User’s manual
CL80101
DECT 6.0 expansion handset
for use with AT&T models
CL81101/CL81201/CL81301/
CL82101/CL82201/CL82301/
CL82351/CL82401/CL82451/
CL82501/CL82551/CL82601
Parts checklist
Your telephone package contains the following items. Save your
sales receipt and original packaging in the event warranty service
is necessary.
User’s manual
CL80101
DECT 6.0 expansion handset
for use with AT&T models
CL81101/CL81201/CL81301/
CL82101/CL82201/CL82301/
CL82351/CL82401/CL82451/
CL82501/CL82551/CL82601
User’s manual
Cordless handset
Charger for cordless
handset with power
adapter installed
Battery
Battery for
compartment
cover
cordless handset
User’s manual
CL80101
DECT 6.0 expansion handset
for use with AT&T models
CL81101/CL81201/CL81301/CL82101/
CL82201/CL82301/CL82351/CL82401/
CL82451/CL82501/CL82551/CL82601
Table of contents
Adding and registering handsets.....................................................................8
Deregistering handsets.........................................................................................9
Troubleshooting.....................................................................................................10
Important safety information..........................................................................19
Technical specifications.....................................................................................28
Getting started
Installation
You must install and
charge the battery before
using the telephone.
See pages 6-7
STOP!
for easy instructions.
Your product may be shipped with a protective sticker covering the
handset or telephone base display - remove it before use.
For customer service or product information, visit our website at
In Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base too close to:
• Communication devices such as television sets, VCRs, or other
cordless telephones.
• Excessive heat sources.
• Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
• Excessive dust sources such as a workshop or garage.
• Excessive moisture.
• Extremely low temperature.
• Mechanical vibration or shock such as on top of a washing
machine or workbench.
1
Getting started
Quick reference guide - handset
CHARGE indicator
On when the handset is charging in the
telephone base or charger.
MUTE/DELETE
During a call, press to mute the microphone.
While reviewing the caller ID history, the
directory or the redial memory, press to delete
an individual entry.
While predialing, press to delete digits.
PHONE/FLASH
Press to make or answer a call.
During a call, press to answer an incoming call
when you receive a call waiting alert.
1
While reviewing a call log entry, press
repeatedly to add or remove 1 in front of the
telephone number before dialing or saving it in
the directory.
TONE
Press to switch to tone dialing temporarily
during a call if you have pulse service.
/SPEA�ER
Press to switch between the speakerphone
and the handset.
REDIAL/PAUSE
Press repeatedly to view the last 10 numbers dialed.
While entering numbers, press and hold to insert
a dialing pause.
2
Getting started
Quick reference guide - handset
pDIR/VOLUME
Press pDIR to show directory entries.
Press to scroll up while in menus.
While entering names or numbers, press to
move the cursor to the right.
Press to increase the listening volume when
on a call.
Press to increase the message playback volume
(for models with built-in answering system only).
MENU/SELECT
Press to show the menu.
While in the menu, press to select an item or
save an entry or setting.
qCID/VOLUME
Press qCID to show caller ID history.
Press to scroll down while in menus.
While entering names or numbers, press to
move the cursor to the left.
Press to decrease the listening volume when
on a call.
Press to decrease the message playback
volume (for models with built-in answering
system only).
OFF/CANCEL
During a call, press to hang up.
While in a menu, press to cancel an operation,
back up to the previous menu, or exit the menu
display, or press and hold to exit to idle mode.
Press and hold while the telephone is not in use
to erase the missed call indicator.
# (pound key)
Press repeatedly to display other dialing
options when reviewing a call log entry.
EQ
During an outside call, intercom call, message
or announcement playback, press to change
the audio quality to best suit your hearing.
3
Getting started
Quick reference guide - handset
PUSH TO TAL�
Press to initiate a one-to-one or one-to-all broadcast.
Press and hold to broadcast to all system handsets.
Main menu
Play messages
Answering sys
Main menu
The > symbol highlights
a menu item.
Directory
Caller ID log
Intercom
Ringers
>Play messages
Answering sys
p
q
Set date/time
Settings
Website
Using menus:
• Press MENU/SELECT to show
the menu.
