COMPACT DISC PLAYER
AM/FM STEREO CASSETTE RECORDER
WITH DETACHABLE SPEAKERS
MODEL CD-1493
OPERATING INSTRUCTIONS
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES AM/FM STEREO BROADCASTS
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE
DETACHABLE SPEAKER SYSTEM
2 WAY POWER - AC/DC
REQUIRES 8 SIZE “C” BATTERIES
•
•
•
•
•
•
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD1493(AD-63E)-WM-E-030404
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
“dangerous voltage” within
the product’s enclosure that
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.
(OR
BACK).
NO
USER
SERVICEABLE PARTS INSIDE.
REFER
QUALIFIED
SERVICING
TO
may
be
of
sufficient
SERVICE
magnitude to constitute a risk
of electric shock to persons.
PERSONNEL.
See bottom of the set.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquid such as vases shall be placed on the apparatus.
1
IB-CD1493(AD-63E)-WM-E-030404
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CD’s.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the bottom of the set.
2
IB-CD1493(AD-63E)-WM-E-030404
BATTERY SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE
TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the type and size of batteries mentioned in the operating instructions
booklet (batteries are not included with this set, please buy the proper batteries).
2. Do not dispose the batteries into a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Be careful when handling batteries in order not to short the battery with
conducting materials such as rings, bracelets and keys. The battery or conductor
may over heat and cause burns.
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may cause burns or
irritation to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged
batteries could increase internal cell pressure and rupture the batteries.
8. When inserting batteries into this product, the proper polarity (
and
) or
direction must be observed. Reverse insertion of some or all of the batteries
may result in battery electrolyte leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during the period the batteries
could leak, damaging the product.
10. Discard weak or dead batteries as soon as possible since they are more likely
to leak in the product. Batteries should be replaced (depending on the product)
when the display gets dim or if the Low Battery Indicator shows or if the sound
gets distorted.
11. Do not store this product in high temperature areas. Batteries that are stored in
a freezer or refrigerator for the purpose of extending shelf life should be protected
from condensation during storage and defrosting. Batteries should be stabilized
at room temperature prior to use after cold storage.
12. If this product does not operate normally, see TROUBLE SHOOTING in this
instruction manual. If you can’t resolve the problem, or if the product is
damaged, refer to the LENOXX WARRANTY INFORMATION. Opening or
removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch
your skin, and discard the leaking batteries.
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).
15. The use of rechargeable batteries is not recommended for this set because
their voltage and life is lower than standard batteries.
16. Installation of batteries should be done by an adult only.
SAVE THESE INSTRUCTIONS
3
IB-CD1493(AD-63E)-WM-E-030404
LOCATION OF CONTROLS
1
2
3
26
25
4
FRONT VIEW
5
24
6
23
22
21
7
8
20
8
9
10
13
14
18
12
17
19
16 15
11
REAR VIEW
27
27
28
29
28
31
30
32
18. FUNCTION SWITCH
19. CD RANDOM BUTTON
20. PHONES JACK
1. FOLDING HANDLE
2. CD DOOR
3. COMPACT DISC DISPLAY
21. CD FORWARD SKIP/SEARCH
BUTTON
4. CD DOOR PUSH/OPEN AREA
5. AM/FM DIAL SCALE
22. CD BACKWARD SKIP/SEARCH
BUTTON
6. TUNING CONTROL
7. VOLUME CONTROL
23. CD STOP BUTTON
8. DETACHABLE SPEAKERS
24. CD PLAY/PAUSE BUTTON
25. POWER BUTTON
9. BUILT-IN CONDENSER MICROPHONE
10. BAND SWITCH
26. CD PROG./REPEAT BUTTON
27. DETACHABLE SPEAKER LOCKS
28. SPEAKER PLUGS
11. CASSETTE DOOR
12. CASSETTE PAUSE BUTTON
13. CASSETTE STOP/EJ. BUTTON
14. CASSETTE FAST FORWARD BUTTON
15. CASSETTE REWIND BUTTON
16. CASSETTE PLAY BUTTON
17. CASSETTE RECORD BUTTON
29. AC SOCKET
30. FM TELESCOPING ANTENNA
31. SPEAKER JACKS
32. BATTERY COMPARTMENT DOOR
4
IB-CD1493(AD-63E)-WM-E-030404
CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
Battery compartment
To a wall outlet
NOTE: One blade of plug
and outlet is wider.
