
Options. Set the Auto Word Learning and Auto Word
Learning from Messages fields to Off. Save the
changes.
To use the SureType input method in most fields
except the password and number fields, in the device
options, click Language. Set the Input Method to
<Language>. Save the changes.
What is the Insert Macro menu item?
The Insert Macro menu item enables you to insert
common variables, such as the current date or current
time, into your AutoText entries.
Can I change the order of items in
the list that appears when I type?
Yes. The most frequently chosen words or letter
combinations appear at the top of the list. To set your
BlackBerry® device so that frequently chosen items do
not appear first, in the device options, click Language.
Click Options. Set the Frequency Learning field to
Off.
How do I undo an AutoText change?
If you type text and the AutoText feature
automatically replaces it, you can undo the change by
pressing the Backspace/Delete key twice.
How do I type a word that my device
does not recognize?
When I type words, an indicator
appears at the end of the word list.
What does this indicator mean?
If the current input language of your BlackBerry®
device is different from the default language of your
device, a rectangle with the short form of the current
input language appears in the word list.
Use the list to help you type text such as an
unrecognized word, acronym, or web address. Press
the first letter key once. To select a letter from the list,
press the Next key. Press the subsequent letter key in
the word. To select the correct letter combination from
the list, press the Next key. Continue to type and
select the correct letters until the text that you want to
type appears in the list. To select from the list, press
the Enter key.
44
12
Browser
About the browser
Use the BlackBerry Browser to view HTML web pages.
If your device is integrated with an account that uses
the BlackBerry Enterprise Server™, the BlackBerry
Browser also enables you to view your corporate
intranet. Contact your system administrator for more
information.
Go to web pages
View images
Navigate images
Use the Internet Browser, which is available from some
service providers, to view HTML web pages. Contact
your service provider for more information about
Internet Browser support.
Save images
View files
Go to web pages
1. In the browser, click the trackwheel.
2. Click Go To.
Save web page requests
Create bookmarks
3. Type a web address.
4. Click the trackwheel.
5. Click OK.
Clear browser caches
About WTLS
Notes:
Browser shortcuts
To insert a period, press the Space key.
Browser — frequently asked questions
To insert a slash mark (/), press the Shift key + the
Space key.
The Go To dialog box tracks the web addresses that
you type. To go to a web page on the list, click the
web address. Click OK.
About the browser
Your BlackBerry® device supports multiple browser
types. Depending on your service provider and your
integration option, more than one browser might
appear. Your service provider might also change the
browser name to reflect available services.
Use the browser
To select text and images as you scroll through a web
page, click the trackwheel. Click Select Mode.
Use the WAP Browser on your device to view WML
web pages.
To select only links and fields as you scroll through a
web page, click the trackwheel. Click View Mode.
User Guide
To open the browser and display a list of useful
bookmarks provided by your service provider, press the
Convenience key.
Related topic
Navigate images (See page 46.)
To follow a link, click the link. Click Get Link.
Navigate images
To stop loading a web page, click the trackwheel. Click
Stop.
To pan horizontally across an image, hold the Alt key
and roll the trackwheel.
To view the previous web page in the history, click the
trackwheel. Click Back.
To zoom into or out of an image, click the trackwheel.
Click Zoom In or Zoom Out.
To view the next web page in the history, click the
trackwheel. Click Forward.
To zoom to the original image size, click the
trackwheel. Click Zoom 1:1.
To go to your home page, click the trackwheel. Click
Home.
To turn an image 90 degrees in a clockwise direction,
click the trackwheel. Click Rotate.
To view a list of the last 20 web pages that you
visited, click the trackwheel. Click History.
Note:
To refresh the current web page, click the trackwheel.
You can navigate full images or images in the pictures
list.
Click Refresh.
To view the address for the current web page, click the
trackwheel. Click Page Address.
Copy links, images, or web page
addresses
To view the address for a link, click the link. Click Link
Address.
On a web page, click a link or image. Click Link
Address, Image Address, or Page Address. Click
Copy Address.
To view the address for an image, click the image.
Click Image Address.
To move the browser to the background to use
another program, click the trackwheel. Click Hide.
to insert the copied text. Click the trackwheel. Click
Paste.
To close the browser, click the trackwheel. Click Close.
Related topic
View images
How do I select images and text on a web page? (See
page 122.)
To set how images load in your browser, in the
browser options, click Browser Configuration. To load
images while the page is loading, set the Show
Images field. To show image placeholders if images
do not load, set the Show Image Placeholders field to
Yes. Click the trackwheel. Click Save.
Send links or images in email
messages
1. On a web page, click a link or image.
2. Click Link Address or Image Address.
3. Click Send Address.
To load some images after the web page is loaded,
click the trackwheel. Click More Images. To load all
the images, click the trackwheel. Click All Images.
To view an image on its own page, click the image.
Click Full Image. To return to the web page, click the
trackwheel. Click Back.
4. In the To field, type an email address or a contact
name.
46
12: Browser
5. Type a message.
6. Click the trackwheel.
7. Click Send.
View files
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.1 or later, you can view .doc, .pdf, .ppt, .txt,
.wpd, and .xls file types in the browser. On a web page,
click the file link. Click Get Link.
Note:
an email address or a contact name. Send the
message.
Save web page requests
While a web page is loading, you can save the web
page request in the messages list. Saving the request
to the messages list enables you to use other
programs while you are waiting for the web page to
load. Click the trackwheel. Click Save Request.
Related topic
How do I select images and text on a web page? (See
page 122.)
You can also save a web page that has finished
loading in the messages list. Saving a fully loaded web
page enables you to open the text on the web page at
any time. On the web page, click the trackwheel. Click
Save Page.
Save images
You can save .jpeg, .png, .gif, and .bmp web page
images in the pictures list. On a web page, click an
image. Click Save Image. After the image is saved in
the pictures list, click the trackwheel. Click Save.
Note:
A saved web page displays content that was current at
the time that the web page was saved. To update the
content on a saved page, click the trackwheel. Click
Note:
Depending on your service provider, you might not be
able to save images.
Related topics
Set the Home screen background image (See page
75.)
Create bookmarks
On a web page, click the trackwheel. Click Add
Bookmark.
Navigate images (See page 46.)
How do I select images and text on a web page? (See
page 122.)
Manage bookmarks
In the bookmarks list, click a bookmark. Click one of
the following menu items:
Manage saved images
In the pictures list, click an image. Click one of the
following menu items:
•
•
Edit Bookmark
Delete Bookmark
•
•
Open
Related topic
Delete
Organize bookmarks into folders (See page 48.)
47
User Guide
To edit a web address in the Go To dialog box, hold
the Alt key and roll the trackwheel. In the Go To field,
edit the text. Click the trackwheel. Click OK.
Organize bookmarks into folders
In the bookmarks list, click a folder. Perform one of the
following actions:
To move to the next page in the history, press 6.
To move to the previous page in the history, press 4.
To move down a page, press 9.
•
•
To add a folder, click Add Subfolder.
To open a bookmark folder with subfolders, click
Expand.
To move up a page, press 3.
•
•
•
To close a bookmark folder with subfolders, click
Collapse.
To view a file link, press the Enter key.
To stop a web page from loading, press the Escape
button.
To rename a folder that you added, click the
trackwheel. Click Rename Folder.
To move to a specific web page, press the period (.)
key.
To move a bookmark into a folder, click the
bookmark. Click Move Bookmark. Roll the
trackwheel to move the bookmark. Click the
trackwheel.
To move between full-screen mode and normal mode,
press the exclamation point (!) key.
To close the browser, hold the Escape button.
Clear browser caches
In the browser options, click Cache Operations. Click
the button for a type of cache.
About WTLS
Browser security layer that is designed to provide
security for WAP services.
Related topic
How do I set WAP Browser security options? (See page
123.)
Browser shortcuts
To return to the last page that you viewed, press the
Escape button.
To insert a period in the Go To dialog box, press the
Space key.
To insert a slash mark (/) in the Go To dialog box,
press the Shift key + the Space key.
48
13
Related topic
Legal notice (See page 135.)
Download ring tones
1. On a web page, click a .mid or .mp3 file link.
2. Click Get Link.
Download themes
3. Click Menu.
4. Click Save.
About browser push
5. Type a name for the ring tone.
6. Click OK.
Turn on browser push
Downloading — frequently asked questions
Note:
the trackwheel. Click Show Tunes. Click the
On a web page, click a link for a program. Click Get
Related topics
Related topics
Why did a new program appear on my device? (See
page 50.)
Can I listen to a ring tone before I download it? (See
page 50.)
Legal notice (See page 135.)
Manage ring tones (See page 71.)
About profiles (See page 71.)
Legal notice (See page 135.)
Manage programs
To view a list of programs that are currently loaded on
your BlackBerry® device, in the device options, click
Advanced Options. Click Applications.
About browser push
Browser push is designed to enable you to receive
content on your BlackBerry® device from web
applications without requesting it. For example, you
can receive updates or notifications for weather, stock
quotes, or news.
To view details for a third-party program, on the
Applications screen, click the program. Click
Properties.
To delete a third-party program, click the program.
Click Delete.
User Guide
You can turn on browser push for your WAP Browser,
your BlackBerry Browser, or both browser types. You
can also set which hosts provide this information to
you.
questions
Why can’t I load new programs onto my device?
Why did a new program appear on my device?
What software version do I have on my device?
Can I listen to a ring tone before I download it?
Set notification for different types of browser push
information, including service load information (web
pages or applications), service indication information
(web page addresses or messages), or other types of
information.
When you receive a notification, an icon should
appear in the messages list.
Why can’t I load new programs onto
my device?
Verify that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
If you set the browser push notification to Prompt, a
dialog box appears when you receive a notification.
If you set the browser push notification to Auto, a
dialog box might also appear, if specified by the
sender.
Your device must also have sufficient available
memory to load a program.
If you set the browser push notification to Reject, you
receive no additional notification.
If the program still does not load and your device is
integrated with an account that uses the BlackBerry
Enterprise Server™, certain programs might not be
available to you. Contact your system administrator for
more information.
Turn on browser push
1. In the device options, click Advanced Options.
2. Click Browser Push.
3. Select one or more of the check boxes.
Why did a new program appear on
my device?
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later, your system administrator can
send selected programs over the wireless network.
Contact your system administrator for more
information.
4. Set the options for browser push notification
types.
5. Click the trackwheel.
6. Click Save.
Note:
If you turn on browser push notification for your WAP
Applications check box.
Can I listen to a ring tone before I
download it?
Yes. On a web page, click a ring tone file link. Click
Get Link.
Related topics
About browser push (See page 49.)
About the browser (See page 45.)
To preview the ring tone, click Play.
To stop listening to the ring tone, click Stop.
50
14
Add contacts
Manage contacts
Click a contact. Click one of the following menu items:
•
•
•
View
Edit
Create mailing lists
Delete
Create categories
Related topic
Share your address book with a paired Bluetooth-
enabled device (See page 68.)
Delete categories
Create mailing lists
1. In the address book, click the trackwheel.
2. Click New Group.
Add pauses or waits
Search for contacts in your company address book
Search for PIM items
3. Type a name for the mailing list.
4. Click the trackwheel.
Contacts — frequently asked questions
5. Click Add Member.
6. Click a contact.
Add contacts
1. In the address book, click the trackwheel.
7. Click Continue.
8. Repeat steps 4 to 7 to add other contacts to the
mailing list.
2. Click New Address.
3. Type the contact information.
4. Click the trackwheel.
5. Click Save.
9. Click the trackwheel.
10. Click Save Group.
Note:
Note:
If you create a mailing list, it is not copied to or from
your desktop email program.
To add a contact from a message, memo, call log, or
web page, click the contact. Click Add to Address
Book. Type any additional information. Click the
trackwheel. Click Save.
Manage mailing lists
Click a mailing list. Click one of the following menu
items:
User Guide
•
•
•
View Group
Related topic
About custom phone tunes (See page 52.)
Edit Group
Delete Group
Create profile exceptions (See page 72.)
Manage contacts in mailing lists
About categories
Click a contact. Click one of the following menu items:
You can create categories in which to group your
contacts, tasks, and memos. You can also narrow the
contacts, tasks, and memos that appear based on
categories.
•
•
•
•
View Member
Change Member
Delete Member
Add Member
Category names are not case sensitive. More than one
category can apply to a contact, task, or memo. If you
use IBM® Lotus Notes® as your desktop email
program, you can apply more than one category to a
task on your BlackBerry® device, but only one
category synchronizes with the task in your desktop
email program.
Note:
When you delete members from a group or delete a
group, the contacts remain in the address book.
Categories are shared between the address book, the
task list, and the memos list and changes that are
made in one program are made in all programs.
About custom phone tunes
You can add a custom phone tune for a contact
without changing other notifications.
Custom phone tune settings appear in both the
address book and the profiles list. When you add a
custom phone tune to a contact, a new profile
exception appears in the profiles list as “Calls From
<contact>.” Profile exceptions are shared between the
address book and the profiles list and changes made
in one program are made in the other program.
Create categories
1. In the address book, task list, or memos list, click
the trackwheel.
2. Click Filter.
3. Click the trackwheel.
4. Click New.
5. Type a name for the category.
7. Click the trackwheel.
8. Click Close.
Add a phone tune for a contact
1. In the address book, click a contact.
2. Click Edit.
3. Click the trackwheel.
4. Click Add Custom Phone Tune.
5. Set a phone tune.
Related topic
About categories (See page 52.)
6. Click the trackwheel.
7. Click Save.
52
14: Contacts
Apply categories to contacts, tasks,
or memos
When creating or editing a contact, in a phone
number field, click the trackwheel. Click Add Wait or
Add Pause. Type the additional numbers.
1. When creating or editing a contact, task, or memo,
click the trackwheel.
2. Click Categories.
3. Select a category.
4. Press the Space key.
5. Click the trackwheel.
6. Click Save.
Related topic
About pauses and waits (See page 53.)
About remote address book search
To find and add contacts from your company address
book, your BlackBerry® device must be integrated with
an account that uses BlackBerry Enterprise Server™
version 3.5 or later for Microsoft® Exchange,
BlackBerry Enterprise Server version 2.2 or later for
IBM® Lotus® Domino®, or BlackBerry Enterprise
Server version 4.0 or later for Novell® GroupWise®.
Contact your system administrator for more
information.
Sort contacts, tasks, or memos by
category
In the address book, task list, or memos list, click the
trackwheel. Click Filter. Select a category. Press the
Space key.
Note:
To view your full list of contacts again, click the
trackwheel. Click Filter. Clear the check box beside the
selected category.
Search for contacts in your company
address book
In the address book, click the trackwheel. Click
Lookup. Type the name of a contact. Click the
trackwheel.
Delete categories
In the address book, task list, or memos list, click the
trackwheel. Click Filter. Click a category. Click Delete.
Note:
search results.
Note:
When you delete a category, the category is deleted,
but any contacts, tasks, or memos to which the
category applied are not deleted.
Related topics
About remote address book search (See page 53.)
