INSTALLATION INSTRUCTIONS FOR PART 99-7609G
INSTALLATION INSTRUCTIONS FOR PART 99-7609G
APPLICATIONS
INFINITI I30 2000-2001
INFINITI I35 2002-2004
99-7609G
KIT FEATURES
• DIN Head Unit Provision w/ Pocket
• ISO DIN Head Unit Provision w/ Pocket
• DDIN Head Unit Provision
• ISO Stacked Head Unit Provision
• Painted Gray to Match Factory Color & Finish
KIT COMPONENTS
• A) Radio Housing • B) Radio Housing Brackets • C) ISO Brackets • D) ISO Trim Plate
• E) DDIN Brackets • F) DDIN Trim Plate • G) Snap-In Pocket • H) (4) PPH38 Screws
B
C
D
A
E
F
WIRING & ANTENNA CONNECTIONS
G
H
(Sold Separately)
WIRE HARNESS:
• 70-7551 1995-up Nissan Amp Integration Harness
ANTENNA ADAPTER:
• 40-NI10 Nissan to Aftermarket Radio Antenna Adapter
TOOLS REQUIRED
• Phillips Screwdriver • Panel Removal Tool • Socket Wrench
METRA. THE WORLD’S BEST KITS.™
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
metraonline.com
1-800-221-0932
metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
99-7609G
99-7609G DASH DISASSEMBLY
Infiniti I30 2000-01 / I35 2002-04
Infiniti I30 2000-01 / I35 2002-04
ISO DIN HEAD UNIT PROVISION
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
A
B
C
1
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Fig. A)
A
B
C
Unclip and remove the a/c vents
above the radio. (Fig. A)
2
3
4
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
2
3
Unclip and remove the shifter panel
surrounding the shifter. (Fig. B)
Slide the head unit into the radio
opening until the side clips engage.
(Fig. B)
Remove (4) Phillips screws securing
the radio/climate control/ashtray
assembly. (Fig. C)
4
5
Snap the Trim plate into the Radio
Housing. (Fig. C)
Remove (8) Phillips screws securing
the climate control and ashtray to
the assembly. (Fig. D)
5
Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the proper
mating adapters from Metra and/or
AXXESS.
Reassemble dash in reverse order
of disassembly.
6
D
Continue to Kit Preparation
4
1
99-7609G KIT PREPARATION
99-7609G KIT ASSEMBLY
Infiniti I30 2000-01 / I35 2002-04
Infiniti I30 2000-01 / I35 2002-04
DIN HEAD UNIT PROVISION
1
Attach the radio housing brackets to
the radio housing using the supplied
(4) Phillips screws. (Fig. A)
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
A
A
2
3
Secure the climate control to the
radio housing bracket assembly
using the factory hardware. (Fig. B)
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
2
Attach the ashtray to the radio
housing bracket assembly using the
Slide the aftermarket head unit into
the cage and secure. (Fig. C)
3
factory hardware. (Fig. B)
B
B
4
Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the proper
mating adapters from Metra and/or
AXXESS.
5
Reassemble dash in reverse order
of disassembly.
C
Continue to Kit Assembly
2
3
|