AC SOCKET
TIP
1. Connecting the AC power
cord
If the plug of the AC
power cord does not
match your outlet, do not
force it. Reverse it and
try again. The plug is
polarized and only fits
one way into the wall
outlet and back of the
set.
•
Insert one end of the supplied AC power cord
(located in the battery compartment) into the socket
located at the rear of the player, and the other end
to the wall outlet.
2. Using the player on batteries
•
Replace the batteries
when the POWER lamp
dims or when the player
stops operating. Replace
all the batteries with new
ones. Before you replace
the batteries, be sure to
take out the CD from the
player and remember to
check the Battery Safety
Instructions on Page 3.
Insert 8 size “C” batteries (not supplied) into the
battery compartment.
To use the player on batteries, disconnect the AC
power cord both from the outlet and the back of
the player.
If the CD does not play
on batteries, this means
the batteries are almost
used up. But the radio
may continue to play on
these weak batteries
because it uses less
power than the CD player.
•
5
IB-CD1493(AD-63E)-WM-E-030404
ATTACHING THE SPEAKERS
NOTE: The right and left speakers are NOT
interchangeable. The right speaker
fits only on the right side (as shown
in FIG. 1). The left speaker fits only
on the left side.
1.Bring the right speaker to the right side
of the set.
2.Raise the right speaker box about 4
inches above the set. Align the
tracks (rails).
FIG.1
3.Fit speaker over the side rails.
4.When speaker fits over the rails, lower
the speaker as shown in FIG. 2, and make
sure the tabs snap into the speaker
box (locks in the back).
5.Repeat above steps 1 to 4 for the left
speaker box.
FIG.2
6.Carefully unwind the speaker wire from behind each speaker box and plug the
right plug into SPEAKER JACK R, also plug the left plug into SPEAKER
JACK L (as shown in FIG. 3). Wrap the remaining wire behind each speaker box.
FIG.3
LOCK TAB
NOTE: This set can be used with speaker boxes attached to the main set or
separated, just make sure both speaker plugs are plugged into the jacks.
To remove the speakers, press the lock tab and raise the speakers.
6
IB-CD1493(AD-63E)-WM-E-030404
PLAYING A CD
CD door
POWER button
PUSH/OPEN area
PLAY/PAUSE button
FUNCTION
switch
Connect the supplied AC power cord or batteries (see page 5).
POWER
1
Press the POWER button, the POWER/
BATT. lamp will be steadily on.
Slide the FUNCTION switch to CD
2
3
position,
“
” will show on the display.
Open the CD DOOR by pressing PUSH/
OPEN area and push a CD disc down
onto the center spindle. The label side
of the CD should face upward.
4
Close the CD door by pushing it down.
The display will show the total tracks of
the CD.
5
Press the CD PLAY/PAUSE button. The
PLAY/PROG. lamp will be steadily on, the
player plays all the tracks once.
TIP:
“
” WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD
COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.
7
IB-CD1493(AD-63E)-WM-E-030404
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
Open the CD DOOR
by pressing here
PLAY/PAUSE
STOP
SKIP/SEARCH
BACKWARD
SKIP/SEARCH
FORWARD
TIP
VOLUME control
FUNCTION switch
• When CD play is
To
Press or Adjust
paused,
the
current playing
track number will
flash and no music
will play.
Adjust the volume
Stop playback
VOLUME control
STOP
• To resume play,
PLAY/PAUSE
press the PLAY/
The current playing track
number will flash during pause.
Press again to resume play
after pause.
PAUSE
button Pause playback
again, the track
number will stop
flashing and music
will play.
Go to the next track
FORWARDS
• If you bump the set
or the table it is
sitting on, during CD
play, the music will
stop or skip for a few
seconds. This is
normal for this type
of player.
Go back to the previous
track
BACKWARDS
or
Press and hold down while
playing until you find the point.
Locate a point in a song
Press PUSH/OPEN area
(press STOP first).
Remove the CD
Turn off the power
8
Press the POWER button, the
display will go off.
IB-CD1493(AD-63E)-WM-E-030404
PLAYING CD TRACKS REPEATEDLY
(REPEAT PLAY)
You can play CD tracks over and over in normal or programmed play mode (see
page 10).