Manage remote address book search results (See page
53.)
About pauses and waits
Use a wait or a pause to separate additional numbers,
for example a password or extension, from a main
phone number. After dialing the main phone number,
your BlackBerry® device either pauses before dialing
the additional numbers (pause) or prompts you to type
them (wait).
Manage remote address book search
results
In the remote address book search results, click a
contact. Perform one of the following actions:
53
User Guide
•
•
To add a contact to your address book, click Add.
To add all the contacts found during the search,
click Add All.
•
•
To view information for a contact, click View.
To delete a contact from the search results, click
Delete.
•
•
To delete the search results, click Delete Lookup.
To start a new search, click Lookup.
54
15
About the calendar
Navigate the calendar
Navigate the calendar
To go to a specific date, click the trackwheel. Click Go
to Date. Set the date. Click the trackwheel.
To go to the current date, click the trackwheel. Click
Today.
Schedule appointments
Schedule appointments quickly
Schedule meetings
To move forward or back by a time period, click the
trackwheel. Click Prev or Next.
Manage meeting participants
Search for PIM items
Schedule appointments
1. In the calendar, click the trackwheel.
2. Click New.
3. Type the appointment details.
Calendar shortcuts
4. If the appointment is recurring, set how frequently
it should recur.
Calendar — frequently asked questions
5. Click the trackwheel.
About the calendar
6. Click Save.
In the BlackBerry® device calendar, you can view your
appointments and meetings in one of four views. Day,
Week, and Month views show all your appointments
for the selected time period. Agenda view shows all
your scheduled appointments in a list.
Notes:
If your appointment recurs, perform the following
actions:
Set the Every field to change the frequency of the
appointment. For example, to set an appointment to
recur every three days, set the Every field to 3.
Change the calendar view
To change to another calendar view (Day, Week,
Month, or Agenda), click the trackwheel. Click a view.
Select the Relative Date check box for the
appointment to recur on a relative date (for example,
on the last Friday of each month).
To change the default view that appears when you
open the calendar, in the calendar options, set the
Initial View field. Click the trackwheel. Click Save.
In the Days field, set the days on which the weekly
appointment should recur. To select a day, press the
Space key.
User Guide
Related topics
2. Click New.
Change the default reminder time for appointments
and meetings (See page 56.)
3. Type the meeting details.
4. If the meeting is recurring, set how frequently it
should recur.
About power off and reminders (See page 79.)
5. Click the trackwheel.
6. Click Invite Attendee.
7. Click a contact.
Schedule appointments quickly
In the calendar options, verify that the Enable Quick
Entry field is set to Yes. In Day view, beside the start
time, type the subject of the appointment. Type a
location in parentheses. Click the trackwheel.
8. Click Invite.
9. Repeat steps 5 to 8 to add other contacts to your
meeting.
Note:
10. Click the trackwheel.
location, hold the Shift key and roll the trackwheel. To
11. C l i c k Save.
Notes:
If your meeting recurs, perform the following actions:
Related topics
Set the Every field to change the frequency of the
appointment. For example, to set an appointment to
recur every three days, set the Every field to 3.
Change the default reminder time for appointments
and meetings (See page 56.)
About power off and reminders (See page 79.)
Select the Relative Date check box for the
appointment to recur on a relative date (for example,
on the last Friday of each month).
Change the default reminder time
for appointments and meetings
field to the amount of time before the appointment
default is 15 minutes.
appointment should recur. To select a day, press the
Related topics
Change the default reminder time for appointments
and meetings (See page 56.)
Related topics
About power off and reminders (See page 79.)
About power off and reminders (See page 79.)
Can I set a snooze time for task and calendar
reminders? (See page 128.)
Manage appointments and meetings
To view your list of appointments, in Month view, click
What is dismissed if I click Dismiss All in a reminder?
(See page 128.)
a day. Click View Appts.
To view or change details for an appointment or
meeting, click the appointment or meeting. Click
Open.
Schedule meetings
1. In the calendar, click the trackwheel.
56
15: Calendar
To delete an appointment or meeting, click the
appointment or meeting. Click Delete.
Respond to meeting invitations
In an open meeting invitation, click the trackwheel.
Click one of the following menu items:
•
•
•
Accept or Accept with comments
Tentative or Tentative with comments
Decline or Decline with comments
Notes:
To check your calendar when replying to a meeting
invitation, click the trackwheel. Click View Calendar.
If you delete a meeting invitation from the messages
list before you accept or decline it, the meeting is
deleted from your desktop calendar.
Manage meeting participants
Open a meeting. In an Accepted or Declined field,
click a contact. Click one of the following menu items:
•
•
•
Invite Attendee
Change Attendee
Remove Attendee
Calendar shortcuts
For these shortcuts to work in Day view, in the
calendar options, set the Enable Quick Entry field to
No.
To create an appointment, press the period (.) key.
To move to the next day, week, or month, press 6.
To move to the previous day, week, or month, press 4.
To move the cursor horizontally in Week view, hold the
Alt key and roll the trackwheel.
To move the cursor vertically in Month view, hold the
Alt key and roll the trackwheel.
57
User Guide
58
16
Tasks
Create tasks
In the Days field, set the days on which the weekly
task should recur. To select a day, press the Enter key.
Manage tasks
Change task status
Manage tasks
Click a task. Click one of the following menu items:
Create categories
Sort contacts, tasks, or memos by category
Delete categories
•
•
•
•
•
•
Open
Delete
Delete Completed
Mark Completed
Mark In Progress
Hide Completed
Search for PIM items
Tasks — frequently asked questions
Create tasks
1. In the task list, click the trackwheel.
2. Click New.
Deferred, open the task. Edit the Status field.
3. Type the task details.
4. Set a due date for the task.
5. If the task is recurring, set how frequently it
should recur.
6. Click the trackwheel.
7. Click Save.
task, or memo?
Notes:
If your task recurs, perform the following actions:
tasks, or memos I have saved?
Set the Every field to change the frequency of the
task. For example, to set a task to recur every three
days, set the Every field to 3.
Can I set a snooze time for task and calendar
reminders?
Select the Relative Date check box for the task to
recur on a relative date (for example, on the last Friday
of each month).
What is dismissed if I click Dismiss All in a reminder?
Can I show tasks in the device calendar?
User Guide
60
17
Write memos
Can I clear all the categories that apply to a contact,
task, or memo?
How do I know how many contacts, calendar entries,
tasks, or memos I have saved?
Create categories
Sort contacts, tasks, or memos by category
Delete categories
Search for PIM items
Memos — frequently asked questions
Write memos
1. In the memos list, click the trackwheel.
2. Click New.
3. Type a title.
4. Type the body of the memo.
5. Click the trackwheel.
6. Click Save.
Manage memos
Click a memo. Click one of the following menu items:
•
•
•
View
Edit
Delete
Memos — frequently asked questions
Can I remove the prompt that appears before I delete
contacts, calendar entries, tasks, or memos?
User Guide
62
18
Set the alarm
How do I change the alarm volume?
What is the escalating volume level?
Silence the alarm
Turn off the alarm
Why didn’t my alarm notify me on a
Saturday or Sunday?
Alarm — frequently asked questions
In the alarm, verify that the Active on Weekends field
is set to Yes. If this field is set to No, your alarm does
not notify you on Saturdays or Sundays.
Set the alarm
1. In the alarm, set the Daily Alarm field to On.
2. Set the time when the alarm should sound.
3. Set whether to snooze the alarm and the length of
the snooze.
How do I change the alarm volume?
In the alarm, set the Volume field.
4. Set a type of notification for the alarm.
5. Click the trackwheel.
When you set the volume, you can also customize the
notification, including the tune and the number of
times that the tune plays.
6. Click Save.
When you set the alarm, a bell icon appears beside the
date in the device status section of the screen.
Related topic
About power off and reminders (See page 79.)
Silence the alarm
Press any key. If snooze is enabled, in the Daily Alarm
dialog box, click Snooze.
Turn off the alarm
In the alarm, set the Daily Alarm field to Off.
Alarm — frequently asked questions
Why didn’t my alarm notify me on a Saturday or
Sunday?
User Guide
64
19
Use the calculator memory
Copy and paste calculations
Convert measurements
Calculator shortcuts
Calculator shortcuts
To display the result of your calculation, press the
Enter key.
Use the calculator memory
To store a number in the memory, type a number.
Press the Alt key + the period (.) key.
To recall the number in the memory, press the Alt key
+ the comma (,) key.
To delete the number in the memory, press the Alt key
+ the Backspace/Delete key.
To subtract from the number that is currently stored in
the memory, type a number. Press the Alt key + the
exclamation point (!) key.
Copy and paste calculations
Click the trackwheel. Click Copy.
To paste the calculation back into the calculator
display or into another program, click the trackwheel.
Click Paste.
Convert measurements
In the calculator, type a number. Click the trackwheel.
Perform one of the following actions:
•
To convert the number from imperial to metric,
click To Metric.
•
To convert the number from metric to imperial,
click From Metric. Click a conversion type.
User Guide
66
20
About Bluetooth wireless technology
Turn on or off the Bluetooth radio
About Bluetooth pairings
When you pair your BlackBerry® device with another
Bluetooth®-enabled device, you should be able to
connect to the other Bluetooth-enabled device over
the wireless network when it is within range of your
BlackBerry device (a typical range is approximately 10
meters).
Pair with another Bluetooth-enabled device
Bluetooth-enabled devices
After you pair with a Bluetooth-enabled device, you
can set your BlackBerry device to connect with that
Bluetooth-enabled device without prompting you.
Use Bluetooth wireless technology during a call
Share your address book with a paired Bluetooth-
enabled device
Bluetooth — frequently asked questions
Pair with another Bluetooth-enabled
device
About Bluetooth wireless technology
1. In the device options, click Bluetooth.
Bluetooth® wireless technology is designed to enable
your BlackBerry® device to establish wireless
connections with other Bluetooth-enabled devices,
such as a handsfree car kit or wireless headset, in close
proximity.
2. Click the trackwheel.
3. Click Add Device.
4. Click the name of a Bluetooth®-enabled device.
5. In the Enter passkey for <device name> field,
type a passkey.
6. Type the same passkey on the Bluetooth-enabled
device to which you are pairing.
Turn on or off the Bluetooth radio
To turn on the Bluetooth® radio, in the device options,
click Bluetooth. Click the trackwheel. Click Enable
Bluetooth.
Notes:
Verify that the Bluetooth-enabled device that you
want to pair with is in the correct mode for pairing.
To turn off the Bluetooth radio, in the device options,
click Bluetooth. Click the trackwheel. Click Disable
Bluetooth.
The names of Bluetooth-enabled devices with which
you have already paired appear in the list of paired
Bluetooth-enabled devices. They do not appear in the
list of Bluetooth-enabled devices that appears when
you click Add Device.
User Guide
Related topic
2. During a call, click the trackwheel. Click Activate
<Bluetooth device>.
About Bluetooth pairings (See page 67.)
Related topic
Manage paired Bluetooth-enabled
devices
About Bluetooth pairings (See page 67.)
In the list of paired Bluetooth®-enabled devices, click
a paired Bluetooth-enabled device. Click Device
Properties. Perform one of the following actions:
Share your address book with a
paired Bluetooth-enabled device
In the Bluetooth® options, in the Address Book
•
•
Edit the paired Bluetooth-enabled device name.
Transfer field, perform one of the following actions:
Set whether the paired Bluetooth-enabled device
can connect with your BlackBerry® device without
prompting.
•
•
To share all the contacts in your BlackBerry®
device address book, select All Entries.
To share contacts that you have had contact with
•
Set whether Bluetooth connections with your
BlackBerry device are encrypted.
recently over the phone, select Hotlist Only.
Note:
To remove a Bluetooth-enabled device from the list of
paired Bluetooth-enabled devices, click a Bluetooth-
enabled device. Click Delete Device.
Set how your BlackBerry device
appears to other Bluetooth-enabled
devices
In the Bluetooth® options, perform one of the
following actions:
•
In the Device Name field, type the name of your
BlackBerry® device.
•
In the Discoverable field, set whether your
BlackBerry device is available for pairing with
other Bluetooth-enabled devices.
Use Bluetooth wireless technology
during a call
1. Verify that the Bluetooth® radio is turned on and
that your BlackBerry® device is paired with a
Bluetooth-enabled device.
68
21
Set the date and time
If you have set the Date/Time Source field to Network
or BlackBerry, you can update the time. On the Date/
Time screen, click the trackwheel. Click Update Time.
Why is the time on my device incorrect?
Set the date and time
1. In the device options, click Date/Time.
2. Set the Time Zone field.
3. In the Date/Time Source field, set a date and
time source.
4. Click the trackwheel.
5. Click Update Time.
6. Click the trackwheel.
7. Click Save.
Note:
Depending on your service provider, multiple date and
time sources might be available.
•
•
•
To use the wireless network as the date and time
source, set the Date/Time Source field to
Network.
To use the BlackBerry® network as the date and
time source, set the Date/Time Source field to
BlackBerry.
To set the date and time yourself, set the Date/
Time Source field to Off. Set the other fields on
the Date/Time screen.
Why is the time on my device
incorrect?
If you have traveled to a different time zone, set the
Time Zone field to display the correct time zone.
User Guide
70
22
Profiles
Note:
To change the current notification profile quickly,
select a profile. Press the Space key.
Enable profiles
Create notification profiles
Create notification profiles
1. In the profiles list, click the trackwheel.
2. Click New Profile.
Create profile exceptions
Add a phone tune for a contact
Silence your device
3. Type a name for the profile.
4. Click an item.
5. Click Edit.
6. Set how you want to receive notification for that
item.
Set the alarm
7. Click the trackwheel.
8. Click Save.
Profiles — frequently asked questions
9. Click the trackwheel.
10. Click Save.
About profiles
Notification profiles are designed to alert you of
appointment and task reminders, and incoming
messages, calls, and browser content. You can create a
profile that specifies which sounds to use, whether to
notify you when the BlackBerry® device is in or out of
the holster, and what volume level to use. You can use
different sounds for each type of item.
Manage notification profiles
Click a profile. Click one of the following menu items:
•
•
Edit
Delete
The device has six preset notification profiles: Loud,
Vibrate, Quiet, Normal, Phone Only, and Off. You can
edit these default profiles, except for the Off profile.
You cannot delete them.
Manage ring tones
In the profiles list, click a profile. Click Show Tunes.
Click a ring tone. Click one of the following menu
items:
Enable profiles
•
•
•
Play
In the profiles list, click a notification profile. Click
Delete
Volume
Enable.
User Guide
Notes:
Notes:
The Volume option only sets how loud or quiet the
tune plays when you listen to it in the list. To change
the volume for your notification, edit the profile.
You can add multiple contacts to a profile exception.
In the From field, click the trackwheel. Click Add
Name.
You can only delete downloaded ring tones.
To add a custom tune for phone calls, select the
Custom Phone Tune check box. Set a phone tune.
If you set the Use Profile field to Active Profile and you
profile exception has no effect.