• Press qCID or pDIR to scroll
through menu items.
• Press MENU/SELECT to confirm
or save changes to a highlighted
menu item.
• Press OFF/CANCEL to cancel an
operation, back up to the previous
menu, or exit the menu display.
For complete instructions, refer to the manual provided with your
CL81101/CL81201/CL81301/CL82101/CL82201/CL82301/CL82351/
CL82401/CL82451/CL82501/CL82551/CL82601 telephone system.
If you are unable to find your manual, go to
www.telephones.att.com to read and/or download the manual.
4
Getting started
Charger installation
Install the charger as shown below.
Plug the power adapter into an
electrical outlet not controlled by
a wall switch.
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a replacement
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
5
Getting started
Battery installation and charging
Install the battery as shown on page 7. Once you have installed
the battery, the screen indicates the battery status (see the table
below). If necessary, place the handset in the telephone base or
charger to charge the battery. For best performance, keep the
handset in the telephone base or charger when not in use. The
battery is fully charged after 10 hours of continuous charging. See
the table on page 28 for battery operating times.
If the screen shows Place in charger and flashes, you need to
charge the handset without interruption for at least 30 minutes to
give the handset enough charge to use the telephone for a short
time. The following table summarizes the battery charge indicators
and actions to take.
Battery indicators
Battery status
Action
The screen is blank, Battery has no or
Charge without interruption until
or shows Place in
charger and
(flashing).
very little charge. The
the screen shows Low battery
handset cannot be used. or HANDSET X (at least 30
minutes).
The screen shows
Low battery and
(flashing).
Battery has enough
Charge without interruption until
charge to be used for a the screen shows HANDSET X (at
short time.
least 30 minutes).
The screen shows
Battery is charged.
To keep the battery charged,
place it in the telephone base or
charger when not in use.
HANDSET X.
NOTE: If you are on a phone call in low battery mode, you hear four short
beeps every minute.
6
Getting started
Battery installation and charging
Step 1
Step 2
Plug the battery
Align the cover
flat against
the battery
compartment,
then slide it
upwards until it
clicks into place.
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
Insert the supplied
battery with the label
THIS SIDE UP facing up
as indicated.
CHARGE light
Step 3
Charge the handset by placing it face forward in the
telephone base or charger. The CHARGE light on the
top of the handset is on during charging.
After you install your telephone or power returns following a power
outage, the handset will prompt you to set the date and time. For
instructions, see Set date/time in the telephone system user’s
manual for details. To skip setting the date and time, press
OFF/CANCEL.
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT166342). To order, visit our website at
In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
7
Registration and deregistration
Adding and registering handsets
Before using a new CL80101 handset, you must register it with the AT&T
CL81101/CL81201/CL81301/CL82101/CL82201/CL82301/CL82351/
CL82401/CL82451/CL82501/CL82551/CL82601 telephone system
(purchased separately). The telephone system can support up to 12
handsets.
The handsets provided with your telephone system are already
registered as HANDSET 1 and so forth. Additional handsets
registered to the telephone system are assigned in sequential
order they are registered (up to HANDSET 12).
You must register each handset separately. When first purchased, all
expansion handsets show Put HS on BASE to register.
Register a handset to your telephone base
1. Make sure the handset is out of the telephone
Put HS on BASE
base or charger and shows Put HS on BASE to
to register
register before you begin registration.
2. Put the handset you wish to register on the
telephone base cradle.
Registering...
3. The screen shows Registering... Please wait
Please wait
and the IN USE light turns on. It takes up to 90
seconds to complete registration. Then
HANDSET X Registered appears on the screen,
with HANDSET being the handset name and X
being the handset number (1-12). The handset
HANDSET X
Registered
beeps and the IN USE light turns off. The handset
is now registered with the telephone base.
If registration fails, Registration failed appears on the
screen. Start again from Step 1 above.
NOTES:
•
•
You cannot register a handset if any other system handset is in use.
To reset the telephone, unplug the power and the battery for a few seconds then
plug them back in.