POWER button
PROG./REPEAT button
PLAY/PAUSE
SKIP/SEARCH
BACKWARD
SKIP/SEARCH
FORWARD
FUNCTION switch
1. Press the POWER button, the POWER/BATT. lamp will be steadily on.
2. Slide the FUNCTION switch to CD position.
3. Select the track by pressing
or
, and then press
.
4. Press the PROG./REPEAT button.
To repeat
Press
Display shows
Press the PROG./REPEAT
button once, the REPEAT lamp
will be steadily on.
a single track (song)
Press the PROG./REPEAT
button twice, the REPEAT lamp
will flash.
all the tracks (all songs)
programmed tracks
During programmed play, press
the PROG./REPEAT button
twice, both the REPEAT and
PLAY/PROG. lamps will flash.
To cancel Repeat Play
Press the PROG./REPEAT button until the REPEAT lamp goes off.
9
IB-CD1493(AD-63E)-WM-E-030404
PLAYING CD TRACKS IN PROGRAMMED OR
RANDOM ORDER
PROG./REPEAT
PLAY/PAUSE
BACKWARD
FORWARD
RANDOM
1. Programmed Play
You can make a program of up to 16 tracks in the order you want them to be
played.
1. Slide the FUNCTION switch to CD position. Make
sure the CD is stopped.
2. Press the PROG./REPEAT button. The letters
“
” will show and the PLAY/PROG. lamp will
flash.
3. Press
or
to select the tracks you want to
program in the order you want.
4. Press the PROG./REPEAT button to confirm. The
letters “
” will show and the PLAY/PROG. lamp
will flash.
5. Repeat above steps 3 and 4. You can program up
to 16 tracks (the display will show “
”, “
”
… “
” for program number 11 to 16).
to start programmed play. The PLAY/
6. Press
PROG. lamp will flash.
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the power is shut off or the CD door
is opened.
To cancel the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button, then slide the FUNCTION switch to TAPE position.
2. Random Play
To play the songs in random order
Press the RANDOM button in STOP mode or during playing, the set will play all
of the songs in random order. The floating symbol “
and the current track number will show in turn in the display.
”
To resume normal play
Press the RANDOM button again, the player will start playing normally.
10
IB-CD1493(AD-63E)-WM-E-030404
LISTENING TO THE RADIO
1
4
5
2
3
Connect the supplied AC power cord or batteries (see page 5).
POWER
Press the POWER button, the POWER
1
2
lamp will be steadily on.
Slide the FUNCTION switch to RADIO
position.
Slide the BAND switch to the proper band
position (AM, FM or FM STEREO) that
you want.
3
Tune into the station you prefer using
the TUNING control. Adjust for the
clearest sound.
4
5
The FM STEREO indicator will light up
when receiving an FM Stereo broadcast.
11
IB-CD1493(AD-63E)-WM-E-030404
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
VOLUME
control
FUNCTION switch
BAND switch
TIP
To
Press or Set
If the FM broadcast is
•
noisy, slide the BAND
switch from FM
STEREO to FM.
Adjust the volume
VOLUME control
Slide the FUNCTION
switch to TAPE position or
press the POWER button.
Next time you want to
listen to the radio, just
slide the FUNCTION
switch to RADIO
position. The player
will automatically start
playing the previously
tuned station.
•
Turn off the Radio
The AM antenna is
magnetic bar within the
system. Change position
of the set for the best AM
reception.
To improve AM broadcast
reception
Change position of the
antenna for FM or FM
STEREO reception.
To improve FM broadcast
reception
Change position of the
antenna for FM or FM
Stereo reception.
Change position of the set
for best AM reception.
12
IB-CD1493(AD-63E)-WM-E-030404
PLAYING A TAPE
POWER button
FUNCTION
switch
PLAY button
STOP/EJ. button
Connect the supplied AC power cord or batteries (see page 5).
POWER
Press the POWER button, the
POWER/BATT. lamp will be
steadily on.
1
2
Slide the FUNCTION switch to
TAPE position.
Press the STOP/EJECT button
INSERT TAPE THIS WAY
FULL REEL ON LEFT
3
to open the tape compartment
and insert a recorded tape.
Close the door.
STOP/EJ.
Press the PLAY button. The
4
5
player turns on and starts
playing.