About custom notification
You can create exceptions to notification profiles to
receive different notification for incoming messages
and phone calls from specific contacts. For example,
you can create a profile exception that uses the Loud
profile when you receive messages and phone calls
from specific contacts, regardless of the active profile.
Related topics
About custom notification (See page 72.)
Manage profile exceptions (See page 72.)
Profile exceptions are applied based on the order in
which they appear. If you create multiple profile
exceptions that include the same contact, you must
decide which one to apply first by placing that profile
exception higher in the list.
Add a phone tune for a contact (See page 52.)
Manage profile exceptions
In the profiles list, click a profile exception. Perform
one of the following actions:
The BlackBerry® device has a preset profile exception
for important calls. You can add contacts to this profile
exception, or you can delete it.
•
•
To edit a profile exception, click Edit.
To move a profile exception higher or lower in the
list, click the profile exception. Click Move. Roll
the trackwheel to move the profile exception. Click
the trackwheel.
Create profile exceptions
1. In the profiles list, click the trackwheel.
2. Click New Exception.
•
•
To see the list of available tunes, click Show
Tunes.
3. In the Exception field, type a name for the profile
To delete a profile exception, click Delete.
exception.
4. In the From field, click the trackwheel.
5. Click Add Name.
Note:
To turn off a profile exception, select the exception.
Press the Space key. To turn on the profile exception
again, press the Space key.
6. Click a contact.
7. Click Continue.
8. In the Use Profile field, set the profile on which
Manage contacts in profile
exceptions
the exception should be based.
9. Click the trackwheel.
In a profiles exception, in the From field, click a
10. Click Save.
contact. Click one of the following menu items:
•
Change Name
72
22: Profiles
•
Delete Name
Why isn’t the ring tone being played
the number of times that I have set?
For phone calls, the number of times that the
BlackBerry® device sounds or vibrates is not
Silence your device
To silence your BlackBerry® device, in the profiles list,
select the Quiet profile.
determined by the number of beeps that you set in
your notification profile. The device sounds or vibrates
until the caller or the network ends the connection.
To receive only vibrate notification, in the profiles list,
select the Vibrate profile.
To turn off all notification, including profile exceptions
and LED notification, in the profiles list, select the Off
profile.
Why am I not receiving notification
for incoming calls or received
messages?
In the profiles list, verify that the Off profile is not
enabled. If this profile is enabled, all notification is
turned off, including profile exceptions and LED
notification.
Related topic
Silence the alarm (See page 63.)
questions
If you set the Custom Phone Tune field to MUTE, you
do not receive notification for calls from the contacts
that the exception applies to.
How do I set custom notification for
messages from a specific contact?
In the profiles list, create a new notification profile
that sets the tune that you want to use for your
messages. Create a profile exception for the contact
and set the Use Profile field to the new notification
profile.
or received messages?
How do I set custom notification for messages from a
specific contact?
Why can I not edit all the fields for a Calls From profile
exception?
Can I set one phone tune for all my profiles?
Why can I not edit all the fields for a
Calls From profile exception?
Calls From profile exceptions appear in the profiles list
when you add a custom phone tune from the address
book. Because these exceptions are for phone calls
only, you can only edit the Custom Phone Tune field.
What is the escalating volume level?
If you use the escalating volume level, the notification
volume level consistently increases until the
BlackBerry® device reaches the loudest volume level.
73
23
Turn on and off the device screen
Set the display language
Set the font
Turn on and off the device screen
key. When your BlackBerry® device is not used for a
power.
Related topics
About backlighting (See page 75.)
Adjust the brightness of the backlighting (See page
75.)
Set the Convenience key
About themes
Apply a theme to your device
Delete themes
Adjust the brightness of the
backlighting
In the device options, click Screen/Keyboard. Set the
Backlight Brightness field. Click the trackwheel. Click
Save.
Download themes
About backlighting
The screen and keyboard on your BlackBerry® device
are designed to be lit so that you can use your device
in various lighting levels.
To increase the brightness of the backlighting
temporarily, press the Power button.
Related topic
About backlighting (See page 75.)
Set how long backlighting remains
on
use your BlackBerry® device, in the device options,
Set the Home screen background
image
In the pictures list, click an image. Click Set As Home
Screen Image.
To clear the Home screen background, in the pictures
list, click the trackwheel. Click Reset Home Screen
Image.
Related topics
About backlighting (See page 75.)
Related topic
Adjust the brightness of the backlighting (See page
75.)
Save images (See page 47.)
User Guide
Your service provider might have supplied a link to a
preferred vendor of background images. In the pictures
list, click the trackwheel. Click More Images.
About themes
Depending on your service provider, you might be able
to set a theme on your BlackBerry® device that
changes how items such as programs, indicators,
words, and icons appear. Themes might be preloaded
on your device, or you might be able to download
themes that are in .cod file format.
Related topic
Save images (See page 47.)
Apply a theme to your device
Set the font
In the device options, click Theme. Click a theme. Click
In the device options, click Screen/Keyboard. Set the
Activate.
font information. Click the trackwheel. Click Save.
Note:
Note:
To activate a theme quickly, select a theme. Press the
Space key.
For large fonts, set the Antialias mode field.
About the Convenience key
Delete themes
By default, the Convenience key opens a list of
browser bookmarks made available by your service
provider. You can set which program this key opens.
See the printed documentation that accompanied
your device for more information about locating the
Convenience key.
In the device options, click Theme. Click a theme. Click
Delete.
Note:
You might not be able to delete themes that are
preloaded on your BlackBerry® device.
Set the Convenience key
In the device options, click Screen/Keyboard. Set the
Download themes
Your service provider might have supplied a link to a
preferred vendor of themes. In the device options, click
Theme. Click the trackwheel. Click More Themes.
Convenience Key Opens field.
Note:
If the program set in the Convenience Key Opens
field is removed from your BlackBerry® device, when
you press the Convenience key, nothing happens.
Related topic
About the Convenience key (See page 76.)
76
24
Set the display language
Can I change the input method for my device? (See
page 44.)
Set the input language
Add or remove a display language
Add or remove a display language
Why do some characters not appear correctly on my
device?
If your BlackBerry® Handheld Software supports
multiple languages, you can add and remove
languages using the Application Loader tool in the
BlackBerry Desktop Software. See the BlackBerry
Desktop Software Online Help for more information.
Set the display language
In the device options, click Language. In the
Language field, click a language. Click Save.
Why do some characters not appear
correctly on my device?
If your BlackBerry® device is integrated with the
BlackBerry Enterprise Server™ and the BlackBerry
Enterprise Server does not support the characters, the
characters do not appear correctly when you use the
BlackBerry Browser or open an attachment. Contact
your system administrator for more information.
About the input language
You can set an input language to use when you type.
This setting is different from the display language.
When you set an input language, AutoText and other
typing settings change to the selected language.
The input method field also controls whether your
BlackBerry® device uses the multi-tap or the
SureType™ input method.
If your device is integrated with the BlackBerry
Internet Service™, contact your service provider for
more information about supporting characters on your
device.
If the input language of your device is different from
the display language of your device, a rectangle with
the short form of the current input language appears
in the list that appears when you type.
method field, click a language. Click Save.
Related topics
About the input language (See page 77.)
Set the display language (See page 77.)
User Guide
78
25
Set the device to turn on and off automatically
Check the battery level
3. Specify the times when the BlackBerry® device
should turn on and off on weekdays.
4. Set the Weekend field to Enabled.
5. Specify the times when the device should turn on
Extend battery life
Reset the device
6. Click the trackwheel.
7. Click Save.
About power off and reminders
Related topic
If you turn off your BlackBerry® device by pressing the
Power button, or by clicking Turn Power Off on the
Home screen and selecting Turn Off, your device
should turn itself on at the following times:
About power off and reminders (See page 79.)
Check the battery level
In the device options, click Status.
•
•
when the alarm turns on
when the device is set to turn on automatically
To turn on your device when calendar reminders occur,
set the device to turn on and off automatically.
Extend battery life
Set the BlackBerry® device to turn on and off
automatically.
If you turn off your device by clicking Turn Power Off
on the Home screen and selecting Full Power Off, your
device does not turn on until you press the Power
button.
Disconnect from the wireless network when you are
not in a wireless coverage area.
Delete the original message when you send a reply.
Note:
Send a message to multiple contacts using Add To,
Add Cc, or Add Bcc.
Depending on your theme, the location and name for
Turn Power Off might change. See the printed
documentation that accompanied your device for
more information about the differences for your
theme.
Charge your device regularly.
Related topics
Set the device to turn on and off automatically (See
page 79.)
Set the device to turn on and off
automatically
Manage messages (See page 18.)
Add multiple contacts to a message (See page 18.)
1. In the device options, click Auto On/Off.
2. Set the Weekday field to Enabled.
26
Connect to the wireless network
How do I select a network when
traveling?
Network coverage — frequently asked questions
To scan for the most appropriate network, in your
device options set Scan Mode to Automatic. If you do
not want your BlackBerry® device to select a roaming
system, set the Scan Mode to Home Only.
Connect to the wireless network
To connect to the wireless network, verify that you are
in a wireless network coverage area. On the Home
screen, click Turn Wireless On.
Contact your service provider for more information
about roaming.
Notes:
To disconnect from the wireless network, on the Home
screen, click Turn Wireless Off. When your device is
not connected to the wireless network, you can
continue to use the features that do not require a
connection to the wireless network, such as managing
tasks or using the calculator. You should disconnect
from the wireless network in certain places, such as on
an airplane. See the BlackBerry Safety Information
Booklet for more information.
How do I register my device with the
network?
When you select a different network or load new
applications, your BlackBerry® device should register
automatically with the network. To register your device
manually, in the device options, click Advanced
Options. Click Host Routing Table. Click the
trackwheel. Click Register Now.
Depending on your theme, the location and name for
Turn Wireless On and Turn Wireless Off might
accompanied your device for more information.
Network coverage — frequently
asked questions
How do I select a network when traveling?
How do I register my device with the network?
User Guide
82
27
Type passwords
About the device password
Protect your device content
Compress device data
Store passwords
If you type your BlackBerry® device password
incorrectly five times, you must type blackberry before
you can continue. The next time that you type your
password, and on subsequent password attempts, the
characters that you type are displayed.
If you type your device password incorrectly ten times,
all information is erased from your device for security
reasons.
If your device is integrated with an account that uses
the BlackBerry Enterprise Server™, you might not be
able to change some security settings. Contact your
system administrator for more information.
Create random passwords
Copy passwords
Clear the device
Set a device password
1. In the device options, click Security Options.
2. Click General Settings.
3. Set the Password field to Enabled.
4. Set the other security options.
5. Click the trackwheel.
Set owner information
Third-party program control
Security — frequently asked questions
6. Click Save.
Type passwords
7. Type a device password.
When typing a password, use the multi-tap input
method. To type the first letter on a key, press the key
once. To type the second letter on a key, press the key
twice. If your password contains capital letters, hold
the letter key. To select a letter from the list that
appears when you type, press the Next key. To select a
letter and continue typing, press the Enter key. When
you have finished typing your password, press the
Enter key.
10. Click the trackwheel.
Related topics
About the device password (See page 83.)
Change the device password (See page 84.)
Turn off the device password (See page 84.)
User Guide
Change the device password
1. In the device options, click Security Options.
2. Click General Settings.
Lock and unlock the device
To lock the BlackBerry® device, with a device
password set, on the Home screen, click Lock.
To unlock your device, on the Lock screen, roll the
trackwheel. Click Unlock. Type your password. Press
the Enter key.
3. Click the trackwheel.
4. Click Change Password.
5. Type your current device password.
6. Click the trackwheel.
Related topic
About the device password (See page 83.)
7. Type a new device password.
About keyboard lock
If you do not set a device password, you can lock your
keyboard to prevent accidentally placing calls or
typing characters.
10. Click the trackwheel.
Related topics
About the device password (See page 83.)
Lock and unlock the keyboard
To lock the BlackBerry® device keyboard, on the Home
Turn off the device password (See page 84.)
screen, click Keyboard Lock.
Turn off the device password
1. In the device options, click Security Options.
2. Click General Settings.
To unlock the keyboard, double-click the trackwheel.
Related topic
About keyboard lock (See page 84.)
3. Set the Password field to Disabled.
4. Click the trackwheel.
About content protection and
compression
5. Click Save.
6. Type the device password.
7. Click the trackwheel.
Content protection is designed to encrypt your
BlackBerry® device data. When your device is
password locked, an open lock in the device status
section of the screen indicates that encryption is in
progress. A closed lock indicates that encryption is
complete. After you type your device password, data
on your device is decrypted as you access it.
Note:
corporate email account, you might not be able to
turn off the device password. Contact your system
administrator for more information.
To use content protection, you must set a device
password.
Related topic
Content compression is designed to reduce the size of
the data that is stored on your device and to maintain
the integrity of that data.
About the device password (See page 83.)
84
27: Security
Protect your device content
1. In the device options, click Security Options.
2. Click General Settings.
In the device options, click Security Options. Click
3. Set the Content Protection field to Enabled.
4. Click the trackwheel.
Related topics
About encryption keys (See page 85.)
Can I regenerate encryption keys from my device? (See
page 131.)
7. Click the trackwheel.
Related topic
About the password keeper
About content protection and compression (See page
84.)
Use the password keeper to create and store all your
passwords. The password keeper is locked with a single
password, so you can store all your passwords in one
place.
Compress device data
1. In the device options, click Security Options.
2. Click General Settings.
Use the password keeper to generate random
passwords that contain letters, numbers, and symbols.
The first time that you open the password keeper, you
must create a password keeper password. The
password keeper is designed to encrypt your
passwords. Passwords should be decrypted when you
type the password keeper password.
3. Set the Content Compression field to Enabled.
4. Click the trackwheel.
5. Click Save.
Warning:
The password keeper is designed to keep passwords
that are stored in the password keeper; however, if you
copy a password, you can paste it into other programs
on the BlackBerry® device. While the password is
copied on the clipboard, it is not encrypted.
7. Click the trackwheel.
Related topic
About content protection and compression (See page
84.)
Store passwords
1. In the password keeper, click the trackwheel.
About encryption keys
If your device is integrated with an account that uses
the BlackBerry Enterprise Server™ or BlackBerry
Desktop Redirector, encryption keys protect data as it
travels between the BlackBerry Enterprise Server or
BlackBerry Desktop Redirector and the device.
Encryption keys should be generated automatically,
but you can manually regenerate keys at any time.
2. Click New.
3. Type password information.
4. Click the trackwheel.
5. Click Save.
85
User Guide
Related topic
5. Type a new password keeper password.
6. Retype the new password keeper password.
7. Click OK.
About the password keeper (See page 85.)
Create random passwords
1. In the password keeper, click the trackwheel.
2. Click New.
Copy passwords
In the password keeper, click a password. Click Copy
to Clipboard.
3. Type a title for the password.
4. Click the trackwheel.
To clear the password from the clipboard, in the
password keeper, click the trackwheel. Click Clear
Clipboard.