8
Registration and deregistration
Deregistering handsets
You may need to deregister your handsets if:
• You have 12 registered handsets and need to replace a handset.
-OR-
• You wish to change the designated handset number of your
registered handsets.
You must first deregister ALL the handsets, and then register each
handset you wish to use again, one at a time.
Please read carefully through all the instructions on this page
before beginning the deregistration process.
Deregister all handsets from your telephone base
1. Press and hold /HANDSET LOCATOR on the
telephone base until the IN USE light starts to
flash (about 10 seconds), then release the
/HANDSET LOCATOR button.
2. Immediately press /HANDSET LOCATOR again
while the IN USE light is still flashing. (The light flashes for about
seven seconds. If the light stops flashing, pick up the handset and
place it back into the telephone base, then start again with Step 1 above.)
3. It takes up to 10 seconds to complete deregistration. Wait for the
cordless handset screen to display Put HS on BASE to register.
4. To register the handset(s) to the telephone base again, follow the
instructions on page 8.
After you deregister the handset(s), the system’s date and time
need to be reset. For instructions, see Set date/time in the
telephone system user’s manual for details. To skip setting the
date and time, press OFF/CANCEL.
NOTES:
•
If the deregistration process is not successful, you might need to reset the system
and try again. To reset, unplug the power from the telephone base and plug it back in.
•
•
You cannot deregister the handset(s) if any other system handset is in use.
Even if the battery is depleted, you can still deregister the handset by following the
steps above. After the handset is charged for at least 10 minutes, the screen shows
Put HS on BASE to register.
9
Appendix
Troubleshooting
If you have difficulty with your phone, please try the suggestions
below. For Customer Service, visit our website at
In Canada, dial 1 (866) 288-4268.
The handset registration is unsuccessful.
• Follow the handset registration instructions to register the handset
again (see Adding and registering handsets on page 8).
My telephone doesn’t work at all.
• Make sure the power cord is securely plugged in.
• Make sure you plug the battery connector securely into the
cordless handset.
• Make sure you plug the telephone line cord securely and firmly
into the telephone base and the telephone wall jack.
• Charge the battery in the cordless handset for at least 10 hours.
For optimum daily performance, return the cordless handset to
the charger when not in use.
• If the battery is depleted, it might take approximately 30 minutes
to charge the handset before it shows Low battery. See page 6
for details.
• Reset the telephone base. Unplug the electrical power. Wait for
approximately 15 seconds, then plug it back in. Allow up to one
minute for the cordless handset and telephone base to reset.
• You may need to purchase a new battery. Refer to Battery
installation and charging in this user’s manual on pages 6-7.
I cannot get a dial tone.
• Try all the suggestions above.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
10
Appendix
Troubleshooting
• If the previous suggestions do not work, disconnect the
telephone base from the telephone jack and connect the jack to
a different phone. If there is no dial tone on that phone either,
the problem is in your wiring or telephone service. Contact your
telephone service provider.
• Your line cord might be malfunctioning. Try installing a new line cord.
I cannot dial out.
• Try all the suggestions above.
• Make sure you have a dial tone before dialing. The cordless
handset might take a second or two to find the telephone base
and produce a dial tone. This is normal. Wait an extra second
before dialing.
• Eliminate any background noise. Noise from a television, radio or
other appliances might cause the phone to not dial out properly.
If you cannot eliminate the background noise, try muting the
cordless handset before dialing, or dialing from another room
with less background noise.
• If other phones in your home are having the same problem,
contact your telephone service provider (charges might apply).
My cordless handset isn’t performing normally.
• Make sure you plug the power cord securely into the telephone
base. Plug the power adapter into a different, working electrical
outlet without a wall switch.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait for
15 seconds then plug it back in. Allow up to one minute for the
cordless handset and telephone base to reset.
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
11
Appendix
Troubleshooting
Out of range OR No pwr at base appears on my cordless handset.
• Ensure you plug the telephone base in properly and the power
is on.
• Place the cordless handset in the telephone base for one
minute to allow the cordless handset and base to synchronize.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait for
15 seconds then plug it back in. Allow up to one minute for the
cordless handset and telephone base to reset.