PLAY
When the set finishes playing
one side of the tape, the set
will automatically stop. To hear
the other side of the tape, flip
the tape over, then insert and
press PLAY.
AUTO STOP
13
IB-CD1493(AD-63E)-WM-E-030404
RECORDING ON A TAPE
FUNCTION
switch
PLAY button
STOP/EJ. button
RECORD button
REWIND button
Connect the supplied AC power cord or batteries (refer to page 5).
Press the STOP/EJ. button to open
the tape compartment and insert a
blank tape. Select the program
source (AM, FM, CD, or built-in
1
2
STOP/EJ.
microphone) you want to record.
To record from the CD player. Slide
the FUNCTION switch to CD
position, and insert a CD, then follow
the CD playing steps to play.
INSERT TAPE THIS WAY
FULL REEL ON LEFT
To record from a radio. Slide the
FUNCTION switch to RADIO
position, and tune into the station
that you want.
To record from the built-in
microphone, slide the FUNCTION
switch to TAPE position, and speak
in front of the set.
Press the RECORD button to start
recording. (The PLAY button is
depressed automatically.)
3
4
To hear what you recorded, slide the
FUNCTION switch to TAPE position,
then press REWIND and PLAY.
14
IB-CD1493(AD-63E)-WM-E-030404
USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS
VOLUME control
FUNCTION
switch
PLAY
FAST F.
PAUSE
RECORD
REWIND
STOP/EJ.
Connect the supplied AC power cord or batteries (refer to page 5).
To
Press or Adjust
Adjust the volume
VOLUME control
Stop playback or recording
STOP/EJ. button
Fast forward or rewind the
tape
FAST F. or REWIND button
PAUSE button
Press again to resume play or recording
after pause.
Pause playback or recording
Eject the cassette
To shut power off
STOP/EJ. button
Make sure cassette buttons are all up (stop)
and POWER lamp is turned off.
15
IB-CD1493(AD-63E)-WM-E-030404
PRECAUTIONS
On Safety
On Power Sources
For battery operation, use 8 size “C”
As the laser beam used in the CD
•
•
player section may be harmful to the
eyes, do not attempt to disassemble
the cabinet. Refer servicing to
qualified personnel only.
batteries. We recommend alkaline
batteries for longer life.
When the batteries will not be used
•
for a few weeks or more, remove
them to avoid damage that can be
caused by battery leakage or
corrosion.
Should any solid object or liquid fall
•
into the player, unplug the player, and
have it checked by qualified personnel
before operating it any further.
On Operation
If the player is brought directly from a
•
On Placement
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the player has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.
Do not leave the player in a location
•
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.
Do not place the player on an inclined
or unstable place.
•
Do not place anything within 1 inch
•
of the back of the cabinet. The
ventilation holes must not be covered
for the player to operate properly and
prolong the life of its components.
This player is designed to be played
•
on
a
stable no vibration position. If
you bump the set during CD play, the
music will stop or skip for a few
seconds. This is normal for this type
of player.
If the player is left in a car parked in
•
the sun, be sure to choose a location
in the car where the player will not be
subjected to the direct rays of the sun.
Since a strong magnet is used for the
•
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the speakers to
prevent possible damage from the
magnets.
16
IB-CD1493(AD-63E)-WM-E-030404
PRECAUTIONS (continued)
Notes on CDs
Notes on Cassettes
Before playing, clean the CD with a
Break off the cassette recording tabs
•
•
cleaning cloth. Wipe the CD from the
center out.
from side A or B to prevent accidental
recording.
Side A
Tab for side A
Tab for side B
Do not use solvents such as benzine,
•
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
To record on a tape with its tab broken
off, cover the respective tab hole for
side A or B with adhesive tape.
•
Do not expose the CD to direct
•
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car and result in a damaged CD.
Use of a cassette with more than 90
•
minutes, such as C-120 (120
minutes), is not recommended.
The extreme thinness of this tape
may damage this set.
Do not stick paper or stickers on the
CD, nor scratch the CD.
After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking
error or skipping.
•
•
To reduce the chances of tape
•
jamming or tangling, you should check
that there are no loose layers of tape
visible through the cassette center
window. If any, tighten these loose
layers of tape using a pencil before
inserting the cassette into the set.