5. Click Random Password.
To paste the password, place the cursor where you
want to insert it. Click the trackwheel. Click Paste.
8. Click Save.
Warning:
Passwords copied to or from the clipboard are not
encrypted.
Related topics
About the password keeper
Store passwords
About security self tests
The security self tests program is designed to verify
that security software is implemented properly on your
BlackBerry® device. The tests should run automatically
when your device restarts.
Manage passwords
In the password keeper, click a password. Click one of
the following menu items:
•
•
•
View
Edit
In the device options, click Security Options. Click
General Settings. Click the trackwheel. Click Verify
Security Software.
Delete
Related topic
Change the password keeper password (See page 86.)
Related topic
About security self tests (See page 86.)
Change the password keeper
password
Clear the device
1. In the password keeper, type your current
password keeper password.
Warning:
2. Click OK.
This procedure stops all services and removes all data,
including passwords and encryption keys, from the
BlackBerry® device. Before you clear your device, verify
that a backup copy of your data is available.
3. Click the trackwheel.
4. Click Change password.
86
27: Security
1. In the device options, click Security Options.
2. Click General Settings.
3. Click the trackwheel.
6. Type blackberry.
Related topic
How do I restore my device after clearing it? (See page
131.)
Set owner information
In the device options, click Owner. Type your contact
information. Click the trackwheel. Click Save.
Note:
Owner information appears on the screen when you
lock your BlackBerry® device.
87
User Guide
88
28
About permissions for third-party
programs
You can set whether third-party programs on your
BlackBerry® device can use data or connections from
other programs. For example, a third-party program
might use data from personal information
management (PIM) programs or connections from
programs such as the phone.
Control external connections
Control connections with the device
Control access to personal information
Security — frequently asked questions
On the Permissions screen, if you set a permission field
to Allow, you are granting third-party programs access
to that program or connection.
About firewall settings
device, the firewall option is designed to prevent these
programs from transmitting data without your
knowledge.
If you set a permission field to Prompt, you are
prompted whenever a third-party program requests
access to that program or connection.
If you set a permission field to Deny, access to that
program or connection by third-party programs is
designed to be blocked.
Related topic
Legal notice (See page 135.)
If programs or connections within a group have
different permission values, the permission field for
the group is Custom.
Prevent third-party programs from
transmitting data
When a third-party program on your BlackBerry®
device attempts to transmit data, a dialog box
appears. Accept or deny the connection request.
Related topic
About firewall settings (See page 89.)
To reset the firewall settings, in the device options,
trackwheel. Click Reset Settings.
Related topics
About firewall settings (See page 89.)
Legal notice (See page 135.)
User Guide
If your device is integrated with an account that uses
settings described. Contact your system administrator
for more information.
Set permissions for third-party
programs
Warning:
Setting permissions for third party programs can
significantly affect the operation of third-party
programs on your BlackBerry® device. If you are
unsure about how changing these settings might
affect the operation of third party programs on your
device, contact your system administrator or service
provider for more information.
Related topics
About permissions for third-party programs (See page
89.)
Control external connections (See page 90.)
Control connections with the device (See page 91.)
Control access to personal information (See page 91.)
About firewall settings (See page 89.)
1. In the device options, click Advanced Options.
2. Click Applications.
3. Click the trackwheel.
4. Click Permissions.
Control external connections
1. In the device options, click Advanced Options.
2. Click Applications.
5. Perform one of the following actions:
•
•
•
To control whether third-party programs can
make an external connection from your
device, set the Connections group permission
field.
3. Click the trackwheel.
4. Click Permissions.
To control whether third-party programs can
communicate with other programs on your
device, set the Interactions group permission
field.
5. In the Connections group, set the following fields:
•
•
To control whether third-party programs can
use physical connections to your BlackBerry®
device, such as a USB cable or RS-232 cable,
set the USB/Serial field.
To control whether third-party programs can
access personal information from programs on
your device, set the User Data group
permission field.
To control whether third-party programs can
use wireless connections that your device has
established with other Bluetooth™-enabled
devices, set the Bluetooth field.
6. Click the trackwheel.
7. Click Save.
•
•
•
To control whether third-party programs can
make phone calls or access call logs, set the
Phone field.
8. Click Reset Now.
Notes:
To control whether third-party programs can
use the GPS postion of your device, set the
Location (GPS) field.
To expand a folder, click a folder with a plus sign (+)
beside it. Click Expand.
To collapse a folder, click a folder with a minus sign (-)
beside it. Click Collapse.
To control whether third-party programs can
access the Internet or your corporate intranet
90
28: Third-party program control
through your corporation’s network, set the
Company Network field.
Related topics
Set permissions for third-party programs (See page
90.)
•
access the Internet through your service
Control external connections (See page 90.)
Control access to personal information (See page 91.)
Related topics
Set permissions for third-party programs (See page
90.)
Control access to personal
information
Control connections with the device (See page 91.)
Control access to personal information (See page 91.)
1. In the device options, click Advanced Options.
2. Click Applications.
3. Click the trackwheel.
Control connections with the device
1. In the device options, click Advanced Options.
2. Click Applications.
4. Click Permissions.
5. In the User Data group, set the following fields:
•
To control whether third-party programs can
access email messages, SMS messages, or PIN
messages, set the Email field.
3. Click the trackwheel.
4. Click Permissions.
•
To control whether third-party programs can
access personal information management
(PIM) items, such as tasks, memos, contacts,
and calendar entries, set the PIM field.
5. In the Interactions group, set the following fields:
•
To control whether third-party programs can
communicate with other programs on your
BlackBerry® device, such as the device
runtime store, persistent store, and global e
vents, set the Interprocess Communications
field.
•
•
To control whether third-party programs can
access the key store, set the Keystore field. If
you allow third-party programs to access the
key store, you must type the key store
password when a third-party program
attempts to access private contents of the key
store.
•
•
•
To control whether third-party programs can
simulate actions, such as the pressing of a key
or button on your device, and send those
simulated actions to the program that you are
currently using, set the Event Injection field.
access the key store with password caching
turned on, set the Keystore Medium Security
field.
To control whether third-party programs can
register a filter with the browser to handle
content from a domain such as a custom-
encoded document, set the Browser Filters
field.
Related topics
Set permissions for third-party programs (See page
90.)
To control whether third-party programs can
be used by your device as a source for
Control external connections (See page 90.)
customized themes, set the Theme Data field.
Control connections with the device (See page 91.)
91
User Guide
92
29
About BrickBreaker
•
•
Bomb destroys the next brick that you hit and
damages nearby bricks.
BrickBreaker scoring
Life gives you an additional life.
How do I set the speed of the paddle?
How do I accelerate the paddle?
Can I change the volume for the game?
BrickBreaker scoring
•
•
•
•
•
Catching a capsule: 50 points
Can I submit my scores to the BrickBreaker high score
web site?
Shooting a brick with the gun: 50 points
Hitting a brick with the ball: 10 points
Shooting a brick with the laser: 5 points
Damaging a brick with a bomb: 5 points
How do I check the BrickBreaker high score web site?
Why are the bricks descending?
About BrickBreaker
How do I set the speed of the
paddle?
The object of this game is to destroy bricks using a
paddle and a ball. To move the paddle, roll the
trackwheel. To release the ball when in catch mode, or
to shoot the laser or gun, press the Space key.
In the BrickBreaker options, set the Paddle Movement
Speed field.
During the game, the following capsules fall from the
bricks that you destroy:
How do I accelerate the paddle?
To accelerate the paddle as you roll the trackwheel, in
the BrickBreaker options, select the Paddle
Acceleration check box.
•
•
•
Long makes the paddle longer.
Slow slows down the speed of the ball.
Gun enables you to shoot three bullets at the
bricks. A bullet can destroy unbreakable bricks.
Can I change the volume for the
game?
•
Laser enables you to shoot unlimited laser beams
at the bricks.
•
•
•
•
Multi puts four balls in play.
Yes. In the BrickBreaker options, set the Volume field.
Catch enables you to catch and hold the ball.
Flip changes the direction of the paddle.
Wrap enables you to move the paddle beyond the
edge of the screen.
User Guide
Can I submit my scores to the
BrickBreaker high score web site?
Yes. In the BrickBreaker options, type a user name and
password. If you beat your previous high score, you
can submit your name and score to the public high
score web site. Unsubmitted high scores can be
submitted at any time. In BrickBreaker, click the
trackwheel. Click Send High Score.
How do I check the BrickBreaker
high score web site?
In BrickBreaker, click the trackwheel. Click High
Scores.
Why are the bricks descending?
After you hit the ball with your paddle 50 times on
any level, the bricks descend one space every few
seconds.
94
30
Service books
About service books
Manage service books
Receive new service books
Accept new service books
Manage service books
In the device options, click Advanced Options. Click
Service Book. Click a service book. Click one of the
following menu items:
•
•
View
Restore deleted service books
Delete
About service books
Restore deleted service books
Service books determine which services are available
on your BlackBerry® device. If your device is
In the device options, click Advanced Options. Click
Service Book. Click the trackwheel. Click Undelete.
integrated with an account that uses the BlackBerry
Enterprise Server™, your system administrator can
send service books to your device that determine
whether features such as remote address lookup and
wireless calendar synchronization are available.
Receive new service books
Service books arrive on your BlackBerry® device in one
of the following ways:
•
over the wireless network from your service
provider or system administrator
•
through the BlackBerry Desktop Software when
you connect your device to your computer
Accept new service books
Service books should be accepted automatically by
your BlackBerry® device. If a new service book is
available and it is not accepted automatically, a book
icon appears in the device status section of the screen.
To accept the service book manually, in the device
options, click Advanced Options. Click Service Book.
Click the new service book. Click Accept.
User Guide
96
31
Typing — frequently asked questions
Browser — frequently asked questions
Contacts — frequently asked questions
Tasks — frequently asked questions
Alarm — frequently asked questions
Bluetooth — frequently asked questions
Network coverage — frequently asked questions
Security — frequently asked questions
User Guide
98
32
General — frequently asked questions
Why are some of the features described not available
on my device?
Why is there a flashing light on my
The notification LED on the top of your BlackBerry®
device flashes different colors to indicate various
states.
What software version do I have on my device?
Why is there a flashing light on my device?
Why does my device screen turn off?
A green light indicates that you are in a wireless
coverage area.
Can I determine how much memory each database on
my device is using?
A red light indicates that a new message has arrived
and your current profile is set to notify you using the
LED.
Why are some of the features
described not available on my
device?
Depending on your service provider plan or the type of
account that you are using, some features might not
be available on your BlackBerry® device. Also, your
device might not have been provisioned for certain
features by your system administrator. Contact your
system administrator or service provider for more
information.
An amber light indicates that the battery is low.
A blue light indicates that your device is connected to
a Bluetooth®-enabled device.
Why does my device screen turn off?
When your BlackBerry® device is not used for a period
of time, the screen turns off to conserve battery power.
To turn the screen on again, roll the trackwheel or
press a key.
What software version do I have on
my device?
To view BlackBerry® device information such as your
device type, software version, and copyright
information, in the device options, click About. To
return to the device options, press the Escape button
twice.
Can I determine how much memory
each database on my device is
using?
Yes. In the device options, click Status. Click the
trackwheel. Click Database Sizes. The Database Sizes
screen displays the number of entries and the amount
of memory used by each database that is synchronized
with your BlackBerry® device.
User Guide
100
33
Why can I not make calls?
Why am I no longer receiving calls?
Verify that you are in a wireless coverage area and
Why am I no longer receiving calls?
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
locked?
Can I make three-way calls?
If you still cannot receive calls, verify that call
forwarding is turned off.
forwarded?
The BlackBerry® device is designed to enable you to
make emergency calls when your device or keyboard is
locked.
Can I use a TTY device with my device?
locked?
numbers?
See “Make emergency calls” on page 9 for more
information on emergency calls.
If your device is integrated with a corporate email
account, you might be able to make other phone calls
when your device is locked. Contact your system
administrator for more information.
How do I stop my device from answering or ending
calls automatically?
How do I hide my phone number in the phone?
If you receive a call when the keyboard is locked, the
keyboard unlocks when you answer the call.
Why isn’t the ring tone being played the number of
times that I have set?
If you receive a call when the device is password
locked, you can answer the call, but your device
remains password locked during the call. You can
perform regular phone actions, such as mute and hold.
When you end the call, the device remains password
locked.
Why can I not make calls?
Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
Can I make three-way calls?
Yes, if you subscribe to a three-way call service.
Contact your service provider for more information.
User Guide
Note:
Can I use call forwarding?
If a call log screen appears on your BlackBerry®
device, the Phone List View field does not change the
view of the call log screen.
Yes, if your service provider plan includes call
forwarding and your BlackBerry® device is provisioned
for the service. Contact your service provider for more
information.
How do I stop my device from
answering or ending calls
automatically?
If you use a holster with your BlackBerry® device, you
can set how calls are handled when you insert or
remove your device from the holster.
How do I edit the phone number to
which my calls are forwarded?
To edit a call forwarding phone number that you have
added, delete the current phone number and type a
new phone number.
To stop your device from answering calls automatically
when you remove it from the holster, in the phone
options, click General Options. Set the Auto Answer
Calls field to No.
Can I use a TTY device with my
device?
Yes, if your service provider supports TTY devices. The
TTY device must operate at 45.45 bits per second, and
you must insert the TTY device connector into your
BlackBerry® device headset jack. If you use an RJ-11
connector, you must use an adapter to connect the
TTY device to your device.
To stop your device from ending calls automatically
when you insert it in the holster, in the phone options,
click General Options. Set the Auto End Calls field to
No.
How do I hide my phone number in
the phone?
TTY is only available on some BlackBerry devices.
In the phone options, click General Options. Set the
How do I hide my device phone
number from a contact when making
a call?
Show “My Number” field to No.
In the phone options, click General Options. Set the
Restrict My Identity field to Yes.
Can I set the phone to display
frequently called numbers?
Yes. You can set the phone to display a list of
frequently or recently called numbers instead of call
logs. In the phone options, click General Options. Set
the Phone List View field.
102
34
questions
To screen?
device?
Why can’t I send messages?
Why can’t I receive messages?
sent to my device?
available?
How do I create a generic filter?
Why does the letter D appear beside sent PIN
messages?
Can I stop a message from being sent?
Why are some messages already on my device?
How do I create and use links in messages?
message?
Can I file messages?
How do I stop messages that are sent from my desktop
email program from appearing on my device?
Can I change the default email account that is used
when I send messages from the main messages list?
messages list?
How do I compose an email or PIN
message from the To screen?
To compose a message from the To screen, click [Use
Once]. Click Email or PIN. Type an email address or a
PIN. Click the trackwheel. Click Continue.
messages?
How do I identify received PIN messages as high
priority?
To add multiple recipients to your message, click the
trackwheel. Click Add To, Add Cc, or Add Bcc.
Can I remove the prompt that appears before I delete
messages?
User Guide
Why can’t I send messages?