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
The batteries do not hold a charge.
• If the cordless handset is in the telephone base or charger and
the charge light is not on, refer to The charge light is off or
blinking (page 17) in this Troubleshooting guide.
• Charge the battery in the cordless handset for at least 10 hours.
For optimum daily performance, return the cordless handset to
the telephone base or charger when not in use.
• If the battery is depleted, it might take approximately 30 minutes to
charge the handset before it shows Low battery. Refer to the table
on page 6 for details.
• You might need to purchase a new battery. Refer to Battery
installation and charging in this user’s manual on pages 6-7.
I hear other calls while using my phone.
• Disconnect the telephone base from the telephone jack, and
plug in a different telephone. If you still hear other calls, call
your telephone service provider.
12
Appendix
Troubleshooting
I get noise, static, or weak signals even when I’m near the
telephone base.
• If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone line, you must install a
DSL filter between the telephone line cord and the telephone
wall jack. The filter prevents noise and caller ID problems as
a result of DSL interference. Please contact your DSL service
provider for more information about DSL filters.
• You may be able to improve the performance of your cordless
phone by installing your new telephone base as far as possible
from any other existing cordless telephone system that may
already be installed.
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
• Do not install this phone near a microwave oven or on the same
electrical outlet. You might experience decreased performance
while the microwave oven is operating.
• If you plug your phone in with a modem or a surge protector,
plug the phone (or modem/surge protector) into a different
location. If this does not solve the problem, relocate your phone
or modem farther apart from one another, or use a different
surge protector.
• Move your phone to a higher location. The phone might have
better reception in a high area.
• If the other phones in your home are having the same problem,
contact your telephone service provider (charges may apply).
I experience poor sound quality when using the speakerphone.
• For increased sound quality while using the speakerphone, place
the handset on a flat surface with the dialing keys facing up.
13
Appendix
Troubleshooting
My cordless handset does not ring when I receive a call.
• Make sure that the ringer is not off. Refer to Ringer volume
in the user’s manual provided with your CL81101/CL81201/
CL81301/CL82101/CL82201/CL82301/CL82351/CL82401/
CL82451/CL82501/CL82551/CL82601 telephone.
• Make sure you plug the telephone line cord securely into the
telephone base and telephone jack. Make sure you plug in the
power cord securely.
• The cordless handset may be too far from the telephone base.
• Charge the battery in the cordless handset for at least 10 hours.
For optimum daily performance, return the cordless handset to
the telephone base or charger when not in use.
• You may have too many extension phones on your telephone
line to allow all of them to ring simultaneously. Try unplugging
some of the other phones.
• The layout of your home or office might be limiting the
operating range. Try moving the telephone base to another
location, preferably on an upper floor.
• If the other phones in your home are having the same problem,
contact your telephone service provider (charges might apply).
• Test a working phone at the phone jack. If another phone has
the same problem, contact your telephone service provider
(charges might apply).
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
• Completely remove the battery. Replace it and place the
cordless handset into the telephone base. Allow up to one
minute for the handset to reestablish its connection with the
telephone base.
• Your line cord might be malfunctioning. Try installing a new line cord.
14
Appendix
Troubleshooting
My calls cut in and out while I’m using my cordless handset.
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
• Do not install this phone near a microwave oven or on the same
electrical outlet. You might experience decreased performance
while the microwave oven is operating.
• If you plug your phone in with a modem or surge protector, try
plugging the phone (or modem/surge protector) into a different
location. If this does not solve the problem, relocate your phone
or modem farther apart from one another, or use a different
surge protector.
• Move your telephone base to a higher location. The phone
might have better reception when installed in a high area.
• If other phones in your home are having the same problem,
contact your telephone service provider (charges may apply).
My caller ID isn’t working.
• Caller ID is a subscription service. You must subscribe to this
service from your telephone service provider for this feature to
work on your phone.
• The caller must be calling from an area that supports caller ID.
• Both your and your caller’s telephone service providers must
use caller ID compatible equipment.