17
IB-CD1493(AD-63E)-WM-E-030404
MAINTENANCE
Cleaning the Lens
Notes for Storing
Cassette Tapes
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
1. Do not put a tape near a magnetic
field, such as a TV, or speaker.
Magnetic fields may reduce the tape
sensitivity or even erase the
recording.
2. Do not store tape for any length of
time in a hot, moist or dusty place.
Cleaning the Tape Heads
Wipe the heads, the pinch roller and
the capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
Cleaning the Cabinet
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
water or a mild detergent solution. Do
not use any type of abrasive pad,
scouring powder, or solvent, such as
alcohol or benzine.
NOTE: In order to see and clean the
head, you may have to press
PLAY first.
18
IB-CD1493(AD-63E)-WM-E-030404
TROUBLE SHOOTING
Remedy
Problem
Insert the AC plug into a wall outlet securely.
•
Make sure the batteries are installed
The power is not on.
There is no sound.
•
correctly and they are fresh.
Make sure the FUNCTION switch is at the
right position as you want.
Adjust the volume.
•
•
•
“
” appears in the display
Insert the CD with the label side up.
even when a CD is in place.
Make sure that the CD compartment is closed.
•
Clean the CD.
•
Take out the CD and leave the CD DOOR open for
•
CD does not play.
about an hour to dry moisture condensation.
Make sure the FUNCTION switch is at CD
•
position.
Clean the CD, or replace it if the CD is badly
•
damaged.
The sound drops out.
Place the player in a location free from vibration.
Check if your batteries are fresh.
•
•
CD does not play while radio may
continue to play.
It is normal since the radio uses less power than the
•
CD player.
Replace all the batteries with new ones if they are
weak, or bring the set near a window, or rotate the
set.
•
The sound is weak or has poor
quality.
Make sure the safety tab on the cassette is
•
in place.
The RECORD button does not
function/The tape does not play.
Make sure the FUNCTION switch is at TAPE
position.
•
Clean the erasing head.
•
The tape does not erase
completely.
Replace all the batteries with new ones if they are
•
weak.
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette is in place.
•
The tape does not record.
Tape jamming or tangling.
•
Use only better quality tapes.
•
Do not use a cassette with more than 90 minutes.
•
Make sure there are no loose layers of tape visible
•
before inserting the cassette.
The sound is weak/The sound
quality is poor.
Clean the heads, pinch roller and capstan.
•
The tape has reached its end. Remove it, flip to the
other side and re-insert.
•
Cassette PLAY button pops up.
19
IB-CD1493(AD-63E)-WM-E-030404
SPECIFICATION
General Description
Power source:
AC 120V, 60Hz, 20 Watts
DC 12V (8 size “C” batteries, not included)
(Alkaline batteries are recommended)
Speakers:
4" 4 ohm
Output power:
Dimensions:
3.0W/channel
MAIN SET
SPEAKER
1
1
/ ”
Width : 6 / ”
5
2
2
1
Depth : 8 / ”
Height : 8 / ”
8 ”
2
1
8 1
/ ”
2
2
Weight : 4.4 lbs (without batteries) 1.98 lbs
CD Section
Plays disc type:
Any normal CD used in portable players
760 - 800 NM
Laser wavelength:
Tracking method:
Frequency response:
3 - spot error detection
50Hz - 15kHz +1/-2 dB
3.86 mm lens
NOTE: This CD player will play NORMAL music CDs (or CD-R CDs).
Tape Recorder Section
Frequency response: Standard normal bias cassette tape,
70Hz - 10kHz
Radio Section
Frequency range:
FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for
product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR
LACQUER FINISH.
20
IB-CD1493(AD-63E)-WM-E-030404
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship
under normal use for a period of 90 days after purchase and we will repair it free
of charge or replace it at no charge, should it become defective under this
warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or exchange,
at no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the
initial 90 day period expires, and for a period of 12 months from original purchase,
we will repair the unit covering any part(s) that need to be replaced at no charge, but
will charge for the cost of labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to
misuse, neglect or accident. This warranty does not cover broken cord or cabinet.
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. The following charges apply to repairs
beyond the warranty period: $15.00. Be sure to pack carefully and return postage
paid insured together with your money order (personal checks will not be accepted)
and sales receipt to:
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008
For customer service
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
Dial 1-800-315-5885
© 2004 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
21
IB-CD1493(AD-63E)-WM-E-030404
|