Why does the letter D appear beside
sent PIN messages?
When a PIN message has been delivered to a
BlackBerry® device, a D appears beside the check
mark in the messages list.
Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
If you send a message and you are not in a wireless
coverage area, the device sends the message when
you return to a wireless coverage area.
Can I stop a message from being
sent?
Yes, provided that you are not in a wireless coverage
area or that your BlackBerry® device is not connected
to the wireless network. If a clock icon appears beside
the message, delete the message to stop it from being
sent.
Why can’t I receive messages?
Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
If you are in a wireless coverage area and your device
is connected to the wireless network, messages should
be sent automatically, so you cannot stop the message
from being sent.
Verify that email redirection to your device is turned
on. If you are using the BlackBerry Desktop Software,
in the Redirector Settings tool, verify that the Redirect
incoming messages to your handheld check box is
selected.
Why are some messages already on
my device?
When you first receive your BlackBerry® device and
every time that you update the BlackBerry Handheld
Software, several welcome messages appear. These
messages provide information and tips for using the
device.
If your device is integrated with an account that uses
BlackBerry Enterprise Server™ version 4.0 or later, in
the messages options, click Email Settings. Verify that
the Send Email To Handheld field is set to Yes. If you
have configured specific folders to redirect email
screen, verify that the correct folders from which email
is redirected are selected.
If your device is integrated with an account that uses
BlackBerry Enterprise Server™ version 4.0 or later,
recent messages might also appear on your device
when you connect to the wireless network for the first
time. Contact your system administrator for more
information.
Verify that filters, which restrict the email messages
that are sent to your device, are not enabled.
See “Manage filters” on page 21 for more information.
Why is the menu item for sending a
message not available?
If you do not have an email address or PIN saved for
your contact, the option to send a message to that
contact does not appear. In the address book, add an
email address or a PIN number for your contact.
104
34: Email and PIN messages — frequently asked questions
If your device is not enabled for wireless email
reconciliation, your device must be integrated with an
account that uses the BlackBerry Desktop Redirector
or the BlackBerry Enterprise Server™ to file messages.
You must perform an initial email reconciliation with
the BlackBerry Desktop Software so that the folders in
your desktop email program appear on your device.
See the BlackBerry Desktop Software Online Help for
more information about configuring email
How do I create and use links in
messages?
Links appear in your messages as underlined text.
Messages can contain links to various items such as
phone numbers, web sites, and email addresses. When
you receive a message that contains a link, click the
link. In the menu, click the menu items that apply to
the type of link selected.
The BlackBerry® device should automatically
recognize most linkable items as links. To create a link
for a PIN, type pin: before typing the PIN number.
reconciliation manually.
Can I hide sent messages?
Yes. In the messages options, click General Options.
Set the Hide Sent Messages field to Yes.
Why is “More available” appearing
at the end of my message?
Long messages are sent to your BlackBerry® device in
sections. As you read the first section, the next section
should be sent to your device automatically, if you are
in a wireless coverage area. However, it might take
several seconds before your device receives the next
section.
Note:
To view sent messages, in the messages list, click the
trackwheel. Click View Folder. Click Sent Items. Click
Select Folder.
Why can’t I see a new message in
the messages list even though I
received notification?
If email messages are sent to your BlackBerry® device
from specific desktop email program folders and, in
the general messages options, you set the Hide Filed
Messages option to Yes, new messages that are sent
to your device should be filed automatically, and
might not appear in the messages list. To view all your
messages, set the Hide Filed Messages field to No.
To send only the first section of long messages to your
device, in the messages options, click General
Options. Set the Auto More field to No. The next time
that you receive a long message, “More available”
appears at the bottom. To request more of the
message, click the trackwheel. Click More. To view the
rest of the message, click More All.
Can I file messages?
Yes. If you have turned on wireless email reconciliation
for your BlackBerry® device, any messages that you
file on your device are also filed in your desktop email
program.
Why is there a different icon beside
some items in the messages list?
Different icons are used in the messages list to
indicate message status, saved web pages, call logs,
messages with attachments, and so on. See the
printed documentation that accompanied your
BlackBerry® device for more information about
message status indicators.
105
User Guide
If you have turned on wireless email reconciliation,
messages that you delete in your desktop email
program are also deleted on your device. Messages
that you delete on your device are also deleted in your
desktop email program.
Why are call logs appearing in the
messages list?
When you make or receive a call, the BlackBerry®
device creates a call log that contains information
about the call. To stop call logs from appearing in the
messages list, in the phone options, click Call
Logging. Set the Show These Call Log Types In
Message List field to None.
If you deleted multiple messages using Delete Prior,
the messages are only deleted from your device.
How do I change how long messages
and phone call logs remain in the
messages list?
To change the number of days that your BlackBerry®
device keeps messages and call logs in the messages
list, in the message options, click General Options. Set
the Keep Messages field.
How do I show more of a subject line
for my messages?
To show more of the subject line for your messages,
you can hide the time that the message was received
and the name of the sender or recipient of the
message. In the messages options, click General
Options. Set the Display Time and Display Name
fields to No.
Messages that are sent to your device that are older
than the number of days that you specify in the Keep
Messages field are deleted from your device. The
messages can be restored, however, if you set the
Keep Messages field to a longer period of time. When
you increase the amount of time in this field, any
messages that are sent to your device during that
period of time appear in the messages list.
How do I identify received PIN
messages as high priority?
In the messages options, click General Options. Set
the Make PIN Messages Level 1 field to Yes.
Can I remove the prompt that
messages that are sent to my
device?
You can create filters to send only specific email
messages to your BlackBerry® device.
appears before I delete messages?
Yes. In the messages options, click General Options.
Set the Confirm Delete option to No.
See “Create filters” on page 20 for more information.
Why were some of my messages
deleted from the device?
If your BlackBerry® device memory is full, your device
deletes the oldest messages from the messages list to
accommodate new ones. It does not delete saved
messages.
To stop messages that do not meet any filter criteria
from being sent to your device, in the message
options, click Email Filters. Set the If no filters apply,
send email to handheld field to No.
106
34: Email and PIN messages — frequently asked questions
How do I create a generic filter?
How do I make changes to the
folders on my device?
You cannot add, edit, or delete folders from your
BlackBerry® device. To add, edit, or delete a folder,
change it in your desktop email program and reconcile
your email messages with your device.
To create a generic filter, use an asterisk (*) when
specifying the contacts to which the filter applies. In
the messages options, click Email Filters. In the From
field, specify part of the sender's address and use an
asterisk (*) in place of the remaining part.
If your device is enabled for wireless email
reconciliation, changes that you make to the folders in
your desktop email program should be synchronized
with your device over the wireless network.
Why are some messages sent to my
device even though I have created a
filter?
Filters must be enabled before they apply to your
messages. In the messages options, click Email Filters.
Verify that the check boxes beside all the filters that
you want to apply to your messages are enabled.
Verify that the filters are in the correct order so they
can be applied to your messages properly.
If your device is not enabled for wireless email
reconciliation, reconcile your email manually using the
BlackBerry Desktop Software. See the BlackBerry
Desktop Software Intellisync Online Help for more
information.
How do I stop email messages from
being sent to my device?
If you are using the BlackBerry Desktop Software, in
the Redirector Settings tool, clear the Redirect
incoming messages to your handheld check box.
Why can’t I specify some folders
from which email messages are
redirected?
On the Folder Redirection screen, folders with check
boxes that have broken borders are not enabled for
redirection. If your BlackBerry® device is integrated
with an account that uses BlackBerry Enterprise
Server™ version 4.0 or later, the folders should be
enabled automatically after a short period of time. To
enable all folders manually for redirection, in the
messages options, click Email Settings. Click the
trackwheel. Click Folder Redirection. On the Email
Reconciliation screen, set the Wireless Reconcile field
to Off. Save your changes. Open the Email
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later, in the messages options, click
Email Settings. Set the Send Email To Handheld field
to No.
How do I stop messages that are
sent from my desktop email program
from appearing on my device?
In the messages options, click Email Settings. Click
the trackwheel. Click Folder Redirection. Clear the
check box beside the Sent Items folder.
Reconciliation screen again and set the Wireless
Reconcile field to On. Save your changes.
Can I change the default email
account that is used when I send
107
User Guide
messages from the main messages
list?
Yes. If your BlackBerry® device is integrated with more
than one email account, you might be able to set
which email account is used by default when you send
messages from the main messages list. In the device
options, click Advanced Options. Click Message
Services. Set the Messaging (CMIME) field.
108
35
SMS messages — frequently asked questions
Why can’t I send SMS messages?
Can I verify that my SMS message
has reached its recipients?
recipients?
Yes. In the device options, click SMS. Set the Delivery
Reports field to On.
thread?
When your SMS message reaches its recipient, a D
appears beside the check mark in the messages list.
Contact your service provider to find out whether this
feature is available on your network.
messages?
device?
How do I display more items in an
SMS message thread?
In the device options, click SMS. In the Number Of
Previous Items field, set the number of SMS messages
to display.
my device?
What are the Priority and Callback Number fields in
the SMS options?
How do I change how long messages and phone call
logs remain in the messages list?
Can I hide sent messages?
Yes. In the messages options, click General Options.
Set the Hide Sent Messages field to Yes.
Why can’t I send SMS messages?
Notes:
Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
If you set the Hide Sent Messages field to Yes, and
you open an SMS message that is part of a thread, the
sent messages appear in the thread.
To view all sent SMS messages, in the messages list,
click the trackwheel. Click View Folder. Click SMS
Outbox. Click Select Folder.
If you send a message and you are not in a wireless
coverage area, the device sends the message when
you return to a wireless coverage area.
If you still cannot send SMS messages, verify that your
plan supports sending and receiving SMS messages,
and verify that the destination number uses the
format your service provider requires. Contact your
service provider for more information.
User Guide
Why were some of my messages
deleted from the device?
If your BlackBerry® device memory is full, your device
deletes the oldest messages from the messages list to
accommodate new ones. It does not delete saved
messages.
Why aren’t all the SMS options
described appearing on my device?
Depending on your service provider plan, some SMS
message options might not be available on your
BlackBerry® device. Contact your service provider for
more information.
What are the Priority and Callback
Number fields in the SMS options?
The Priority field specifies the priority level for your
SMS messages.
The Callback Number field specifies the callback
number that appears in your SMS messages.
110
36
MMS messages — frequently asked questions
Can I send and receive MMS messages?
If you want your device to communicate with the
MMSC and receive MMS messages only when you are
Reception and Automatic Retrieval fields to Home
Only.
Can I specify when my device should receive MMS
messages?
Can I hide sent messages?
Can I filter unwanted MMS
messages?
Yes. In the device options, click MMS. In the Message
Filtering section, select the Reject Anonymous
Messages check box or the Reject Advertisements
check box.
presentation?
Can I view the size of my MMS messages before I send
them?
How do I change how long messages and phone call
logs remain in the messages list?
Can I configure notification for all
MMS messages?
Yes. You can set delivery reports, which notify you and
a sender when an MMS message has been received or
read. To set delivery reports, in the device options,
click MMS. In the Notifications section, set the
notification options.
Can I send and receive MMS
messages?
Yes, if your service provider plan includes MMS
messages and your BlackBerry® device is provisioned
for the service. Contact your service provider for more
information.
To set whether delivery reports are sent when they are
requested by a sender, set the Allow Delivery
Confirmation and Allow Read Confirmation options.
Can I specify when my device should
receive MMS messages?
Yes. In the device options, click MMS. To set when
your BlackBerry® device communicates with the
Multimedia Messaging Service Centre (MMSC), set the
Multimedia Reception field.
To set whether you request delivery reports when you
send MMS messages, set the Confirm Delivery and
Confirm Read options.
Can I pause, resume, or restart a
slideshow presentation?
To set when your BlackBerry device receives MMS
messages, set the Automatic Retrieval field.
Yes. In an open message, click the trackwheel. Click
Pause, Resume, or Restart.
37
Can I view file attachments on my device?
To view document and spreadsheet attachments, your
device must be integrated with an account that uses
BlackBerry Enterprise Server™ version 3.6 or later for
Microsoft® Exchange, BlackBerry Enterprise Server
version 2.2 or later for IBM® Lotus® Domino®,
BlackBerry Enterprise Server version 4.0 or later for
Novell® GroupWise®, or the BlackBerry Internet
Service™.
for file attachments?
attachments?
To view .zip, .htm, or .html attachments, your device
must be integrated with an account that uses
BlackBerry Enterprise Server version 3.6 Service Pack 1
or later for Microsoft Exchange, BlackBerry Enterprise
Server version 2.2 Service Pack 1 or later for IBM Lotus
Domino, BlackBerry Enterprise Server version 4.0 or
later for Novell GroupWise, or the BlackBerry Internet
Service.
Why can’t I view presentation slides?
Why is “More available” appearing at the end of my
file attachment?
How do I search for text in a file attachment?
What does skipped content mean?
Can I view tracked changes in document attachments?
To view image attachments, your device must be
integrated with an account that uses BlackBerry
Enterprise Server version 4.0 or later or the BlackBerry
Internet Service.
Why do some characters not appear correctly on my
device?
Contact your system administrator or service provider
for more information.
Can I view file attachments on my
device?
Yes, if attachment viewing is enabled for your
BlackBerry® device. When you receive a message with
an attachment, click the trackwheel. If Open
Attachment appears in the menu, you can view
attachments on your device. If Open Attachment does
not appear in the menu, your device might not be
enabled for attachment viewing.
How do I view password-protected
file attachments?
You can only view password-protected .pdf files. If you
receive a .pdf file that is password-protected, you must
type the password to view the file. On the attachment
screen, click the file name. Click Password. Type the
password. Click the trackwheel.
User Guide
Can I set the amount of memory that Why can’t I view presentation slides?
my device uses for file attachments?
To view a Microsoft® PowerPoint® presentation in its
original format if your BlackBerry® device must be
integrated with an account that uses BlackBerry
Enterprise Server™ version 4.1 or later.
Yes. In the open attachment, click the trackwheel.
Click Options. Set the Cache Size field.
How do I change how file
attachments are displayed?
Why is “More available” appearing
at the end of my file attachment?
Open the full content for a file attachment. Click the
Long attachments are sent to your BlackBerry® device
in sections. As you read the first section, the next
section should be sent to your device automatically, if
you are in a wireless coverage area. However, it might
take several seconds before your device receives the
next section.
trackwheel. Click Options.
To change the font for your file attachments, set the
Font Family and Font Size fields.
In document attachments, to use font sizes that reflect
those in the original document, set the Reflect
Original Font Sizes field to Yes.
To send only the first section of long attachments to
your device, in the messages options, click General
Options. Set the Auto More field to No. The next time
that you receive a long attachment, “More available”
appears at the bottom. To request more of the file
attachment, click the trackwheel. Click More. To view
the rest of the attachment, click More All.
To show a grid when viewing spreadsheet
attachments, set the Show Gridlines field to Yes.
To label spreadsheet columns with letters and label
spreadsheet rows with numbers, set the Display
Labels field.