• If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone line, you must install a
DSL filter between the telephone line cord and the telephone
wall jack. The filter prevents noise and caller ID problems
resulting from DSL interference. Contact your DSL service
provider for more information about DSL filters.
15
Appendix
Troubleshooting
System does not receive caller ID when on a call.
• Make sure you subscribe to caller ID with call waiting features
from your telephone service provider. Caller ID features
work only if both you and the caller are in areas offering
caller ID service, and if both telephone service providers use
compatible equipment.
I subscribe to a nontraditional telephone service that uses
my computer to establish connections, and my telephone
doesn’t work.
• Make sure your computer is powered on.
• Make sure your Internet connection is working properly.
• Make sure that the software is installed and running for your
nontraditional telephone service.
• Make sure to plug your USB telephone adapter into a dedicated
USB port on your computer. Do not plug it into a multiple port
USB hub (USB splitter) that is not powered.
• In a few rare instances, the USB port on your computer may
not have enough power. In these instances, try using a USB hub
with its own external power supply.
• If you are using a firewall, it may prevent access to your
nontraditional telephone service provider. Contact your service
provider for more information.
16
Appendix
Troubleshooting
The charge light is off or blinking.
• Make sure you plug the power and line cords in correctly
and securely.
• Unplug the electrical power. Wait for 15 seconds, then plug it
back in. Allow up to one minute for the cordless handset and
telephone base to reset.
• Clean the cordless handset, charger and telephone base
charging contacts each month with a pencil eraser or cloth.
• A blinking CHARGE light is an indication that the battery is not
connected to the handset or is missing completely. Ensure that
the battery is installed properly.
Common cure for electronic equipment.
If the telephone does not seem to be responding normally, try
putting the cordless handset in the charger. If it does not fix the
problem, do the following (in the order listed):
1. Disconnect the power to the telephone base.
2. Disconnect the cordless handset battery.
3. Wait a few minutes.
4. Connect power to the telephone base.
5. Completely remove the battery. Replace the battery and place
the cordless handset into the telephone base or charger.
6. Wait for the cordless handset to reestablish its connection with
the telephone base. Allow up to one minute for this to take place.
17
Appendix
Maintenance
Taking care of your telephone
• Your cordless telephone contains sophisticated electronic parts,
so you must treat it with care.
• Avoid rough treatment.
• Place the handset down gently.
• Save the original packing materials to protect your telephone if
you ever need to ship it.
Avoid water
• You can damage your telephone if it gets wet. Do not use the
handset in the rain, or handle it with wet hands. Do not install
the telephone base near a sink, bathtub or shower.
Electrical storms
• Electrical storms can sometimes cause power surges harmful to
electronic equipment. For your own safety, take caution when
using electric appliances during storms.
Cleaning your telephone
• Your telephone has a durable plastic casing that should retain
its luster for many years. Clean it only with a soft cloth slightly
dampened with water or mild soap.
• Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you
are wet or standing in water. If the telephone base should fall into water, DO
NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE
CORDS FROM THE WALL. Then pull the unit out by the unplugged cords.
18
AImppepndoixrtant safety information
This symbol is to alert you to important operating or servicing instructions
that may appear in this user’s manual. Always follow basic safety
precautions when using this product to reduce the risk of injury, fire, or
electric shock.
Safety information
• Read and understand all instructions in the user’s manual. Observe all markings on
the product.
• Avoid using a telephone during a thunderstorm. There may be a slight chance of
electric shock from lightning.
• Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a
spark may be created when the adapter is plugged into the power outlet, or when
the handset is replaced in its cradle. This is a common event associated with the
closing of any electrical circuit. The user should not plug the phone into a power
outlet, and should not put a charged handset into the cradle, if the phone is located
in an environment containing concentrations of flammable or flame-supporting
gases, unless there is adequate ventilation. A spark in such an environment could
create a fire or explosion. Such environments might include: medical use of oxygen
without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors;
etc.); a leak of natural gas; etc.
• Do not use this product near water, or when you are wet. For example, do not use it
in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or
laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes
in contact with any liquid, unplug any line or power cord immediately. Do not plug
the product back in until it has dried thoroughly.