How do I view cell contents in
spreadsheet attachments?
When you select a cell, the contents appear at the top
of the screen. If the contents are too long to see, click
the cell. Click View Cell.
How do I search for text in a file
attachment?
In the attachment, click the trackwheel. Click Find.
Type the text. Click the trackwheel.
To view the contents of all the cells in a column, click
To make the Find feature case sensitive when
the column label at the top of the screen. Click Fit.
searching, select the Case Sensitive Search check box.
To change the column size for all the columns in a
spreadsheet, click the unmarked column label in the
top left corner of the screen. Click a preferred size.
If you have not retrieved all the text for a file
attachment, a dialog box appears. To search the
remaining text in the attachment, click Yes. If the
search term is found, the content should be retrieved
automatically.
To change the default column size for all spreadsheet
attachments, in the attachment options, set the
Column Width field to Large.
To view the text on your BlackBerry® device, verify
that you are in a wireless coverage area and that your
device is connected to the wireless network. See the
printed documentation that accompanied your device
for more information about wireless coverage levels.
114
37: Attachments — frequently asked questions
What does skipped content mean?
The skipped content bar appears in a document
attachment when more content is available, but it has
not been retrieved. To retrieve skipped content, click
the skipped content bar. Click More.
Can I view tracked changes in
document attachments?
Depending on the document type, you might be able
to view tracked changes. In a document attachment,
click the trackwheel. Click Show Changes. To hide
tracked changes, click the trackwheel. Click Hide
Changes.
115
User Guide
116
38
questions
network?
If your device is integrated with an account that uses
the BlackBerry Internet Service™, and your service
provider supports wireless email reconciliation, verify
that you have turned on wireless email reconciliation
network?
desktop email program?
Can I synchronize PIM items over the
wireless network?
Yes. If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later, verify that wireless
over the wireless network?
Can I reconcile my personal folders?
synchronization is turned on in the tasks, memo,
address book, and calendar options.
Can I empty the deleted messages folder on my
computer remotely?
If your device is integrated with an account that uses
BlackBerry Enterprise Server version 2.1 or later,
calendar appointments and meetings might be the
only PIM items that can be synchronized over the
wireless network. See the BlackBerry Desktop Software
Online Help for more information about setting
wireless calendar synchronization.
Can I determine how much memory each database on
my device is using?
Can I reconcile email messages over
the wireless network?
You must be in a wireless coverage area and your
BlackBerry® device must be connected to the wireless
network for PIM items to synchronize over the wireless
network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
Yes. If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 3.6 or later for Microsoft® Exchange,
BlackBerry Enterprise Server version 2.2 or later for
IBM® Lotus® Domino®, or BlackBerry Enterprise
Server version 4.0 or later for Novell® GroupWise®,
verify that wireless email reconciliation is turned on in
the messages options.
User Guide
How do I handle conflicts between
my device and my desktop email
program?
A conflict might occur if you edit the same item on
your BlackBerry® device and in your desktop email
program before synchronization occurs.
Why do some characters in my
desktop calendar not appear
correctly after synchronization?
If you create calendar entries on your BlackBerry®
device that contain special accents or characters, and
your desktop computer does not support those accents
or characters, the characters do not appear in your
desktop calendar correctly. On your desktop computer,
verify that you have the correct default code page set
and that you have proper font support installed on
your computer. See your Microsoft® Windows® Online
Help for more information about setting the default
code page for your computer.
If you turn on wireless email reconciliation, set
whether the device or desktop email program takes
precedence when a conflict occurs. In the messages
options, click Email Reconciliation. Set the On
Conflicts field. You can set this option for each email
account that is integrated with your device.
If you turn on wireless PIM synchronization, the
information in your desktop email program should
automatically take precedence over the data on your
device when a conflict occurs. If you turn off wireless
PIM synchronization and make changes to a PIM entry
in your desktop email program and on the device, the
conflicting information on the device is replaced by
the information in your desktop email program when
you turn on wireless PIM synchronization again. If you
want to select manually how conflicts are handled,
synchronize your device using the BlackBerry Desktop
Software before you turn on wireless PIM
Why are some of my email messages
not reconciling over the wireless
network?
If you are not in a wireless coverage area, your
messages are not reconciled over the wireless network.
See the printed documentation that accompanied your
BlackBerry® device for more information about
wireless coverage levels.
If you are in a wireless coverage area and you want to
initiate email reconciliation from the device, in the
messages list, click the trackwheel. Click Reconcile
Now.
synchronization.
If you use the BlackBerry Desktop Software to turn on
wireless calendar synchronization, you can adjust the
calendar conflict resolution settings in the BlackBerry
Desktop Software. See the BlackBerry Desktop
Software Online Help for more information.
Can I reconcile my personal folders?
Yes. If you are a Microsoft® Exchange user, and you
use personal folders, you can reconcile email messages
with personal folders using the BlackBerry Desktop
Software. See the BlackBerry Desktop Software Online
Help for more information.
Note:
Even if you have turned on wireless email
reconciliation on your BlackBerry® device, you must
use the BlackBerry Desktop Software with personal
folders.
118
38: Synchronization — frequently asked questions
Can I empty the deleted messages
folder on my computer remotely?
Yes. In the messages options, click Email
Reconciliation. Click the trackwheel. Click Purge
Deleted Items. Click Yes.
To use this feature, your BlackBerry® device must be
integrated with an account that uses BlackBerry
Enterprise Server™ version 3.6 or later for Microsoft®
Exchange and wireless email reconciliation must be
turned on. Verify that you are in a wireless coverage
area and that your BlackBerry® device is connected to
the wireless network. See the printed documentation
that accompanied your device for more information
about wireless coverage levels.
119
User Guide
120
39
Why are there no browsers available
on my device?
Can I use the BlackBerry Browser?
Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
accepts?
Depending on your service provider or your theme, the
location and name for your device browsers might
change.
pages?
device?
Can I use the BlackBerry Browser?
Yes, if your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 3.5 or later for Microsoft® Exchange,
BlackBerry Enterprise Server version 2.2 or later for
IBM® Lotus® Domino®, or BlackBerry Enterprise
Server version 4.0 or later for Novell® GroupWise®.
Contact your system administrator for more
information about the BlackBerry Browser.
animated graphics?
device?
How do I change which browser opens when I click a
link in an open message?
How do I change my browser
settings?
In the browser, click the trackwheel. Click Options.
Various settings are available on the Browser
Configuration, General Properties, and Cache
Operations screens.
On my browser home page, when I hold the Escape
button, the program closes. Can I change this?
How do I set WAP Browser security options?
Note:
You might be restricted from changing your
BlackBerry® device browser settings. Contact your
system administrator for more information.
User Guide
How do I change the browser home
page?
In the browser options, click Browser Configuration.
In the Home Page Address field, change the web
page address. Save the changes.
What is the Available Offline check
box that appears when I’m adding a
bookmark?
If you select the Available Offline check box, you can
view a web page when your BlackBerry® device is not
connected to the wireless network or when you are
outside a wireless coverage area. When you view the
web page offline, it displays the information that was
current when you last viewed the bookmark online. To
change this check box, you must create the bookmark
again.
Depending on your service provider, you might not be
able to change your home page.
How do I change the type of content
that the browser accepts?
In the browser options, click Browser Configuration.
Set the Content Mode field. Save the changes.
Can I view web pages that contain
JavaScript or animated graphics?
Yes. Use the BlackBerry® Browser to view HTML web
pages that contain JavaScript™ or animated graphics.
Can I override the character set
encoding of web pages?
Yes. On a web page, click the trackwheel. Click Set
Encoding. Clear the Auto mode check box. Set the
Default Charset field. Click OK. The browser uses the
default character set to display all web pages.
To view web pages that contain JavaScript, in the
browser options, click Browser Configuration. Select
the Support JavaScript check box. Save the changes.
To view animated graphics, in the browser options,
click General Properties. Set the Repeat Animations
field. Save the changes.
How do I select images and text on a
web page?
To view web pages that contain JavaScript or
animated graphics using the BlackBerry Browser, your
BlackBerry device must be integrated with an email
account that uses BlackBerry Enterprise Server™
version 4.0 or later. Contact your system administrator
for more information.
To select text and images that are not links, on a web
page, click the trackwheel. Click Select Mode. In select
mode, you can scroll through content one line at a
time and select images. To switch your browser back
to view mode, click the trackwheel. Click View Mode.
In view mode, you can scroll through web page
content quickly and the cursor only selects links.
Note:
The BlackBerry Browser does not support some style
sheets or dynamic HTML.
122
39: Browser — frequently asked questions
Why did a web page form not
submit?
Verify that you are in a wireless coverage area and
that your BlackBerry® device is connected to the
wireless network. See the printed documentation that
accompanied your device for more information about
wireless coverage levels.
How do I set WAP Browser security
options?
To set WAP Browser security, in the device options,
click Security Options. Click WTLS (Wireless Transport
Layer Security). In the Encryption Strength field, set
the encryption level for connecting to your WAP
gateway. In the Prompt For Server Trust field, set
whether a dialog box appears when the BlackBerry®
device cannot authenticate a WTLS connection
automatically.
Can I be prompted before scripts are
run on my device?
Yes. In the browser options, click General Properties.
Select the Prompt Before Running WML Scripts
check box. You are prompted before browser scripts
are run.
How do I change which browser
opens when I click a link in an open
message?
In the device options, click Advanced Options. Click
Browser. Set the Default browser configuration field.
Save the changes.
On my browser home page, when I
hold the Escape button, the program
closes. Can I change this?
Yes. In the browser options, click General Properties.
Select the Prompt Before Closing Browser On Escape
check box. A dialog box appears before the browser
closes.
123
User Guide
124
40
Contacts — frequently asked questions
What are the User 1, User 2, User 3,
and User 4 fields on the New
Address screen?
These fields are custom fields where you can add
information about your contacts, such as spouse name
or nickname. You can set up your BlackBerry® Desktop
Software to synchronize with these custom fields in
your desktop email program.
on the New Address screen?
appear?
phone tune?
You can only synchronize the information in a custom
field with a text field in your desktop email program.
For example, you cannot add a contact’s birthday in a
custom field and synchronize it with your desktop
email program. The birthday field is a date field in
your desktop email program, not a text field.
task, or memo?
Can I remove the prompt that appears before I delete
contacts, calendar entries, tasks, or memos?
To change the field name for a custom field, when
creating or editing a contact, click the trackwheel.
Click Change Field Name.
How do I know how many contacts, calendar entries,
tasks, or memos I have saved?
See the BlackBerry Desktop Software Online Help for
more information about synchronizing custom fields
with fields in your desktop email program.
How do I add multiple contacts with
the same name to my contact list?
In the address book options, set the Allow Duplicate
Names field to Yes. Save the changes.
Why does the Add Custom Phone
Tune option not appear?
The Add Custom Phone Tune option does not appear
in the menu if a custom phone tune has already been
added for the contact. A Calls From profile exception
appears in the profiles list for contacts with a custom
phone tune.
Can I change how my contacts or
tasks display?
Yes. In the address book, tasks, or memo options, set
the Sort By field. Save the changes.
User Guide
How do I change the volume level
for the custom phone tune?
Custom phone tunes are based on the active
notification profile. When you add a custom phone
tune from the address book, the volume for the tune
matches the volume that is set in the active
notification profile. To create a custom phone tune
with a different volume level, in the profiles list, create
an exception that is based on a profile that is different
from the active profile.
Can I clear all the categories that
apply to a contact, task, or memo?
Yes. When editing the contact, task, or memo, click the
trackwheel. Click Categories. Click the trackwheel.
Click Clear Selection. Save the changes.
Can I remove the prompt that
appears before I delete contacts,
calendar entries, tasks, or memos?
Yes. In the address book, calendar, tasks, or memo
options, set the Confirm Delete option to No. Save
the changes.
How do I know how many contacts,
calendar entries, tasks, or memos I
have saved?
In the address book, calendar, tasks, or memo options,
the Number of Entries field displays how many
contacts, calendar entries, tasks, or memos are saved.
126
41
Calendar — frequently asked questions
network?
How do I expand the number of
hours that are shown in the
Lotus Notes?
calendar?
Of Day fields. Save the changes.
in the calendar?
How do I change the day of the week
that displays first when viewing the
calendar in Week view?
In the calendar options, set the First Day Of Week
field. Save the changes.
the device calendar?
How do I scroll through the calendar
in each view?
In Day view, roll the trackwheel to move through the
hours in a day. Roll the trackwheel to the top of the
screen to select a day in the navigation bar. Click the
trackwheel to view the selected day. Hold the Alt key
and roll the trackwheel to move from one day to the
next.
tasks, or memos I have saved?
reminders?
What is dismissed if I click Dismiss All in a reminder?
Can I show tasks in the device calendar?
In Week view, roll the trackwheel to move vertically
through the hours in a day. Hold the Alt key and roll
the trackwheel to move horizontally through the days
of the week.
Why do some characters in my desktop calendar not
appear correctly after synchronization?
Are there any restrictions for using
the calendar with Lotus Notes?
In Month view, roll the trackwheel to move
horizontally through the days of the month. Hold Alt
and roll the trackwheel to move vertically between
weeks.
Yes. If you are an IBM® Lotus Notes® user, you cannot
create appointments that span multiple days. Also,
you can only edit the Subject, Location, Reminder, and
Notes fields and the Mark as Private check box when
editing a recurring appointment or meeting. When
editing a recurring meeting that you created, you can
also edit the meeting participants.
In Agenda view, roll the trackwheel to move through
the appointments. Hold the Alt key and roll the
trackwheel to move through days.
User Guide
How do I change how long
appointments remain in the device
calendar?
To change the number of days that your BlackBerry®
device keeps appointments in the calendar, in the
calendar options, set the Keep Appointments field.
Appointments in your device calendar that are older
than the number of days that you specify in the Keep
Appointments field are deleted from your device. The
appointments can be restored, however, if you set the
Keep Appointments field to a longer period of time.
When you increase the amount of time in this field,
any appointments in your calendar during that period
of time appear in your device calendar.
Can I set a snooze time for task and
calendar reminders?
Yes. In the tasks or calendar options, set the Snooze
field.
What is dismissed if I click Dismiss
All in a reminder?
If Dismiss All appears in a task or calendar reminder,
more than one task or calendar reminder is available.
If you click Dismiss All, the current reminder and all
other reminders of that type are dismissed.
Can I show tasks in the device
calendar?
Yes. In the calendar options, set the Show Tasks field
to Yes. Save the changes.
128
42
Bluetooth — frequently asked questions
Bluetooth-enabled device?
more information about connecting your device to
your computer using a Bluetooth wireless connection.
computer?
How do I know when my Bluetooth
radio is on?
Bluetooth® icons appear on the Home screen if your
Bluetooth radio is on or if you are connected with
another Bluetooth-enabled device.
How do I know when my Bluetooth radio is on?
not appear?
See the printed documentation that accompanied your
device for more information about Bluetooth icons.
Can I connect to Bluetooth-enabled devices without
being prompted?
Can I prevent Bluetooth-enabled devices from
discovering my device when it is within range?
What if I can’t type a passkey on the
Bluetooth-enabled device that I want
to pair with?
If the Bluetooth®-enabled device with which you are
pairing has no screen where you can type a passkey,
the passkey might be hard-coded. Try typing 0000 in
the Enter passkey for <device name> field on your
BlackBerry® device to pair with the new Bluetooth-
enabled device.
How do I connect my BlackBerry
device with another Bluetooth-
enabled device?
Verify that your Bluetooth® radio is turned on and
that your BlackBerry® device is paired with a
Bluetooth-enabled device.
In the list of paired Bluetooth-enabled devices, click a
device. Click Connect.
Why does my list of paired
Bluetooth-enabled devices not
Verify that your Bluetooth® radio is turned on and
that you have added Bluetooth-enabled devices to the
paired Bluetooth-enabled devices list on your
BlackBerry® device.
How do I connect my BlackBerry
device with my computer?
Verify that your Bluetooth® radio is turned on and
that your BlackBerry® device is paired with your
computer.
See “Pair with another Bluetooth-enabled device” on
page 67 for more information.
In the list of paired Bluetooth-enabled devices, click
your computer. Click Connect.
User Guide
Can I connect to Bluetooth-enabled
devices without being prompted?
You can only connect to a Bluetooth®-enabled device
without being prompted if the Bluetooth-enabled
device is paired with your BlackBerry® device. In the
paired Bluetooth-enabled devices list, click a paired
Bluetooth-enabled device. Click Device Properties.
Set the Trusted field to Yes.
Can I prevent Bluetooth-enabled
devices from discovering my device
when it is within range?
Yes. In the Bluetooth® paired devices list, click the
trackwheel. Click Options. Set the Discoverable field
to No.
130
43
Security — frequently asked questions
appear when I restart my device?
How do I prevent passwords from
accidentally being copied to the
clipboard?
Clipboard Copy field to False.
copied to the clipboard?
Can I regenerate encryption keys
from my device?
device options?
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server version
4.0 or later, you can regenerate encryption keys from
the device.
How do I specify the criteria for random passwords
that are generated in the password keeper?
How do I prevent passwords from appearing on the
screen in the password keeper?
If your device is integrated with an account that uses
BlackBerry Enterprise Server version 3.6 or earlier for
Microsoft® Exchange, BlackBerry Enterprise Server
version 2.2 or earlier for IBM® Lotus® Domino®, or if
you use the BlackBerry Desktop Redirector to forward
messages to your device, update the encryption keys
using the BlackBerry Desktop Software. See the
BlackBerry Desktop Software Online Help for more
information.
Why does the Verifying Security
Software dialog box appear when I
restart my device?
When this dialog box appears, the BlackBerry® device
is verifying that all security software is implemented
properly on your device. The tests are designed to run
automatically when your device restarts.
Why do additional security features
appear in the device options?
How do I restore my device after
clearing it?
If your BlackBerry® device is integrated with an
account that uses BlackBerry Enterprise Server™
version 4.0 or later, contact your system administrator
to initiate enterprise activation.
Additional security options such as Certificate Servers,
Certificates, Key Stores, S/MIME, and Memory
Cleaning might be available. You can use these
options with the Secure Multipurpose Internet Mail
Extensions (S/MIME) Support Package. See the
S/MIME Support Package User Guide Supplement for
more information.
If you are using the BlackBerry Desktop Software,
restore device data and services using the Backup and
Restore tool. See the BlackBerry Desktop Software
Online Help for more information.
User Guide
How do I specify the criteria for
random passwords that are
generated in the password keeper?
In the password keeper options, set the password
length and specify whether randomly generated
passwords must contain letters, numbers, or symbols.
How do I prevent passwords from
appearing on the screen in the
password keeper?
In the password keeper options, set the Show
Password field to False.
132
44
Home screen shortcuts
Navigating screens shortcuts
Typing shortcuts
To hide an icon on the Home screen, select the icon.
Hold the Alt key and click the trackwheel. Click Hide
Application.
To show a hidden icon on the Home screen, hold the
Alt key and click the trackwheel. Click Show All. Hold
the Alt key and click a crossed-out icon. Click Hide
Application.
Editing text shortcuts
Phone shortcuts
To switch to another program, hold the Alt key and
press the Escape button. Continue to hold the Alt key
and select a program. Release the Alt key to switch to
that program.
Messages shortcuts
Search shortcuts
Attachments shortcuts
Browser shortcuts
Options and fields shortcuts
To select a check box, press the Space key. To clear a
Calendar shortcuts
check box, press the Space key again.
Calculator shortcuts
To change an option field, hold the Alt key. Click a
value.
Home screen shortcuts
To move to an item in a list or menu, type the first
letter of the item.
To return to the Home screen from any other screen,
press the End key.
To clear a field, click the trackwheel. Click Clear Field.
To lock the device, set a password. Hold the * key.
To unlock the device, press the Send key + the * key.
Type your password.
Navigating screens shortcuts
To move the cursor, roll the trackwheel.
To lock the keyboard, hold the * key.
To move the cursor in a different direction, hold the
Alt key and roll the trackwheel.
To unlock the keyboard, press the Send key + the *
key.
To exit a screen or dialog box, press the Escape
button.
To switch between the Default and Vibrate
notification profiles, hold the # key.
To click an icon or menu item, roll the trackwheel to
select the item. Click the trackwheel.
To move an icon on the Home screen, select the icon.
Hold the Alt key and click the trackwheel. Click Move
Application. Roll the trackwheel to move the icon.
Click the trackwheel.
To select multiple items or characters, hold the Shift
key and roll the trackwheel.
User Guide
To page up or down in a list, hold the Alt key and roll
the trackwheel.
To move to the top of a screen, press 1.
To move to the bottom of a screen, press 7.
To move down a screen, press 9.
To move up a screen, press 3.
To move to the next item, press 2.
To move to the previous item, press 8.
To delete a selected item, press the Backspace/
Delete key.
Editing text shortcuts
To move the cursor horizontally through a line of text,
hold the Alt key and roll the trackwheel.
To select a line of text, press the Shift key and roll the
trackwheel.
To select text character by character, hold the Shift
key and roll the trackwheel.
To cut the selected text, press the Shift key + the
Backspace/Delete key.
To copy the selected text, press the Alt key and click
the trackwheel.
To paste the selected text, press the Shift key and click
the trackwheel.
134
45
Legal notice
© 2005 Research In Motion Limited. All rights
reserved. The BlackBerry and RIM families of related
marks, images and symbols are the exclusive
properties and trademarks of Research In Motion
Limited. RIM, Research In Motion, 'Always On, Always
Connected' and BlackBerry are registered with the
U.S. Patent and Trademark Office and may be pending
or registered in other countries.
The handheld and/or associated software are
protected by copyright, international treaties and
various patents, including one or more of the
following U.S. patents: 6,278,442; 6,271,605;
6,219,694; 6,075,470; 6,073,318; D445,428;
D433,460; D416,256. Other patents are registered or
pending in various countries around the world. Visit
www.rim.com/patents.shtml for a current listing of
applicable patents.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by
Research In Motion Limited is under license. IBM,
Lotus, Domino, and Lotus Notes are either registered
trademarks or trademarks of International Business
Machines Corporation in the United States, other
countries, or both. JavaScript is a trademark of Sun
Microsystems, Inc. in the United States and other
countries. Microsoft, Outlook, PowerPoint, and
Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United
States and/or other countries. Novell and GroupWise
are either registered trademarks or trademarks of
Novell, Inc. in the United States and other countries.
vCard and vCalendar are either registered trademarks
or trademarks of the Internet Mail Consortium.
This document is provided “as is” and Research In
Motion Limited (RIM) assumes no responsibility for
any typographical, technical, or other inaccuracies in
this document. RIM reserves the right to periodically
change information that is contained in this
document; however, RIM makes no commitment to
provide any such changes, updates, enhancements, or
other additions to this document to you in a timely
manner or at all. RIM MAKES NO REPRESENTATIONS,
WARRANTIES, CONDITIONS, OR COVENANTS,
EITHER EXPRESS OR IMPLIED (INCLUDING WITHOUT
LIMITATION, ANY EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS OF FITNESS FOR A
PARTICULAR PURPOSE, NON-INFRINGEMENT,
MERCHANTABILITY, DURABILITY, TITLE, OR RELATED
TO THE PERFORMANCE OR NON-PERFORMANCE OF
ANY SOFTWARE REFERENCED HEREIN OR
PERFORMANCE OF ANY SERVICES REFERENCED
HEREIN). IN CONNECTION WITH YOUR USE OF THIS
DOCUMENTATION, NEITHER RIM NOR ITS
All other brands, product names, company names,
trademarks and service marks are the properties of
their respective owners.
AFFILIATED COMPANIES AND THEIR RESPECTIVE
DIRECTORS, OFFICERS, EMPLOYEES, OR
CONSULTANTS SHALL BE LIABLE TO YOU FOR ANY
DAMAGES WHATSOEVER BE THEY DIRECT,
ECONOMIC, COMMERCIAL, SPECIAL,
CONSEQUENTIAL, INCIDENTAL, EXEMPLARY, OR
User Guide
INDIRECT DAMAGES, EVEN IF RIM HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
INCLUDING WITHOUT LIMITATION, LOSS OF
BUSINESS REVENUE OR EARNINGS, LOST DATA,
DAMAGES CAUSED BY DELAYS, LOST PROFITS, OR A
FAILURE TO REALIZE EXPECTED SAVINGS.
You are solely responsible for the selection,
implementation, and performance of any third-party
applications that you use with the handheld or
desktop software. Research In Motion does not in any
way endorse or guarantee the security, compatibility,
performance, or trustworthiness of any third-party
application and shall have no liability to you or any
third-party for issues arising from such third-party
applications.
Licensed by QUALCOMM Incorporated under one or
more of the following United States Patents and/or
their counterparts in other nations:
4,901,307, 5,490,165, 5,056,109, 5,504,773,
5,101,501, 5,506,865, 5,109,390, 5,511,073,
5,228,054, 5,535,239, 5,267,261, 5,544,196,
5,267,262, 5,568,483, 5,337,338, 5,600,754,
5,414,796, 5,657,420, 5,416,797, 5,659,569,
5,710,784, 5,778,338
136
Index
A
adding, 18
opening, 35
about, Convenience key, 76
accepting
image, 46
link, 46
web page, 46
meeting invitations, 57
service books, 95
activation, enterprise, 7
adding
alarm
notification, 63
call forwarding number, 14
call notes, 13
reminders and power off, 79
setting, 63
contacts, 51
silencing, 63
contacts from attachments, 35
53
snooze, 63
turning off, 63
volume, 63
contacts to PIN messages, 18
contacts to profile exceptions, 72
contacts to SMS messages, 26
custom phone tunes, 52
appointments
changing, 56
deleting, 57
number of, 126
opening, 56
recurring, 55
scheduling, 55
meeting invitees, 57
multiple contacts to filters, 20
pauses and waits, 53
programs, 49
ring tones, 49
scheduling quickly, 56
about, 10
privacy, 10
turning on, 10
attachments
See also creating
address book
custom fields, 125
searching remote, 53
sharing with Bluetooth-enabled device, 68
updating contacts from attachments, 35
See also contacts
adding contacts from, 35
MMS messages, 27
opening, 33
shortcuts, 35
updating contacts from, 35
address book attachments
about, 33, 35
User Guide
attachments; images
auto signature
paired devices list, 129
radio, 67
about, 19
radio icon, 129
adding, 19
automatic volume control
about, 14
setting, 14
AutoText
bookmarks
about, 41
adding folders, 48
available offline, 122
changing, 47
creating, 47
deleting, 47
creating entries, 42
editing entries, 42
example, 41
inserting macros, 44
specified case and smartcase, 42
turning off for SMS messages, 42
using, 42
moving, 48
organizing, 48
BrickBreaker
viewing entries, 42
available features, 99
object, 93
playing, 93
B
scoring, 93
backlight
submitting scores, 94
volume, 93
configuring, 75
browser
backup
about, 45
about, 39
clearing cache, 48
closing, 46
controlling scripts, 123
frequently asked questions, 121
hiding, 46
battery
about, 79
extending life, 79
level, 79
Bluetooth
about, 67
about pairings, 67
accessing address book, 68
connecting with another Bluetooth-enabled
device, 129
connecting with your computer, 129
discoverable, 68
editing paired device name, 68
encryption, 68
home page, 46
JavaScript support, 122
navigating, 45
requirements for using, 121
selecting content, 45, 122
sending images, 46
sending links, 46
sending web page addresses, 47
shortcuts, 48
frequently asked questions, 129
138
viewing files in, 47
viewing history, 46
viewing images, 46
See also web pages
viewing specific date, 55
viewing week, 55
setting, 13
browser push
about, 49
notification options, 50
turning on, 50
about, 13
adding notes, 13
deleting notes, 13
editing notes, 13
forwarding notes, 13
setting, 13
C
cache, browser, 48
calculator
converting measurements, 65
copying calculation, 65
memory, 65
using, 13
shortcuts, 65
calendar
alternating between, 12
answering, 11
about, 55
changing views, 55
emergency, 9
emergency callback mode, 11
ending, 9, 11
ignoring, 11
logging, 13
making, 9
making using speed dial, 11
muting, 12
resetting timers, 16
smart dialing, 14
TTY, 15
default view, 55
dismissing all reminders, 128
expanding hours shown, 127
navigating, 127
setting notification for, 71
shortcuts, 57
showing tasks in, 128
snooze, 128
voice privacy, 15
See also phone
synchronizing, 37
today, 55
vCalendar attachments, 28
viewing agenda, 55
viewing day, 55
categories
about, 52
applying, 53
clearing all, 126
viewing month, 55
viewing next or previous, 55
139
User Guide
creating, 52
deleting, 53
sorting contacts by, 53
sorting memos by, 53
sorting tasks by, 53
assigning speed dial, 12
calling, 9
changing in profile exceptions, 72
clearing all categories, 126
deleting, 51
changing
appointments, 56
bookmarks, 47
editing, 51
number of, 126
sorting, 125
synchronizing, 37
browser content type, 122
browser home page, 122
calendar views, 55
contacts in profile exceptions, 72
custom fields, 125
email messages, 18
vCard attachments, 28