• Install this product in a protected location where no one can trip over any line or
power cords. Protect cords from damage or abrasion.
• If this product does not operate normally, see the Troubleshooting section on
pages 10-17 of this user’s manual. If you cannot solve the problem, or if the
product is damaged, refer to the Limited warranty section pages 25-27. Do not
open this product except as directed in your user’s manual. Opening the product or
reassembling it incorrectly may expose you to hazardous voltages or
other risks.
• Replace batteries only as described in your user’s manual (pages 6-7). Do not burn
or puncture batteries — they contain caustic chemicals.
• This power adapter is intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling or an under-the-table/cabinet outlet.
Caution: Use only the power adapter provided with this product. To obtain
replacement, visit our website at www.telephones.att.com
a
or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
19
AImppepndoixrtant safety information
Especially about cordless telephones
• Privacy: The same features that make a cordless telephone convenient create
some limitations. Telephone calls are transmitted between the telephone base
and the handset by radio waves, so there is a possibility that your cordless
telephone conversations could be intercepted by radio receiving equipment
within range of the cordless handset. For this reason, you should not think
of cordless telephone conversations as being as private as those on corded
telephones.
• Electrical power: The telephone base of this cordless telephone must be
connected to a working electrical outlet which is not controlled by a wall switch.
Calls cannot be made from the handset if the telephone base is unplugged,
switched off or if the electrical power is interrupted.
• Potential TV interference: Some cordless telephones operate at frequencies
that may cause interference to TVs and VCRs. To minimize or prevent such
interference, do not place the telephone base of the cordless telephone near
or on top of a TV or VCR. If interference is experienced, moving the cordless
telephone farther away from the TV or VCR will often reduce or eliminate the
interference.
• Rechargeable batteries: This product contains nickel-metal hydride rechargeable
batteries. Exercise care in handling batteries in order not to create a short
circuit with conductive material such as rings, bracelets, and keys. The battery or
conductor may overheat and cause harm. Observe proper polarity between the
battery and the battery charger.
• Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe
manner. Do not burn or puncture. Like other batteries of this type, if burned or
punctured, they could release caustic material which could cause injury.
The RBRC™ Seal means that the manufacturer is voluntarily
participating in an industry program to collect and recycle nickel-
metal hydride rechargeable batteries when taken out of service
within the United States. These batteries may be taken to a
participating local retailer of replacement batteries or recycling
center. Or you may call 1 (800) 8-BATTERY for locations accepting
spent Ni-MH batteries.
20
AImppepndoixrtant safety information
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led
a multidisciplinary evaluation of the interference between portable wireless
telephones and implanted cardiac pacemakers. Supported by the U.S. Food and
Drug Administration, WTR recommends to physicians that:
Pacemaker patients
Should keep wireless telephones at least six inches from the pacemaker.
Should NOT place wireless telephones directly over the pacemaker, such as in a
breast pocket, when it is turned ON.
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from
other persons using wireless telephones.
Especially about telephone answering systems
Two-way recording: This unit does not sound warning beeps to inform the other
party that the call is being recorded. To ensure that you are in compliance with any
federal or state regulations regarding recording a telephone call, you should start
the recording process and then inform the other party that you are recording the
conversation.
SAVE THESE INSTRUCTIONS
21
Appendix
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements
adopted by the Administrative Council for Terminal Attachments (ACTA). The label on
the back or bottom of this equipment contains, among other things, a product identifier
in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone
service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the
telephone network must comply with the applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular jack
that is also compliant. An RJ11 jack should normally be used for connecting to a single
line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you
may connect to your telephone line and still have them ring when you are called. The
REN for this product is encoded as the 6th and 7th characters following the US: in
the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less. For more information, please contact your
telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm
dialing equipment connected to your telephone line, ensure the connection of this
equipment does not disable your alarm equipment. If you have questions about what
will disable the alarm equipment, consult your telephone service provider or a qualified
installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until
the problem has been corrected. Repairs to this telephone equipment can only be
made by the manufacturer or its authorized agents. For repair procedures, follow the
instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service
provider may temporarily discontinue your telephone service. The telephone service
provider is required to notify you before interrupting service. If advance notice is not
practical, you will be notified as soon as possible. You will be given the opportunity
to correct the problem and the telephone service provider is required to inform you
of your right to file a complaint with the FCC. Your telephone service provider may
make changes in its facilities, equipment, operation, or procedures that could affect the
proper functioning of this product. The telephone service provider is required to notify
you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid
compatible.