viewing, 51
mailing list members, 52
meeting invitees, 57
about, 84
meetings, 56
turning on, 85
PIN messages, 18
sent messages, 18
content protection
about, 84
turning on, 85
Convenience key
task status, 59
about, 76
setting, 76
checking voice mail, 11
clearing
calculation, 65
all categories, 126
text, 41
browser cache, 48
device data, 86
creating
fields, 133
compressing data size, 85
connecting, to wireless network, 81
contacts
adding, 51
AutoText entries, 42
bookmarks, 47
categories, 52
email messages, 17
filters, 20
adding custom phone tunes, 52
adding to email messages, 18
adding to PIN messages, 18
adding to SMS messages, 26
allowing duplicate, 125
140
filters quickly, 21
links, 105
meetings, 57
memos, 61
MMS messages, 28
multiple messages, 19
over the wireless network, 37
PIN messages, 23
mailing lists, 51
profile exceptions, 72
profiles, 71
SMS messages, 25
tasks, 59
prior messages, 19
profile exceptions, 72
profiles, 71
See also adding
saved searches, 31
service books, 95
speed dial numbers, 13
tasks, 59
custom fields, 125
phone tunes
about, 52
themes, 76
adding, 52
mute, 73
volume, 126
third-party programs, 49
using email reconciliation, 37
See also removing
See also profile exceptions; custom notification
customizing, See setting
cutting text, 41
delivery confirmation
for PIN messages, 104
for SMS messages, 109
desktop email program
conflicts, 118
D
default
profiles, 71
deleting
device
activating over wireless network, 7
backing up data, 39
changing folders on, 107
resetting, 80
restoring, 39
silencing, 73
unlocking, 84
appointments, 57
AutoText entries, 42
bookmarks, 47
call notes, 13
categories, 53
contacts, 51
downloaded ring tones, 71
email messages, 18
filters, 21
device data
backed up during wireless backup, 39
clearing, 86
reducing size, 85
restoring, 131
images, 47
mailing lists, 51
device password
141
User Guide
about, 83
changing, 84
adding contacts, 18
adding signature, 19
changing, 18
turning off, 84
deleting, 18
dialing
filing, 18
adding pause, 53
filtering, 106
adding wait, 53
forwarding, 18
using letters, 12
frequently asked questions, 103
opening, 17
replying, 18
resending, 18
resending automatically, 18
restricting, 106
saving, 18
saving draft, 18
sending, 17
stop from sending, 104
viewing filed, 19
viewing longer subject line, 106
See also messages
See also calls; phone
calendar reminders, 128
task reminders, 128
display
language, 77
options, 75
downloading
images, 76
previewing ring tones, 50
programs, 49
ring tones, 49
themes, 76
email reconciliation
about, 37
E
deleted messages, 37
handling conflicts, 118
over the wireless network, 37
frequently asked questions, 104
emergency
callback mode, 11
making calls, 9
encryption keys
editing
AutoText entries, 42
call notes, 13
contacts, 51
filters, 21
mailing lists, 51
memos, 61
profiles, 71
saved searches, 31
shortcuts, 134
about, 85
speed dial numbers, 13
task status, 59
See also setting; changing
email messages
regenerating, 85
requirements for regenerating from device, 131
ending, calls, 9, 11
enterprise activation, 7
142
escalating volume, 73
extending battery life, 79
adding for bookmarks, 48
available for email redirection, 107
changing, 107
F
file attachments
about, 33
collapsing, 18, 48
expanding, 18, 48
changing display of, 114
frequently asked questions, 113
memory use for, 114
navigating, 35
opening, 33
opening table of contents, 33
requirements for viewing, 113
retrieving embedded content, 33
searching within, 114
skipped content, 115
viewing in the browser, 47
viewing spreadsheet cells, 114
attachments; images
filters
call notes, 13
calls, 13
email messages, 18
MMS messages, 28
PIN messages, 23
SMS messages, 26
frequently asked questions
alarm, 63
Bluetooth, 129
browser, 121
calendar, 127
contacts, 125
downloading, 50
email messages, 103
filters, 107
general, 99
memos, 61
MMS messages, 111
network, 81
phone, 101
profiles, 73
programs, 50
security, 131
about, 20
adding multiple contacts, 20
based on sender, 21
creating, 20
creating generic, 107
creating quickly, 21
managing, 21
order of, 20
finding
MMS number, 27
phone number, 9
PIN, 23
SMS number, 25
SMS messages, 109
synchronization, 117
tasks, 59
software version, 99
typing, 43
143
User Guide
full content, opening, 33
J
JavaScript support, 122
G
getting started, 7
H
hiding
browser, 46
phone number, 102
programs, 133
language
adding, 77
removing, 77
sent messages, 105
tracked changes in attachments, 115
home page, viewing, 46
setting, 77
flashing, 99
I
ignoring calls, 11
address, 46
images
copying addresses, 46
creating, 105
sending from browser, 46
using, 105
address, 46
deleting, 47
downloading, 76
navigating, 46
location-based services
about, 10
opening, 47
panning, 34, 46
rotating, 34, 46
privacy, 10
selecting, 45, 122
locking
device, 84
keyboard, 84
sending from browser, 46
viewing in browser, 46
zooming, 34, 46
See also file attachments; address book
attachments; attachments
importance, setting, 18
increasing detail in images, 34
inserting macros in AutoText entries, 44
invitation, responding to, 57
mailing lists
adding members, 52
changing members, 52
creating, 51
deleting, 51
deleting members, 52
editing, 51
144
viewing, 51
viewing members, 52
making
preloaded on device, 104
resending, 18
calls, 9
emergency calls, 9
three-way calls, 12
meetings
searching, 31
searching by recipient, 32
searching by sender, 32
searching by service, 31
searching by subject, 32
sending images in, 46
sending links in, 46
shortcuts, 21
changing, 56
changing attendees, 57
deleting, 57
inviting attendees, 57
number of, 126
opening, 56
recurring, 56
removing attendees, 57
requirements for creating, 117
responding to invitations, 57
scheduling, 56
stop forwarding, 107
MMS messages
about, 27
attachments, 27
deleting, 28
filtering, 111
forwarding, 28
opening, 27
options, 111
presentations, 111
replying, 28
retrieving, 27
saving, 28
sending from browser, 28
vCard attachments, 28
viewing, 27
viewing size, 112
See also messages
memory
database sizes, 99
memos
clearing all categories, 126
creating categories, 52
deleting, 61
editing, 61
number of, 126
synchronizing, 37
viewing, 61
writing, 61
messages
changing, 18
deleting, 106, 110
deleting multiple, 19
different icons, 105
filing, 105
hiding sent, 105
marking opened, 19
marking unopened, 19
moving
bookmarks, 48
icons on Home screen, 133
145
User Guide
message filter position, 21
profile exceptions, 72
order, of filters, 20
organizing bookmarks, 48
about, 20
setting, 20
muting calls, 12
turning off automatically, 20
N
navigating
P
browser, 45
password keeper
calendar, 127
file attachments, 35
images, 46
presentations, 35
shortcuts, 133
about, 85
options, 132
notification
passwords
for browser push, 50
for voice privacy, 16
turning off, 73
See also profiles
numbers
copying, 86
criteria for random passwords, 132
editing in password keeper, 86
storing, 85
finding MMS, 27
finding phone, 9
finding PIN, 23
finding SMS, 25
viewing in password keeper, 86
pause
O
about, 53
adding, 53
phone
opening
appointments, 56
email messages, 17
file attachments, 33
images, 47
A-GPS support, 10
alternate between calls, 12
assigning speed dial, 12
automatic volume control, 14
Bluetooth, 68
messages from different accounts, 17
MMS messages, 27
PIN messages, 17
SMS messages, 25
tasks, 59
call waiting, 11, 12
calling corporations, 15
checking voice mail, 11
dialing using letters, 12
emergency callback mode, 11
See also viewing; showing
146
finding number, 9
forwarding calls, 13
hiding phone number, 102
restricting identity, 102
shortcuts, 16
viewing, 34
privacy
for calls, 15
profile exceptions
about, 72
smart dialing, 14
TTY, 15
creating, 72
deleting, 72
editing, 72
moving, 72
turning off, 72
turning on, 72
voice mail, 15
volume, 12
See also calls
phone calls, See calls
pictures, navigating, 46
PIN messages
profiles
about, 71
alarm, 63
creating, 71
deleting, 71
about, 23
changing, 18
deleting, 23
forwarding, 23
opening, 17
replying, 23
saving, 23
editing, 71
enabling, 71
escalating volume, 73
frequently asked questions, 73
programs
adding, 49
deleting, 49
sending, 23
downloading, 49
loading, 50
switching between, 133
third-party and data transmissions, 89
viewing details, 49
viewing list, 49
viewing longer subject line, 106
See also messages
PIN, finding, 23
power
about, 79
turning off, 79
See also third-party programs
protecting, device content, 85
turning off automatically, 79
turning on automatically, 79
presentations
R
MMS messages, 111
navigating, 35
recalling saved searches, 31
147
User Guide
recipient, searching by, 32
recurring meetings, See meetings
reducing data size, 85
reminders
restoring
about, 39
device, 131
device data, 39
adding, 49
downloading, 49
listening, 71
previewing, 50
showing, 71
calendar, 56, 128
dismissing all, 128
power off, 79
tasks, 59, 128
removing
testing, 71
See also profiles
display language, 77
meeting invitees, 57
See also deleting
draft email messages, 18
email messages, 18
images, 47
replying
email messages, 18
MMS messages, 28
PIN messages, 23
searches, 31
MMS messages, 28
PIN messages, 23
SMS messages, 26
sent email messages, 19
SMS messages, 26
web page requests, 47
web pages, 47
requirements
browser, 121
call forwarding, 102
email reconciliation, 117
filing messages, 105
three-way calls, 101
TTY, 102
scheduling
appointments, 55
meetings, 56
resending
home screen background, 75
options, 75
power save mode, 99
turning on, 75
email messages, 18
pending PIN messages, 18
PIN messages, 18
scrolling
horizontally in attachments, 35
in opposite direction, 133
through calendar views, 127
search criteria, setting, 31
searches
SMS messages, 26
resetting
call timers, 16
device, 80
deleting saved, 31
148
recalling saved, 31
saving, 31
viewing last, 32
viewing saved, 31
verifying software, 86
WTLS, 48
creating filters using, 21
searching by, 32
sending
searching
about, 31
address book attachments, 18
email messages, 17
images in messages, 46
links in messages, 46
MMS messages, 27
PIN messages, 23
by recipient, 32
by sender, 32
by service, 31
by subject, 32
remote address book, 53
shortcuts, 32
within attachments, 114
security
additional features, 131
certificate servers, 131
certificates, 131
content compression, 84
content protection, 84
encryption keys, 85
firewall settings, 89
frequently asked questions, 131
key stores, 131
locking device, 84
memory cleaning, 131
password keeper, 85
permissions for third-party programs, 90
S/MIME, 131
self tests, 86, 131
setting third-party program permissions, 89
storing passwords, 85
third-party programs accessing connections with
the device, 91
third-party programs accessing external
connections, 90
third-party programs accessing personal
information, 91
third-party programs transmitting data, 89
turning off device password, 84
hiding, 105
hiding SMS, 109
saving, 19
viewing, 19
service books
about, 95
accepting, 95
deleting, 95
receiving, 95
restoring deleted, 95
viewing, 95
service, searching by, 31
alarm, 63
alarm volume, 63
cursor speed, 43
device password, 83
folder redirection, 21
font, 76
home screen background, 75
importance level of messages, 18
language, 77
out-of-office reply from device, 20
149
User Guide
theme, 76
TTY, 15
finding number, 25
forwarding, 26
hiding sent, 109
voice mail options, 15
WTLS, 123
opening, 25
options, 110
See also editing; changing
shortcuts
removing history, 26
resending, 26
for attachments, 35
for calculator, 65
for calendar, 57
for clearing fields, 133
for editing text, 134
for messages, 21
for navigating screens, 133
for searching, 32
for typing, 43
saving, 26
sending, 25
turning off AutoText, 42
typing SMS numbers, 25
See also messages
setting for calendar, 128
setting for tasks, 128
using for alarm, 63
sounds, See profiles
speakerphone
for using the browser, 48
using on Home screen, 133
showing
programs, 133
tracked changes, 115
See also viewing
assigning to contacts, 12
deleting, 13
editing, 13
moving contacts, 13
using, 11
silencing
alarm, 63
device, 73
size, database, 99
skipped content, 115
smart dialing
viewing list, 13
about, 14
creating filters using, 21
searching by, 32
viewing more of, 106
SureType
default country code, 14
smartcase, definition, 42
SMS messages
shortcuts, 43
about, 25
typing, 41
using word list, 41
switching programs, 133
adding contacts, 26
deleting, 26
delivery confirmation, 109
150
synchronization
permissions, 90
personal information, 91
setting permissions for, 89
synchronizing
calendar, 37
contacts, 37
three-way calls
making, 12
memos, 37
messages, See email reconciliation
tasks, 37
TTY
about, 15
T
requirements for using, 102
setting, 15
task switcher, 133
tasks
applying categories, 53
changing status of, 59
clearing all categories, 126
creating, 59
deleting, 59
deleting categories, 53
number of, 126
alarm, 63
all notification, 73
Bluetooth radio, 67
device automatically, 79
device password, 84
filters, 21
profile exceptions, 72
opening, 59
setting notification for, 71
snooze, 128
A-GPS support, 10
alarm snooze, 63
Bluetooth radio, 67
browser push, 50
content compression, 85
content protection, 85
device password, 83
device screen, 75
text
pasting, 41
text telephone, See TTY
theme
filters, 21
speakerphone during calls, 12
tasks snooze, 128
about, 76
deleting, 76
downloading, 76
wireless email reconciliation, 37
wireless PIM synchronization, 38
typing
setting, 76
third-party programs
connections on the device, 91
data transmissions, 89
copy text, 41
151
User Guide
cut text, 41
specific date in calendar, 55
speed dial list, 13
spreadsheets, 34
table of contents of file attachments, 33
See also opening; showing
NUM lock, 43
passwords, 83
paste text, 41
setting cursor speed, 43
shortcuts, 43
SMS numbers, 25
text, 41
using SureType, 41
using word list, 41
voice mail
checking, 11
voice privacy
about, 15
adjusting for phone, 12
alarm, 63
U
controlling automatically, 14
escalating, 73
unlocking
device, 84
keyboard, 84
user-defined fields, 125
setting default for calls, 15
V
about, 53
adding, 53
web pages
viewing
animated graphics, 122
AutoText entries, 42
contacts, 51
filters, 21
address, 46
animated graphics, 122
canceling requests, 46
copying addresses, 46
opening, 45
refreshing, 46
saving, 47
saving requests, 47
select mode, 45, 122
sending addresses, 47
showing placeholders, 46
submitting forms, 123
view mode, 45, 122
viewing files from, 47
viewing home page, 46
viewing images, 46
viewing next and previous, 46
images, 46
list of programs, 49
mailing lists, 51
memos, 61
MMS messages, 27
password keeper passwords, 86
presentations, 34
program details, 49
saved searches, 31
sent items, 19
service books, 95
size of MMS messages, 112
152
See also browser
wireless
requirements, 117
turning on, 38
backup, 39
email reconciliation, 37
PIM synchronization, 38
restore, 39
about, 41
navigating, 41
WTLS
wireless network
about, 48
setting, 123
disconnecting from, 81
frequently asked questions, 81
registering with, 81
selecting, 81
Z
zooming images, 46
wireless PIM synchronization
about, 38
153
User Guide
154
|