If this product has memory dialing locations, you may choose to store emergency
telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test
emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
22
Appendix
FCC Part 68 and ACTA
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference, including
interference that may cause undesired operation.
The term ‘’IC:‘’ before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The
REN is an indication of the maximum number of devices allowed to be connected
to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of
all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.
23
Appendix
FCC Part 15
This equipment has been tested and found to comply with the requirements for a
Class B digital device under Part 15 of the Federal Communications Commission
(FCC) rules. These requirements are intended to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. Privacy of communications may not be ensured when
using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio
frequency energy that can be safely absorbed by a user or bystander according
to the intended usage of the product. This product has been tested and found to
comply with the FCC criteria. The handset may be safely held against the ear of the
user. The telephone base shall be installed and used such that parts of the user’s
body other than the hands are maintained at a distance of approximately 20 cm (8
inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.
24
Appendix
Limited warranty
The AT&T brand is used under license - any repair, replacement or warranty service, and
all questions about this product should be directed to our website at
dial 1 (866) 288-4268.
1. What does this limited warranty cover?
The manufacturer of this AT&T-branded product warrants to the holder of a valid
proof of purchase (“CONSUMER” or “you”) that the product and all accessories
provided in the sales package (“PRODUCT”) are free from defects in material and
workmanship, pursuant to the following terms and conditions, when installed
and used normally and in accordance with the PRODUCT operating instructions.
This limited warranty extends only to the CONSUMER for products purchased and
used in the United States of America and Canada.
2. What will be done if the PRODUCT is not free from defects in materials and
workmanship during the limited warranty period (“materially defective
PRODUCT”)?
During the limited warranty period, the manufacturer’s authorized service
representative will repair or replace at the manufacturer’s option, without charge,
a materially defective PRODUCT. If the manufacturer repairs the PRODUCT,
they may use new or refurbished replacement parts. If the manufacturer
chooses to replace the PRODUCT, they may replace it with a new or refurbished
PRODUCT of the same or similar design. The manufacturer will retain defective
parts, modules, or equipment. Repair or replacement of the PRODUCT, at the
manufacturer’s option, is your exclusive remedy. The manufacturer will return
repaired or replacement products to you in working condition. You should expect
the repair or replacement to take approximately 30 days.
3. How long is the limited warranty period?
The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the
date of purchase. If the manufacturer repairs or replaces a materially defective
PRODUCT under the terms of this limited warranty, this limited warranty also
applies to repaired or replacement PRODUCT for a period of either (a) 90 days
from the date the repaired or replacement PRODUCT is shipped to you or (b) the
time remaining on the original one-year limited warranty; whichever is longer.
4. What is not covered by this limited warranty?
This limited warranty does not cover:
• PRODUCT that has been subjected to misuse, accident, shipping or other
physical damage, improper installation, abnormal operation or handling,
neglect, inundation, fire, water, or other liquid intrusion; or
• PRODUCT that has been damaged due to repair, alteration, or modification by
anyone other than an authorized service representative of the manufacturer; or
25
Appendix
Limited warranty
• PRODUCT to the extent that the problem experienced is caused by signal
conditions, network reliability or cable or antenna systems; or
• PRODUCT to the extent that the problem is caused by use with non-AT&T
accessories; or
• PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or
electronic serial numbers have been removed, altered or rendered illegible; or
• PRODUCT purchased, used, serviced, or shipped for repair from outside the
United States of America or Canada, or used for commercial or institutional
purposes (including but not limited to products used for rental purposes); or
• PRODUCT returned without valid proof of purchase (see item 6 below); or
• Charges for installation or setup, adjustment of customer controls, and
installation or repair of systems outside the unit.
5. How do you get warranty service?
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
NOTE: Before calling for service, please review the user’s manual; a check of the
PRODUCT’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage
during transit and transportation and are responsible for delivery or handling
charges incurred in the transport of the PRODUCT(s) to the service location.
The manufacturer will return repaired or replaced PRODUCT under this limited
warranty to you. Transportation, delivery or handling charges are prepaid. The
manufacturer assumes no risk for damage or loss of the PRODUCT in transit.
If the PRODUCT failure is not covered by this limited warranty, or proof of
purchase does not meet the terms of this limited warranty, the manufacturer
will notify you and will request that you authorize the cost of repair prior to any
further repair activity. You must pay for the cost of repair and return shipping
costs for the repair of products that are not covered by this limited warranty.
6. What must you return with the PRODUCT to get warranty service?
You must:
• Return the entire original package and contents including the PRODUCT to
the service location along with a description of the malfunction or difficulty;
and
• Include a “valid proof of purchase” (sales receipt) identifying the PRODUCT
purchased (PRODUCT model) and the date of purchase or receipt; and
• Provide your name, complete and correct mailing address, and telephone
number.
26
Appendix
Limited warranty
7. Other limitations
This warranty is the complete and exclusive agreement between you and the
manufacturer of this AT&T branded PRODUCT. It supersedes all other written
or oral communications related to this PRODUCT. The manufacturer provides
no other warranties for this PRODUCT. The warranty exclusively describes all of
the manufacturer’s responsibilities regarding the PRODUCT. There are no other
express warranties. No one is authorized to make modifications to this limited
warranty and you should not rely on any such modification.
State/Provincial Law rights: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state or province
to province.
Limitations: Implied warranties, including those of fitness for a particular purpose
and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary
use) are limited to one year from date of purchase. Some states/provinces
do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. In no event shall the manufacturer be liable for
any indirect, special, incidental, consequential, or similar damages (including,
but not limited to lost profits or revenue, inability to use the PRODUCT or other
associated equipment, the cost of substitute equipment, and claims by third
parties) resulting from the use of this PRODUCT. Some states/provinces do not
allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
27
Appendix
Technical specifications
RF frequency band
1921.536MHz - 1928.448MHz
Channels
5
Operating temperature
32°F - 122°F
0°C - 50°C
Telephone base voltage
(AC voltage, 60Hz)
96Vrms - 130Vrms
Telephone base voltage
(AC adapter output)
6VDC @ 400mA
Handset voltage
2.4VDC - 3.2VDC
6VAC @ 300mA
Charger voltage
(AC adapter output)
Operation
Operating time*
Up to seven hours
Talk time (cordless handset)
Talk time (cordless handset speakerphone) Up to five hours
Standby Up to seven days
* Operating times vary depending on your actual use and the age of the battery.
DECT 6.0 digital technology
The AT&T DECT 6.0 products offer unsurpassed range performance and sound
clarity. This is achieved through a unique antenna design and advances in noise-
filtering technology. An independent laboratory has confirmed that AT&T DECT 6.0
products perform up to 45% better in range competitions. Now calls can be taken in
the basement, backyard and garage with exceptional sound quality.
Telephone operating range
This cordless telephone operates within the maximum power allowed by the Federal
Communications Commission (FCC). Even so, this handset and telephone base can
communicate over only a certain distance — which can vary with the locations of
the telephone base and handset, the weather, and the construction of your home
or office.
Redefining long range coverage and clarity
This telephone base comes with an antenna which gives much better clarity and
covers a longer range than before.
28
© 2010 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 1 AT&T 11/10.
|
HP Hewlett Packard HP D2836A User Manual
Hobart CG711 User Manual
GE TRIVECTION JT930 User Manual
Electrolux 922019 User Manual
Electrolux 60 TC User Manual
Diamond Multimedia Radeon X1650AGP256 User Manual
Dell Computer Monitor 1908FPBL User Manual
Dell Computer Hardware EN 60950 User Manual
Buffalo Technology Computer Drive DriveStation Combo USB 2 0 and Firewire Hard Drive User Manual
AT T CL81301 User Manual